Getting error in Cisco 3750

Dear Friends,
I am getting continuous below mentioned error in my core switch. Please help on this.
Apr 11 00:59:59.539: PRST-VBL DET - Util Set - nameval=NTPv4_Drift=0.0 and node->nameval=NTPv4_Drift=0.0.
Apr 11 00:59:59.539: PRST-VBL STD Util Set - identical NTPv4_Drift=0.0
Apr 11 00:59:59.539: PRST-VBL DET Cache unlock - ok
Apr 11 00:59:59.539: PRST-VBL API Set - ok return 15
Regards,
Shinu Mathew

Hey Shinu,
Try following:
#ntp server <Ip_address> version 2
HTH.
Regards,
RS.

Similar Messages

  • Cisco LMS 4.0 Getting Error

    I am trying to install LMS 4.0 getting errors(Attached error)

    Hi,
    Go to the software download section on Cisco website and search there for a patch that is specifically posted there for installing LMS on a Windows Server 2003 R2 machine.
    According to the readme file for LMS 4.0, you must use this "patch" if you want to install LMS on this OS. Read more in the readme document for LMS 4.0
    Please mark this as an answer for your question if it does solve your problem.
    Sent from Cisco Technical Support iPhone App

  • Unable to ping device behind Cisco 3750 on the same inside VLAN via Cisco ASA 5505 Anyconnect VPN

    Hi Guys,
    I've been stuck with this for the last 2 days, and I thought to try and use Cisco's forum, I setup my home DC, and started having problems once I moved a Cisco 5505 behind a Cisco 1841 router (I wanted to eventually test DMVPN live on the internet,) I was no longer able to ping some devices, then as soon as I introduce a collapsed core/distribution switch, I'm also no longer able to ping the devices behind the Cisco 3750, I've attached a network diagram and the ASA running-config.
    Everything seem fine internally with the exception of an intermittent network connectivity with a Citrix NetScaler VPX running on a VMware ESXi.
    For some odd reason, I am able to ping the following, with no issues.
    Cisco 3750 SVI (192.168.1.3)
    CentOS web server (connected directly to the Cisco ASA 5505)
    I have checked and enable the following:
    Nat Exemption
    Sysopt connection permit-vpn
    ACL's
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    Added ICMP in the inspection policy
    Packet-capture - Only getting echo requests.
    Thanks in advance!

    Hi,
    I believe you have the problem with your no-nat configurations..... you to exempt NAT for the traffic from 172.16.10.0 (Anyconnect VPN pool) to 192.168.1.0/24 (Inside LAN) to make this work
    object network acvpnpool
    subnet <anyconnect VPN Subnet>
    object network insidelan
    subnet <inside lan subnet>
    nat (inside,outside) source static acvpnpool acvpnpool destination static insidelan insidelan
    Make sure that you are able to reach the GW/Inside ip adress of the firewall from LAN machine.... all routing in place properly..... Thanks!!!
    Regards
    Karthik

  • Getting Error in NVRAM

    Hi,
    I'm Getting Error in router from NVRAMwhile accessing below command in privilge 4 login
    CTS-SEC-CBE#sh configuration
    Using 14350 out of 262144 bytes
    %Error opening nvram:/startup-config (Permission denied)
    The error not observed while executing the command through privilege 15 login
    Regards

    Hi,
    Please find the show version
    Router#sh version
    Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 23-Mar-12 21:00 by prod_rel_team
    ROM: System Bootstrap, Version 15.1(1r)T4, RELEASE SOFTWARE (fc1)
    CTS-CBE-PRINEW uptime is 1 week, 1 day, 13 hours, 41 minutes
    System returned to ROM by power-on
    System restarted at 08:19:26 IST Sun Oct 7 2012
    System image file is "flash0:c3900e-universalk9-mz.SPA.152-3.T.bin"
    Last reload type: Normal Reload
    Last reload reason: power-on
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE250/K9 with 740352K/308224K bytes of memory.
    Processor board ID FGL1636129B
    6 Gigabit Ethernet interfaces
    DRAM configuration is 72 bits wide with parity enabled.
    256K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        C3900-SPE250/K9       FOC16344GDA
    Technology Package License Information for Module:'c3900e'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot
    ipbase        ipbasek9      Permanent      ipbasek9
    security      None          None           None
    uc            None          None           None
    data          datak9        Permanent      datak9
    Configuration register is 0x2102

