Getting error in activating transformation in BI content

Hi Experts,
When I am activating this transformation CUBE 0PA_C01 -> CUBE 0TMC_C02 in bi content, I am getting error "Endroutine: Syntax error in routine".
I checked the end routine and checked it and received following msg:
E:The data object "LS_RESULT" has no component called "POT_VL_K", but there is a component called "POT_VL_C"
Since this is standard routine I cannot edit it.
Any suggestions..
Thanks,
Ravi

Hi,
But I am getting other errors while activating other transformations also which are as follows:
1. Transformation- TRCS 0PA_TMC_11 -> ODSO 0TMC_DS11
error message: Error in end routine
E:The data object "LS_RESULT" does not have a component called "NOM_STATUS".
2. Transformation- ODSO 0TMC_DS11 -> CUBE 0TMC_C01
Error while activating transformation Message no. RSTRAN510
3. In another transformation. The following infobject is kef figure.
Error:
InfoObject 0ACTION_CNT (version A) is not compounded
P.S: The solution provided by you in previous message needs to modify routine. But since this is standard routine how can i do it? Did you implement on your side?
Full points if issue is resolved.
Thanks,
Ravi

Similar Messages

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while activating Transformation CO_OM_WBS_3

Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
Sunder

Dear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM

Error while activating transformations? can you please help me

Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath

Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..

Error in activating Transformation

Hi Gurus
We are using BI 7.0 and when we use amonut as a data type for one of the key figure ( Revenue ) , I am getting an error when I am trying to activate the transformation.
Do you know which OSS note/ Support pack we have to apply?
Thanks

Hi all
I have added currency also and activated inforprovider also but still I am getting error during activating the transformation. The fields are mapped already.
The error message is given below.
*Rule 4 ( Traget Z_PPRC ) Target parameter 0007 is not being used.
*Rule ( Tarhget field Z_PPRC ) No source field assigned
However I have already assigned the source to target in transformation and added currency also.
do you know if I need to install some OSS note/Patch?

Error while activating transformation in BI 7.0

HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
Sheela

Hi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Error while activating Transformation RSO404

Hi All,
When i am activating a transformation i am getting this error. The transformation was not getting active. Can u please let me know why it was happening. There are no syntax errors in the routine or in the start routine.
regards,
mahesh.

Hi Jin,
I also checked that one but it was not showing any errors. Why i got this problem is we have a start routine in this one when i am loading data into that it was getting an error that there was a problem in start routine.
So, what i have done i commented the start routine and again activated the transformation it thrown an error. again i uncommented the start routine and start doing activation it was throwing the same error. Can u please reply if u can understand my question or not.
regards,
mahesh.

Getting error while activating the template in sharepoint2013

Hi,
I am getting the following error while activating template in SharePoint-2013.
Please guide me on this.Thanks in advance.

can you provide error details from ULS logs using correlation Id
http://www.sharepoint-journey.com/powershell.html
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Getting error while activating Infosource

Hi Bw Guru's
I have enhanced 3.x data source with new fields and replicated the same in BI.
I have created Transfermation between DS(Data Source) and Infos source(IS).
Then created Transfermation btween IS and Data target DSO.
Our data source feeding more than one data target.
What i done is included new info object in IS and try to activate it where i am getting error say that
Error message "You use this key to determine how you want to use aggregation in the transformation."
Please advise me in this issue

Hi Aryan,
I understood your scenario..
See what yuo have..
Data Source <--transformation->Infosource<-transformation->Data target..
When you modify the Infosource and try to activate it, it gives error, because there are two transformations that are dependent on this infosource.. and on trying to activate they become inconsistent..
The best approach i would suggest is, delete both the transformations.. If they contain routines, just copy them in to notepad and keep aside..
Make changes to info source and activate it..
Now recreate the transformations.. paste the routines if there were any and activate the transformations.. this wont take too much effort as creating the transformation is not a big deal..
And i feel that the error you are getting is because of the transformation between IS and Data target.. so try by only deleting it first..
Thanks and Best Regards,
Vikas Bittera.

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Trying to install Premiere Elements 10 on Windows 7 but keep getting error message 'A reduced set of content has been installed' - help!

We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
Thank you!
Adobe Premiere Elements 10.0
Windows
2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)

cathyj
Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
http://www.adobe.com/special/premiereel/downloads/
We will be watching for your progress.
ATR

Getting Error in Activation

Hi Experts,
I am having error in activating my own created table.
My table name : ZFINAL1
Getting the error like,
ZFINAL1-KWMENG (Specify reference table & reference field)
Then i given reference table 'VBAP' & reference field "KWMENG"
Again am getting the error like,
ZFINAL1-KWMENG (combination reference table/field VBAP-KWMENG does not exist)
Please tell how to solve the problem.
Thanks & Regards,
Arun Kumar

Hi Arun,
See when we use the standard data elements we must also copy their ref. table and ref. fields (specially in case of Quantity & Currency Fields).
Now you do one thing,
Goto table VBAP from SE11.
Goto to the last TAB 'Currency/Quantity Fields' and find the data element you are using in your case it is 'KWMENG'.
Now look at the Ref. Table & Ref. Field Column these are the values you will have to use in your newly created table.
Ref. Table : VBAP
Ref. Field: VRKME
Hope it helps you,
Regards,
Abhijit G. Borkar

Getting error in activating transformation in BI content

Similar Messages

Maybe you are looking for