Getting Error in NVRAM

Hi,
I'm Getting Error in router from NVRAMwhile accessing below command in privilge 4 login
CTS-SEC-CBE#sh configuration
Using 14350 out of 262144 bytes
%Error opening nvram:/startup-config (Permission denied)
The error not observed while executing the command through privilege 15 login
Regards

Hi,
Please find the show version
Router#sh version
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 21:00 by prod_rel_team
ROM: System Bootstrap, Version 15.1(1r)T4, RELEASE SOFTWARE (fc1)
CTS-CBE-PRINEW uptime is 1 week, 1 day, 13 hours, 41 minutes
System returned to ROM by power-on
System restarted at 08:19:26 IST Sun Oct 7 2012
System image file is "flash0:c3900e-universalk9-mz.SPA.152-3.T.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE250/K9 with 740352K/308224K bytes of memory.
Processor board ID FGL1636129B
6 Gigabit Ethernet interfaces
DRAM configuration is 72 bits wide with parity enabled.
256K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        C3900-SPE250/K9       FOC16344GDA
Technology Package License Information for Module:'c3900e'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          datak9        Permanent      datak9
Configuration register is 0x2102

Similar Messages

3640 ERROR in NVRAM sizing. NVRAM could be bad!

Can this be fixed, I cant get out of rommon mode. I desperatly need this router for practice so if anyone can help I would appreciate it.
3600 Software (C3640-JS-M), Version 12.0(13), RELEASE SOFTWARE (fc1)
Compiled Tue 05-Sep-00 21:39 by linda
Image text-base: 0x60008918, data-base: 0x60C10000
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
=== Flushing messages () ===
Queued messages:
00:00:02: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:01: %C3600-3-BADNV: Detected invalid NVRAM size: -2056 bytes
No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
*** System received a Bus Error exception ***
signal= 0xa, code= 0x8, context= 0x61176310
PC = 0x602642f4, Cause = 0x20, Status Reg = 0x34018002
environment write to NVRAM failed
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
Warning: monitor nvram area is corrupt ... using default values
ÿ
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
C3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled

Hi
The following error message indicates the presence of a faulty NVRAM:
ERROR in NVRAM sizing. NVRAM could be bad!
Hence, this can be rectified by replacing the chassis.
Regards
Sush

%Error opening nvram:/startup-config (Permission denied)

I'm getting an odd error, permission denied trying to issue "show config" at user level. We use this throughout the environment with no issues.
IOS: System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T.bin"
R1#sh run | i aaa
aaa new-model
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting commands 15 default stop-only group tacacs+
aaa session-id common
R1#sh run | i priv
privilege exec level 1 traceroute
privilege exec level 1 ping
privilege exec level 1 show logging
privilege exec level 1 show configuration
privilege exec level 1 show privilege
privilege exec level 1 show
R1#disable
R1>show config
Using 11855 out of 262136 bytes
%Error opening nvram:/startup-config (Permission denied)

You are indeed allowed to run the command (as evidenced by the fact that the command did run).
show config is effectively an alias for the command more nvram:startup-config
As a result, the issue is the permission on the file, not the command itself.
Unfortunately, the file systems do not explicitly support permissions. This used to be implicitly supported through permissions on show config.
Perhaps this is a bug. I'd open a case on this if you need really need this feature.

Getting error while formating hdd

Hi all. am getting error:
"Disk erase failed with error:
POSIX reports: The operation couldn't be completed. Input/Output error"
while formating internal hdd with utility disk, i've tried use terminal as well to erase disk but no success
does any1 know how to solve that problem ? :> thanks

I/O error means it can't read or write to the drive.
I highly suspect it's a mechanical failure if Terminal doesn't work.
You selected the name of the hardware maker in Disk Utility right? Format HFS+ Journaled?
All I can say is try a Zero Erase reboot the comptuer after cleaning the disk and see if that works or try another boot disk.
Run the hardware test. try these hardware fixes, likely the drive will need to be replaced first, then if it occurs again it's the logicboard or power supply.
Reset SMC
http://support.apple.com/kb/ht3964
PRAM/NVRAM
http://support.apple.com/kb/HT1379
Hardware Test
http://support.apple.com/kb/HT1509
You can install OS X on to a blank external drive and hold option to boot from it and get by like that until you can get the internal drive replaced.
You can also burn a ISO of PartedMagic and option/c boot off of that and perform some miracles if it's a stubborn locked drive.