  • Getting error when trying to login to CR XI server on suse linux server

    http://www.experts-exchange.com/Database/Reporting_/Crystal_Reports/Q_21747694.html
    Hello,
    I'm getting the above error when I try to login as administrator (blank password).
    This did work until I rebooted the linux server.
    I checked there are no port conflicts (nothing is using port 6400).
    I restarted the services manually, I even rebooted server and then restarted ccm services manually but no luck. I did find this is a known problem with linux crystal reports server but nothing stated about how to resolve it.
    Finding solutions in the SAP portal is difficult! This is about as user friendly as the Cisco support website. Cisco portal is AWEFUL.
    I'm in process of getting a support contract from SAP but it's taking a long time.
    I have to state the support from SAP is a big step DOWN from the business objects support. We were able to call and speak to engineers in a few minutes.
    With SAP support I was able to talk to some foreigner (asian or indian) to tell me that there is no phone support with SAP. This after being redirected at least 4 times between departments.
    Wow! So what do the other business objects customers have to say about the SAP support?
    I can't help but wonder about moving on to another solution for publishing reports.
    A vendor who actually gives a damn about the customers.
    Oskar

    this worked until I rebooted the server.
    I'm getting error showing it's trying to connect to a mysql database 'BOE115'.
    This server does have a mysql db running on it, but that db has no instance of BOE115.
    It also shows it's trying to connect as a user that isn't on the database.
    Where can I see the script with user/password that is trying to run and connect to the mysql db?
    Also, why didn't the install create the instance and user?
    Why did this work until I rebooted?
    There is no firewall on this server, that has been disabled.
    Thank you,
    Oskar

