Getting error in LSMW

Hi ABAP Gurus,
I'm a MM guy.I'm getting error while doing LSMW.
The error is No target structures could be found with this message no
Message no. /SAPDMC/LSMW_OBJ_030001
Thanks & Regards
PKB

Hi
Check the Source structure and Structure Relationships , Then check whether the fields have been mapped properly . And make sure the target file fields sould compatible with the source structure fields.
Pavendhan . S
Edited by: Pavendhan Selvaraj on May 26, 2009 7:37 AM

Similar Messages

Error in LSMW getting return code 6

Hi all,
i Am getting a Error in LSMW getting return code 6 , after asign a file , in the read data step i am getting the error , please help me it is very urgent,
sridhar

Hi,
If the Sy-Subrc is 0 then Success, if the Sy-SUBRC is 4 then failure, if the Sy-SUBRC = 6 then the user might be not access to read the file
AUTHORITY-CHECK sets SY-SUBRC to 0 if the user has the necessary authorization, otherwise 4, 8, 12, 16, 24, 28, 32, or 36 depending on the cause
Regards
Sudheer

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Error in LSMW Specify Files option

Hi Gurus,
I am getting error while doing Specify Files option while using below mentioned object:
Object 0210 Storage bin (WM)
Method 0000
Program name RLPLAT00
Program type B Batch input
Error :
In Convert data option i am entering below details:
Logical Path /TMP
Logical File MM_WM_BIN_TAKEOVER
I am getting error :
Logical file 'MM_WM_BIN_TAKEOVER' is not assigned to physical file 'UPGRD_MTD_WM_TEST.lsmw.conv'
Cany anyone suggest what should i do to execute this?
Regards,
Arpit

Hi Guys,
I have solved my problem. Please refer below note for solution of this problem:
Note 753511 - Logical and physical path and file name in transaction LSMW
Our LSMW version was upgraded to 4.0 hence i was getting this error. I have provided Logical file name and Path accordingly to solve my problem
Arpit

Error in LSMW while specifying file for Material Cassification and Info Rec

Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
Amit

Hi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn

Getting error 51 saying 'IDoc included in IDoc packet containing an error'

When I am processing idoc in LSMW, getting error saying 'IDoc included in IDoc packet containing an error'.
Can any one tell me how to resolve this.

Hi,
Change the packet size to 1 then process again.

Getting error saying 'IDoc included in IDoc packet containing an error'.

hi experts
When I am processing idoc in LSMW, getting error saying 'IDoc included in IDoc packet containing an error'.I changed the packet size also but it was not resolved.
Can any one tell me how to resolve this.

Hi,
Check below link......
Getting error 51 saying 'IDoc included in IDoc packet containing an error'
even this link is not solving problem then check the aplication log to get exact error text.
Thanks,
Asit Purbey.

Routing upload error in LSMw

hi,
i am trying to upload data for routing( CA01) using direct input program RCPTRA02
I am getting error:
C\ 045
You cannot edit the task list object with activity type
i have serached forum but couldnt find satisfying solution.
if any body has any ideas, suggestions are welcome.

it appers this is not a lsmw problem, but it isnt really a data error.
with the same data i am able to crEATE A ROUTING MANUALLY OR BY RECORDING.
however i have a massive data to be laoded and wanted to get the perfromnace benefits from the Direcvt input.
i guess this is the proble with direct input program originally designed to create a routing.
input sturucters alsio dont have all the required fileds.
i am looking at oss notes.

Error with LSMW IDOC method while maintaining Quota arrangement

Hi
I am trying to create LSMW using IDOC method for maintaining quota Arrangment.
I used the standard Message type LPIEQU. Idoc is getting generated and when i tried to process this IDOC i am getting error "Function module not allowed: BAPI_IDOC_INPUT1".
I used the process code as "BAPI" in message type LPIEQU configuration in WE20.
If anyone faced this issue please let me know the reason for the error.
sakthi.K

see OSS Note 198252 - Special features of POI message category LOI*
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.

Error in LSMW for ME11

Hi,
I am getting error while creating LSMW for ME11, No QM info record exists for vendor xxxx.
How will I know for vendor QM info record to be maintained.
Smitha

this problem has actually nothing to do with LSMW, you get the same error without LSMW
In your material master QM view is a control key, and based on the cusotmizing of the control key it requires a Q-info record.

Error in LSMW of Characteristics

Dear Friends,
I am getting this error at the time of execution of lsmw.
Actually i have created LSMW of characteristics through Direct inpout method(program RCCTBI01)
It went well up to the "display converted data".
When i am creating batch input session it gives and process it then i am getting error
"Logical file name 'QM_CHAR_LSMW.CONV' is not permissible
Please help.
Thanks
Jigar

Hi Jeevan, mihailosundic,
Thanks for reply.
I have tried your suggestions in "specify files"
It is now giving error as below.
"Logical file name 'ZQM_CHAR_LSMW.CONV' is not permissible
Message no. SG809
Diagnosis
You are attempting to use the logical file name 'ZQM_CHAR_LSMW.CONV' in the current context. However, this logical file name is not permissible due to the system configuration.
System Response
Execution is not permissible with the logical file name 'ZQM_CHAR_LSMW.CONV'.
Procedure
Select one of the permissible logical file names or contact your system administrator to have the logical file name 'ZQM_CHAR_LSMW.CONV' permitted for this context.
Procedure for System Administration
The current application uses the logical file name 'CHARACTERISTIC' to check the permissible logical file names. The user is attempting to use the logical file name 'ZQM_CHAR_LSMW.CONV' (perhaps by selecting a previously-defined variant).
The user either needs to adjust his or her variant appropriately, or you can permit the logical file name 'ZQM_CHAR_LSMW.CONV' in this context.
More information about checking file names: SAP Note 1497003 (https://service.sap.com/sap/support/notes/1497003)."
Please reply

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

Trap errors in lsmw tool

hi all
how can we trap errors in lsmw tool?

hi,
u can get the log after u process the session
when u go to sm35 u will find the log there u will get the summery of the process in that if u choose only errors to display to then u will get only errors occured in it.
u can refer this thread also, it will give an idea also.
Re: errors record handling in LSMW
Rgds
Anver
<i>if hlped pls mark points</i>

Hi all How take care of errors in LSMW..

HI all,
Can you people help where we are correcting errors in LSMW . How we have handle errors in LSMw.
regards,
anilreddy.

Hi Anil,
Please chk this thread. You will get the answer.
ERROR HANDLING IN LSMW
<b>Reward Points if Useful</b>
Regards
Gokul

Editing is terminated message when running batch input error using lsmw

Any Idea why would I get the info message like
"Editing is terminated message when running batch input error using lsmw"
please suggest where to look at.
Thanks,
Edited by: mark_yellow mark on Jul 1, 2008 3:27 AM

Hi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik

Getting error in LSMW

Similar Messages

Maybe you are looking for