Getting Error in OWB while generating

Hi Every one
I am getting the following error while trying to compile my mapping in OWB. Is there any experienced person who can guide me how to come out of this issue.
Thanks in advance
RB
Cannot invoke method handleSelectionChanged in class oracle.wh.ui.tsmapping.GenerateEventHandler

I'm getting a very similar error when attempting to delete an object from my mapping in OWB 10.2.0.3:
Cannot invoke method handleObjectBeforeDeleted in class oracle.wh.ui.tsmapping.MappingGraph
I'm assuming this is some type of error with the OWB java client itself, but I'm with the OP in hoping someone out there has any idea where to start looking for answers regarding these types of errors. Thanks.

Similar Messages

SQL Expressions in RAD -Getting error during runtime while generating rpt

Hi
We have just migrated from WSAD to RAD Version: 7.0.0.7.
The issue is: I am getting the error at the runtime when I am trying to use the SQL expression in my one of the report. The SQL Expression feature is not supported by this version of RAD. I checked the Help contents. It says
Field Objects: SQL expression fields
This report contains SQL Expression fields. These fields are not visible in this version of the Crystal Reports designer, but they will be evaluated by the system when the report is executed. New SQL Expression fields cannot be created by the designer. SQL Expression fields will remain in the .rpt file after saving and can be edited by other Crystal Reports designers
To me it seems you can use the 'SQL Expressions' in the report using some Crystal Reports designers and at the runtime it will be evaluated. So I edited my report with some Crystal Reports Designer and tested it on WSAD. It worked fine. Now since we have migrated to RAD, this is an issue since I am getting the following error:
ERROR [WebContainer : 0] com.crystaldecisions.reports.formatter.formatter.objectformatter - com.crystaldecisions.reports.dataengine.be: Failed to parse expression.
[12/17/08 15:12:14:750 EST] 0000001c SystemOut     O 15:12:14,671 ERROR [WebContainer : 0] com.businessobjects.reports.sdk.JRCCommunicationAdapter - Failed to export report
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Failed to parse expression.
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
When I remove the expression fields, it works fine on RAD too.
I am using following versions:
RAD Version: 7.0.0.7
Crystal Reports for Rational Application Developer Version: 11.5.6.v20080304.
Crystal Report Runtime Support version is 11.8.4.v1094
Please let me know if somebody has faced the similar issue.
Any help/suggestions would be appreciated.
Thanks,
Kamal

Hi
We have just migrated from WSAD to RAD Version: 7.0.0.7.
The issue is: I am getting the error at the runtime when I am trying to use the SQL expression in my one of the report. The SQL Expression feature is not supported by this version of RAD. I checked the Help contents. It says
Field Objects: SQL expression fields
This report contains SQL Expression fields. These fields are not visible in this version of the Crystal Reports designer, but they will be evaluated by the system when the report is executed. New SQL Expression fields cannot be created by the designer. SQL Expression fields will remain in the .rpt file after saving and can be edited by other Crystal Reports designers
To me it seems you can use the 'SQL Expressions' in the report using some Crystal Reports designers and at the runtime it will be evaluated. So I edited my report with some Crystal Reports Designer and tested it on WSAD. It worked fine. Now since we have migrated to RAD, this is an issue since I am getting the following error:
ERROR [WebContainer : 0] com.crystaldecisions.reports.formatter.formatter.objectformatter - com.crystaldecisions.reports.dataengine.be: Failed to parse expression.
[12/17/08 15:12:14:750 EST] 0000001c SystemOut     O 15:12:14,671 ERROR [WebContainer : 0] com.businessobjects.reports.sdk.JRCCommunicationAdapter - Failed to export report
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Failed to parse expression.
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
When I remove the expression fields, it works fine on RAD too.
I am using following versions:
RAD Version: 7.0.0.7
Crystal Reports for Rational Application Developer Version: 11.5.6.v20080304.
Crystal Report Runtime Support version is 11.8.4.v1094
Please let me know if somebody has faced the similar issue.
Any help/suggestions would be appreciated.
Thanks,
Kamal

1809: An error has occured while generating a seccion key for encryption

Hi
I am trying to perform a remote control operation using Console One
1.3.6c, but evry thime getting the following error message
"1809: An error has occured while generating a seccion key for
encryption." I had looked for it in Novell site & found that the fix is
to upgrade to ZDF 6.5 SP1, but I am looking for a diffrent work around
for it. Please let me know is there any work around for this problem.
Regard
Kallol
kallol

kallol,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

TS1424 I get error code 1009 while trying to download an application from app stor

I get error code 1009 while trying to download an application from app storp

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

I am getting Error code : 50 while installing update on CC

I am getting Error code : 50 while installing update on CC@

Please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.
Regards
Rajshree

Getting Error Code U44M1P7 while upgrading, how do I correct?