  • Constantly getting error on UC520 Wi-Fi

    Hello,
    I am constantly getting error on UC520W Wifi from last Night, I am not getting with this error,
    Can anyone help me , what is the cause of this error, or is there any issue on UC520,
    Please suggest & help me
    .858: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001320: Jan  8 05:12:22.166: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001321: Jan  8 05:12:22.166: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001322: Jan  8 05:13:23.997: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001323: Jan  8 05:13:24.305: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001324: Jan  8 05:13:24.305: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001325: Jan  8 05:14:33.512: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001326: Jan  8 05:14:33.820: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001327: Jan  8 05:14:33.820: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001328: Jan  8 05:14:50.784: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001329: Jan  8 05:14:51.376: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001330: Jan  8 05:14:55.941: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001331: Jan  8 05:14:55.941: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001332: Jan  8 05:15:23.594: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001333: Jan  8 05:15:23.914: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001334: Jan  8 05:15:23.914: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001335: Jan  8 05:16:16.128: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001336: Jan  8 05:16:17.112: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001337: Jan  8 05:16:17.116: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001338: Jan  8 05:16:22.072: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001339: Jan  8 05:16:22.376: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001340: Jan  8 05:16:22.376: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001341: Jan  8 05:17:01.454: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001342: Jan  8 05:17:02.026: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001343: Jan  8 05:17:14.110: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001344: Jan  8 05:17:14.110: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001345: Jan  8 05:17:32.835: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001346: Jan  8 05:17:33.911: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001347: Jan  8 05:17:33.911: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001348: Jan  8 05:18:16.933: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001349: Jan  8 05:18:17.257: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001350: Jan  8 05:18:17.261: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001351: Jan  8 05:18:35.498: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001352: Jan  8 05:18:35.810: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001353: Jan  8 05:18:35.810: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001354: Jan  8 05:18:50.698: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001355: Jan  8 05:18:51.206: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001356: Jan  8 05:18:51.206: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001357: Jan  8 05:18:55.970: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001358: Jan  8 05:19:03.143: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001359: Jan  8 05:19:03.451: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001360: Jan  8 05:19:03.451: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001361: Jan  8 05:19:10.827: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001362: Jan  8 05:19:11.143: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001363: Jan  8 05:19:11.143: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001364: Jan  8 05:19:27.832: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001365: Jan  8 05:19:28.148: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001366: Jan  8 05:19:28.148: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001367: Jan  8 05:19:55.281: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001368: Jan  8 05:19:55.513: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001369: Jan  8 05:19:55.517: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001370: Jan  8 05:20:14.742: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001371: Jan  8 05:20:15.046: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001372: Jan  8 05:20:15.046: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001373: Jan  8 05:20:34.082: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001374: Jan  8 05:20:34.634: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001375: Jan  8 05:20:47.035: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001376: Jan  8 05:20:47.035: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001377: Jan  8 05:20:54.811: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001378: Jan  8 05:21:11.340: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001379: Jan  8 05:21:11.340: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001380: Jan  8 05:21:23.748: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001381: Jan  8 05:21:24.057: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001382: Jan  8 05:21:24.057: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]kya
    001383: Jan  8 05:22:20.471: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001384: Jan  8 05:22:21.003: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001385: Jan  8 05:22:25.095: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001386: Jan  8 05:22:25.095: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001387: Jan  8 05:22:39.308: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001388: Jan  8 05:22:39.644: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001389: Jan  8 05:22:39.644: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001390: Jan  8 05:22:52.832: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001391: Jan  8 05:22:53.136: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001392: Jan  8 05:22:53.140: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001393: Jan  8 05:23:24.749: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001394: Jan  8 05:23:25.133: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001395: Jan  8 05:23:25.133: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001396: Jan  8 05:25:46.851: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:6 DeviceType:Phone has unregistered abnormally.
    001397: Jan  8 05:27:20.475: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001398: Jan  8 05:27:43.084: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001399: Jan  8 05:27:43.084: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001400: Jan  8 05:27:48.696: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001401: Jan  8 05:28:04.933: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001402: Jan  8 05:28:04.933: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001403: Jan  8 05:28:09.893: %IPPHONE-6-REG_ALARM: Name=SEP001DA2314AAD Load= Last=TCP-timeout
    001404: Jan  8 05:28:10.229: %IPPHONE-6-REGISTER: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:6 DeviceType:Phone has registered.