Payables Open Interface Import getting errors out

Hello All,
I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
(Insert ap inv dists 1a) Inside the insert function
(Insert ap inv dists 1) Insert into ap_invoice_distributions
(Insert ap inv dists 1) Insert into ap_invoice_distributions
ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
(Create Lines 22) Insert into ap_invoice_distributions
create_non_item_lines<-Import_invoices<- Before report trigger
Any one faced this kind of issue?
any suggestions to resolve this.
Thanks & Regards
Aboothahir

Pl post details of OS, database and EBS versions.
Pl see these MOS Docs
Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
HTH
Srini

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

Getting error while testing a outbound file in oracle B2B11g

Hi,
I am trying to configuare a outbound scenario in oracle B2B 11g.
I have created .ecs file and .xsd file and created a document type also and i am using generic file 1.0 as a lintening channel protocol and trying to read the input xml document from a perticular path.
I had setup partner and agreement also. everything is working fine and also file is succesfully polling from the source folder but i am getting error in B2B as :
B2B-50083
Error Description Machine Info: (infva0325) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
Can anyone guide me how to resolve this error?
I had tried everything but of no use.
Please do reply me with your suggestions.

Hi Anuj,
Please find below xml data which will be saved as .txt file for outbound processing. Let me know if there are any changes i have to do. Please let me know if you need any further information. Listening channel is reading the file but in agreement level it is failing.
<?xml version="1.0" encoding="UTF-8"?><Transaction-DESADV XDataVersion="1.0" Standard="EDIFACT" Version="D93A" CreatedBy="ECXEngine_837" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" CreatedDate="2011-12-14T12:59:40" GUID="{2d323135-3336-3630-3232-313938393033}" xmlns="urn:oracle:integration:b2b:099C29D4C4ED419194917C20ADF8ABC3">
<Internal-Properties>
<Data-Structure Name="Interchange">
<Property Name="InterchangeSenderID">senderID</Property>
<Property Name="InterchangeSenderQual">senderQuali</Property>
<Property Name="InterchangeReceiverID">RecieverID</Property>
<Property Name="InterchangeReceiverQual">RecieverQuali</Property>
<Property Name="RepeatingSeparator"/>
<Property Name="InterchangeApplicationRef">DESADV</Property>
<Data-Structure Name="Transaction">
<Property Name="TransactionID">DESADV</Property>
<Property Name="TransactionControllingAgency"/>
<Property Name="TransactionMessageVersionNumber">D</Property>
<Property Name="TransactionMessageReleaseNumber">93A</Property>
<Property Name="TransactionAssociationAssignedCode"/>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
<Segment-UNH>
<Element-0062>#ControlNumber#</Element-0062>
<Composite-S009>
<Element-0065>DESADV</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>93A</Element-0054>
<Element-0051>UN</Element-0051>
<Element-0057>EDIT30</Element-0057>
</Composite-S009>
</Segment-UNH>
<Segment-BGM>
<Composite-C002>
<Element-1001>351</Element-1001>
</Composite-C002>
<Element-1004>3364382</Element-1004>
</Segment-BGM>
<Segment-DTM>
<Composite-C507>
<Element-2005>137</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>SH</Element-3035>
<Composite-C082>
<Element-3039>7393142020009</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>CN</Element-3035>
<Composite-C082>
<Element-3039>7350056030012</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_10>
<Segment-CPS>
<Element-7164>1</Element-7164>
</Segment-CPS>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>1</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210587</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>2</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210510</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>3</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>081349</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>JF074</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20160905</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>4</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>051596</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>116812505</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20150131</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
</Loop-Group_10>
<Segment-CNT>
<Composite-C270>
<Element-6069>2</Element-6069>
<Element-6066>4</Element-6066>
</Composite-C270>
</Segment-CNT>
<Segment-UNT>
<Element-0074>#SegmentCount#</Element-0074>
<Element-0062>#ControlNumber#</Element-0062>
</Segment-UNT>
</Transaction-DESADV>

Getting Error while posting through KB11N : No true sender object entered

HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.

Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Automatic Po creation With MB01 i am getting Error

Hi ,
While doing goods receipt for Automatic Po creation i am getting error
MM activated Automatic Po
VM activated Automatic Po
101 Mov Type is also activated
Item 00010 of purchasing document 9999999999 does not exist
Message no. ME706
Diagnosis
Purchase order 00010 with item 9999999999 was not found.
Procedure
Enter a different purchase order.
i given the Vendor and quantity after entering error is coming
Please help
Manjunath

HI,
Pls ceck the points mentioned below.
Define one of the purchase organizations as Standard Purchase Organization
Assign your plant to Standard Purchase Organization
Maintain purchasing information record with price
Maintain the indicator for movement types 101 & 161
Define Default Values (MB01) for Document Type
Now you can enter a goods receipt without entering the purchase order number, a purchase order will be created automatically when you post the goods receipt. All such goods receipt will be valuated at the price maintained in the purchasing information record.
First you can try this with T. Code MB01 if it is working then try with T. Code MIGO, if you face any error or functionality is not working check with your basis consultant some authorization or some patches may be missing. Ask him to apply all relevant patches.
Thanks
Chandru

I keep getting error message when trying to sign in for iMessage with my Apple ID since upgrading to iOS 7

I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.

After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.

Getting Error in NVRAM

Similar Messages

Maybe you are looking for