    001405: Jan  8 05:29:03.851: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001406: Jan  8 05:29:04.159: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001407: Jan  8 05:29:04.159: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001408: Jan  8 05:29:51.725: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001409: Jan  8 05:29:52.029: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001410: Jan  8 05:29:52.033: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001411: Jan  8 05:29:59.734: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001412: Jan  8 05:30:00.042: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001413: Jan  8 05:30:00.042: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001414: Jan  8 05:30:05.878: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001415: Jan  8 05:30:06.190: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001416: Jan  8 05:30:06.190: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001417: Jan  8 05:31:16.469: %IPPHONE-6-REG_ALARM: 10: Name=SEP001BD5019982 Load= SCCP31.8-2-2SR2S Last=TCP-timeout
    001418: Jan  8 05:31:18.461: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-6:SEP001BD5019982 IP:192.168.4.175 Socket:5 DeviceType:Phone has unregistered abnormally.
    001419: Jan  8 05:31:18.461: %IPPHONE-6-REGISTER: ephone-6:SEP001BD5019982 IP:192.168.4.175 Socket:8 DeviceType:Phone has registered.
    001420: Jan  8 05:31:36.890: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001421: Jan  8 05:31:37.110: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001422: Jan  8 05:31:37.110: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001423: Jan  8 05:32:08.595: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001424: Jan  8 05:32:09.119: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001425: Jan  8 05:32:11.751: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001426: Jan  8 05:32:11.751: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    Translating "kya"...domain server (63.203.35.55)
    001427: Jan  8 05:32:49.721: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001428: Jan  8 05:32:50.125: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001429: Jan  8 05:32:50.129: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    % Unknown command or computer name, or unable to find computer address
    coinop-uc520#
    coinop-uc520#kya                sh ip dhc
    coinop-uc520#sh ip dhcp bind
    Bindings from all pools not associated with VRF:
    IP address          Client-ID/               Lease expiration        Type
         Hardware address/
         User name
    10.1.1.11           0100.1da2.314a.ad       Jan 09 2011 02:27 PM    Automatic
    192.168.2.11        0100.16d4.3c0e.99       Jan 09 2011 09:41 AM    Automatic
    192.168.2.14        0100.16ea.ee13.28       Jan 09 2011 01:22 PM    Automatic
    192.168.2.16        0100.237d.0081.4b       Jan 09 2011 02:29 PM    Automatic
    192.168.2.19        0100.0c6e.0438.e8       Jan 09 2011 12:43 PM    Automatic
    192.168.2.47        0100.0c29.e2eb.b9       Jan 08 2011 08:20 PM    Automatic
    coinop-uc520#ping
    001430: Jan  8 05:34:17.872: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:6 DeviceType:Phone has unregistered abnormally.
    001431: Jan  8 05:38:48.864: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 0016.eaee.1328 Reason: Sending station has left the BSS SSID[coinop]
    001432: Jan  8 05:38:58.460: *** Not encrypted dot1x packet from 0016.eaee.1328 has been discarded
    001433: Jan  8 05:38:58.460: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station coinop-uc520 0016.eaee.1328 Associated SSID[coinop] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001434: Jan  8 05:42:08.512: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001435: Jan  8 05:42:43.133: %DOT11-7-AUTH_FAILED: Station 001d.a231.4aad Authentication failed
    001436: Jan  8 05:42:48.725: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001437: Jan  8 05:42:48.725: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001438: Jan  8 05:43:09.406: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001439: Jan  8 05:43:09.814: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001440: Jan  8 05:43:09.818: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001441: Jan  8 05:43:16.363: %IPPHONE-6-REG_ALARM: Name=SEP001DA2314AAD Load= Last=TCP-timeout
    001442: Jan  8 05:43:16.691: %IPPHONE-6-REGISTER: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:5 DeviceType:Phone has registered.
    001443: Jan  8 05:43:44.072: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 0016.eaee.1328 Reason: Sending station has left the BSS SSID[coinop]
    001444: Jan  8 05:43:53.956: *** Not encrypted dot1x packet from 0016.eaee.1328 has been discarded
    001445: Jan  8 05:43:53.956: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station coinop-uc520 0016.eaee.1328 Associated SSID[coinop] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001446: Jan  8 05:43:57.180: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001447: Jan  8 05:43:57.540: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001448: Jan  8 05:43:58.568: %IPPHONE-6-UNREGISTER_NORMAL: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:5 DeviceType:Phone has unregistered normally.
    001449: Jan  8 05:44:01.572: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001450: Jan  8 05:44:01.572: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001451: Jan  8 05:44:10.565: %IPPHONE-6-REG_ALARM: Name=SEP001DA2314AAD Load= Last=TCP-Bad-ACK
    001452: Jan  8 05:44:12.469: %IPPHONE-6-REGISTER: ephone-11:SEP001DA2314AAD IP:10.1.1.11 Socket:5 DeviceType:Phone has registered.
    001453: Jan  8 05:45:09.259: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001454: Jan  8 05:45:09.575: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001455: Jan  8 05:45:09.575: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001456: Jan  8 05:45:22.868: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001457: Jan  8 05:45:23.176: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001458: Jan  8 05:45:23.176: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001459: Jan  8 05:46:16.934: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001460: Jan  8 05:46:17.246: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001461: Jan  8 05:46:17.246: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001462: Jan  8 05:46:27.466: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001463: Jan  8 05:46:27.770: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001464: Jan  8 05:46:27.770: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001465: Jan  8 05:46:28.198: *** Not encrypted dot1x packet from 0016.eaee.1328 has been discarded
    001466: Jan  8 05:46:35.903: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-6:SEP001BD5019982 IP:192.168.4.175 Socket:8 DeviceType:Phone has unregistered abnormally.
    001467: Jan  8 05:46:54.820: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    001468: Jan  8 05:46:55.132: *** Not encrypted dot1x packet from 001d.a231.4aad has been discarded
    001469: Jan  8 05:46:55.132: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voic

    Thanks for suggestion,
    But please look apart from 0016.eaee.1328  this MAC address, we have more error like below & I am constantly getting error  from last night, also let you know wi-fi Ip phone is working on i have post my config please suggest if anywhere is wrong
    001461: Jan  8 05:46:17.246: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station SEP001DA2314AAD 001d.a231.4aad Associated SSID[uc520-voice] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
    001462: Jan  8 05:46:27.466: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 001d.a231.4aad Reason: Previous authentication no longer valid SSID[uc520-voice]
    dot11 ssid coinop
       vlan 1
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXX
    dot11 ssid uc520-voice
       vlan 100
       authentication open
       authentication key-management wpa
       wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXX
    ip cef
    ip dhcp relay information trust-all
    ip dhcp use vrf connected
    ip dhcp excluded-address 10.1.1.1 10.1.1.10
    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp excluded-address 10.1.1.200 10.1.1.254
    ip dhcp excluded-address 192.168.2.1 192.168.2.10
    ip dhcp pool phone
       network 10.1.1.0 255.255.255.0
       default-router 10.1.1.1
       option 150 ip 10.1.1.1
    ip dhcp pool data
       network 192.168.2.0 255.255.255.0
       default-router 192.168.2.1
       dns-server 203.7.224.10 203.25.27.50
    ip name-server 63.203.35.55
    username admin privilege 15 password 7 XXXXXXXXXXXXXXXXXXXX
    archive
    log config
      logging enable
      logging size 600
      hidekeys
    ip tftp source-interface Loopback0
    bridge irb
    interface Loopback0
    ip address 10.1.10.2 255.255.255.252
    ip nat inside
    ip virtual-reassembly
    macro description cisco-phone | cisco-phone | cisco-phone | cisco-phone |  cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone |  cisco-phone | cisco-phone | cisco-phone | cisco-phone
    tunnel source XXXXXXXXXXX
    tunnel mode gre multipoint
    tunnel path-mtu-discovery
    interface Tunnel2
    no ip address
    interface FastEthernet0/0
    description $FW_OUTSIDE$
    no ip address
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface Integrated-Service-Engine0/0
    description cue is initialized with default IMAP group
    ip unnumbered Loopback0
    ip nat inside
    ip virtual-reassembly
    service-module ip address 10.1.10.1 255.255.255.252
    service-module ip default-gateway 10.1.10.2
    macro description cisco-switch | cisco-switch | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phh | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch
    interface FastEthernet0/1/0
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/1
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/2
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/3
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | ciscophone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone  | cisco-phone | ciscophone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/4
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/5
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/6
    switchport voice vlan 100
    macro description cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch |  native | cisco-phone itch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch |  native
    interface FastEthernet0/1/7
    switchport voice vlan 100
    macro description cisco-phone  | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone | cisco-phone
    interface FastEthernet0/1/8
    switchport mode trunk
    macro description cisco-switc | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switch | cisco-switc
    interface Dot11Radio0/5/0
    no ip address
    ip virtual-reassembly
    encryption vlan 100 mode ciphers tkip
    encryption vlan 1 mode ciphers tkip
    ssid coinop
    ssid uc520-voice
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    world-mode dot11d country AU both
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0/5/0.1
    encapsulation dot1Q 100
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0/5/0.2
    encapsulation dot1Q 1 native
    bridge-group 2
    bridge-group 2 subscriber-loop-control
    bridge-group 2 spanning-disabled
    bridge-group 2 block-unknown-source
    no bridge-group 2 source-learning
    no bridge-group 2 unicast-flooding
    interface Virtual-Template1
    ip unnumbered Dialer1
    ip nat inside
    ip virtual-reassembly
    peer default ip address pool IP_POOL
    no keepalive
    ppp encrypt mppe 40
    ppp authentication chap ms-chap pap
    interface Virtual-Template2 type tunnel
    ip unnumbered BVI2
    ip nat inside
    ip virtual-reassembly
    shutdown
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile SDM_Profile1
    interface Virtual-Template7 type tunnel
    ip unnumbered BVI2
    ip nat inside
    ip virtual-reassembly
    shutdown
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile SDM_Profile1
    interface Vlan1
    no ip address
    ip virtual-reassembly
    bridge-group 2
    bridge-group 2 spanning-disabled
    interface Vlan100
    no ip address
    ip virtual-reassembly
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Dialer1
    mtu 1492
    ip address negotiated
    ip mtu 1492
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    ip route-cache flow
    ip tcp adjust-mss 1492
    dialer pool 1
    dialer-group 1
    ppp authentication pap callin
    ppp chap refuse
    ppp pap sent-username [email protected] password 7 XXXXXXXXXXXXXXXXXXXX
    crypto map vpnmap
    interface BVI1
    ip address 10.1.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface BVI2
    ip address 192.168.2.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly

  • Getting %Error in authentication when using enable password via ACS 5.5

    Hey, I've been on a LAN that's been using ACS 4.1 and its been working fine.  Ive recently installed ACS 5.5 on a VM and Im attempting to get it to work.  I've changed the Tacacs IP to the new server and the secret key on this particular switch and Ive configured it in the Network devices in ACS.  When I log into the switch via SSH, it lets me authenticate to my username/password BUT when I go to enable it asks for a password.  I enter the password I configured in ACS and I get %Error in authentication.   I've also tried the local enable, same thing.  What else is weird is that if I enter no password, it prompts me to change my password but if I try that I get the same error (%Error in authentication).  The ACS log just simply says entered wrong password, even though I checked it multiple times and even tried a new account.  I'm no master at AAA but from what I can tell it should work.  Attaching my configuration....
    Any ideas would be great

    Can you share "show run | in aaa" from the switch?
    You should have the below listed commands on the switch:
    aaa authentication login default group CLI local
    aaa authorization exec default group CLI local
    On the ACS you should push priv-lvl=15 
    You may go through the below listed document for better understanding:
    http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113590-acs5-tacacs-config.html
    Regards,
    Jatin Katyal
    *Do rate helpful posts*

  • Error in Cisco 2500 series Wireless Controller

    I have this error in Cisco 2500 series  Wireless Controller 
    The AP type Cisco AIR-CAP35021-A-K9
    I cann't connect the client to AP when i try to connect i get this error on Cisco 2500 series  Wireless Controller  But the AP get ip .
    Please can any on help me . 
    Client Excluded: MACAddress:Base Radio MAC : Slot: 0 User Name: unknown Ip Address: unknown Reason:802.11 Association failed repeatedly. ReasonCode: 

    Duplicate posts.  
    Go here:   http://supportforums.cisco.com/discussion/12142556/cisco-2500-series-wireless-controller

  • "IPSECcard: an error coming back 0x007F" error on Cisco 7206vxr router having SA-VAM2+

    Hi,
    I am getting "IPSECcard: an error coming back 0x007F" error on Cisco 7206vxr router having SA-VAM2+ having IOS c7200-jk9s-mz.124-19.bin & NPE-G1
    The Configuration is like below
    crypto isakmp policy 1
    encr 3des
    hash md5
    authentication pre-share
    group 2
    lifetime 28800
    crypto ipsec transform-set kotakbank esp-3des esp-md5-hmac
    crypto ipsec df-bit clear
    Impact: After getting this error, the VPN tunnels are impacted.
    Can any one tell us the solution ?.
    Thanks...Pramod.

    Upon replacing SA-VAM2+ issue got resolved... Thanks..

  • How can I mirror all ports on CISCO 3750 switches to one Gigabyte port?

    Hi,
    I have a requirement to mirror all the ports on my 7 CISCO 3750 switches, which are in 3 separate stacks, to one single Gigabyte Ethernet port.
    Does anyone know how I can do that?
    Thanks in advance.

    Vlad, thanks a heap for your response.
    I want to apply to my sitation. Please let me know if I get them right in the following:
    Catalyst A
    vlan 901
    remote-span
    monitor session 1 source interface fastethernet 1-48 (I want to monitor all ports on the CISCO 3725)
    monitor session 1 destination remote vlan 901
    Catalyst B
    vlan 901
    remote-span (If I don't need to monitor this switch, do I still need to put anything into this switch at all?)
    Catalyst C
    vlan 901
    remote-span
    monitor session 1 source interface fastethernet 1-48 (I want to monitor all ports on this switch as well)
    monitor session 1 source remote vlan 901
    monitor session 1 destination interface gigabitethernet 3 (There are 4 Gigabit Ethernet Uplink in CISCO 3750, I want all the traffic to go to port 3, is this the right way to do?)
    Thanks in advance.

  • UC520 CCA 3.1 Error: com.cisco.nm.lib.cmdsvc.cmdsvc

    I always get this error com.cisco.nm.lib.cmdsvc.cmdsvc when connecting to my uc520 and after this error nothing works right within CCA. I actually have to do a force close within task manager on the application to get it to exit out. I have done changes via ssh and I've heard that this can have an impact. how can I tell where in the config file the issues are and howto fix this?
    thanks

    Hi Jesse,
    Sorry for the late reply
    OK here is what I do, I always have a dedicated PC for running CCA (Yes sounds like an expensive way of doing it) but I normally use one of those <$200 laptops with a vanilla flavored Windows 7 install on it, I also turn everything off such as Firewall, UAC, AV etc..etc.. Then I install the latest version of Java and Flash onto it before installing CCA.
    This is then my dedicated CCA building system, the only time you panic is when there is a new version to install, occasionally the upgrade causes unusual issues and to-date still do not know why. But all-in-all a dedicated system removes all issues and all possibilities of issues to a greater degree.
    Following applications I run on this dedicated system to support the UC deployments:
    CCA  (Obviously)
    PSPad (Free text editing software and very valuable)
    Solarwinds or 3Cdaemon TFTP client
    Cisco Configuration Professional (Just incase you have to work on any ISR's or 800 series routers)
    Cute PDF if you want to turn Topology views into PDF for record keeping
    Putty or my preferrence SecureCRT for CLI work
    These are the basic essentials and a great place to start
    Cheers,
    David.
    Message was edited by: David Trad

  • Payables Open Interface Import getting errors out

    Hello All,
    I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
    (Insert ap inv dists 1a) Inside the insert function
    (Insert ap inv dists 1) Insert into ap_invoice_distributions
    (Insert ap inv dists 1) Insert into ap_invoice_distributions
    ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
    Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
    (Create Lines 22) Insert into ap_invoice_distributions
    create_non_item_lines<-Import_invoices<- Before report trigger
    Any one faced this kind of issue?
    any suggestions to resolve this.
    Thanks & Regards
    Aboothahir

    Pl post details of OS, database and EBS versions.
    Pl see these MOS Docs
    Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
    APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
    Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
    HTH
    Srini

  • Excel service and OWA - getting ERROR while trying to open/edit Excel documents

    Hi All,
    We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
    After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
    We are not able to view/edit the excel workbook from the browser (through OWA).
    To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
    Error details are given below:
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 3/25/2013 1:29:08 PM
    Event time (UTC): 3/25/2013 7:59:08 AM
    Event ID: fc2e0530f493493896e6c8b6297a0423
    Event sequence: 10
    Event occurrence: 3
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
        Trust level: Full
        Application Virtual Path: /x
        Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
        Machine name: VHYDMANTHSTP-02
    Process information:
        Process ID: 1252
        Process name: w3wp.exe
        Account name: NT AUTHORITY\NETWORK SERVICE
    Exception information:
        Exception type: ArgumentException
        Exception message: An entry with the same key already exists.
       at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
       at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
       at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Request information:
        Request URL:
    http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
        Request path: /x/_layouts/xlpreview.aspx
        User host address: 10.81.138.92
        User: 
        Is authenticated: False
        Authentication Type: 
        Thread account name: NT AUTHORITY\NETWORK SERVICE
    Thread information:
        Thread ID: 13
        Thread account name: NT AUTHORITY\NETWORK SERVICE
        Is impersonating: False
        Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
       at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
       at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
    One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
    is microsoft alive??
    Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Getting error while schedule a webi report

    Hi All,
    I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
    Could anyone help me regarding the error?
    Regards

    Hi Manoj,
    Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
    Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
    I think this should avoid partial results.
    Thanks,
    Neeraj

Maybe you are looking for