Getting Error Code U44M1P7 while upgrading, how do I correct?

Which product's update you are trying to install?
Is it from Creative Cloud or perpetual?
Please check following if you are having Creative Cloud.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Getting error code 0xC0000005 while installing windows 8.1 x64

Please help me..
I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64
When the installation process arrives at 87% every time I get the error code saying that installation can not be done.
I can not install windows 8.1 x64 version on my laptop.
please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.
I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....
how to overcome it...please...
This question was solved.
View Solution.

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Error in mapping while generating bitstream

While generating bitstream in xps-14.2 i am getting error related to mapping:
ERROR:MapLib:978 - LUT6 symbol
"RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/UARTLITE_RX_I/running_valid_start_ AND_8_o_SW0" (output signal=RS232_Uart_1/N6) has an equation that uses input
pin I2, which no longer has a connected signal. Please ensure that all the
pins used in the equation for this LUT have signals that are not trimmed (see
Section 5 of the Map Report File for details on which signals were trimmed).
ERROR:MapLib:978 - LUT6 symbol
"RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/UARTLITE_RX_I/running_valid_start_ AND_8_o_SW0" (output signal=RS232_Uart_1/N6) has an equation that uses input
pin I4, which no longer has a connected signal. Please ensure that all the
pins used in the equation for this LUT have signals that are not trimmed (see
Section 5 of the Map Report File for details on which signals were trimmed).
ERROR:MapLib:978 - LUT4 symbol
"RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/UARTLITE_RX_I/stop_Bit_Position_EN _16x_Baud_AND_16_o1" (output
signal=RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/UARTLITE_RX_I/stop_Bit_Posit
ion_EN_16x_Baud_AND_16_o) has an equation that uses input pin I0, which no
longer has a connected signal. Please ensure that all the pins used in the
equation for this LUT have signals that are not trimmed (see Section 5 of the
Map Report File for details on which signals were trimmed).
ERROR:MapLib:978 - LUT6 symbol
"RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/status_reg_1_glue_set" (output
signal=RS232_Uart_1/RS232_Uart_1/UARTLITE_CORE_I/status_reg_1_glue_set) has
an equation that uses input pin I2, which no longer has a connected signal.
Please ensure that all the pins used in the equation for this LUT have
signals that are not trimmed (see Section 5 of the Map Report File for
details on which signals were trimmed).
I go through the forum for this error ,i found some answers but still not able to resolve my error.
Thank you.

Yes that error is resolved,Thank you very much .
mapping error related to uart signal is resolved but some mapping errors are remaining:
ERROR:MapLib:979 - LUT2 symbol
"proc_sys_reset_0/proc_sys_reset_0/EXT_LPF/External_System_Reset_MB_Debug_Sys _Rst_OR_8_o1" (output
signal=proc_sys_reset_0/proc_sys_reset_0/EXT_LPF/External_System_Reset_MB_Deb
ug_Sys_Rst_OR_8_o) has input signal "RESET" which will be trimmed. See
Section 5 of the Map Report File for details about why the input signal will
become undriven.
ERROR:MapLib:978 - LUT2 symbol
"proc_sys_reset_0/proc_sys_reset_0/EXT_LPF/External_System_Reset_MB_Debug_Sys _Rst_OR_8_o1" (output
signal=proc_sys_reset_0/proc_sys_reset_0/EXT_LPF/External_System_Reset_MB_Deb
ug_Sys_Rst_OR_8_o) has an equation that uses input pin I0, which no longer
has a connected signal. Please ensure that all the pins used in the equation
for this LUT have signals that are not trimmed (see Section 5 of the Map
Report File for details on which signals were trimmed).
Now in ucf file, for which signal i have to apply the "s" property.

Getting error in portal while accessing dms repostitory

Hi Experts,
Iam getting the below error in portal while accessing the dms repository. the repository was fine status is in green color
but still getting the error while iam viewing it from content administration > kmcontent> my repository name
what should i do please help me in this
com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.openConnection(DMSRMR3FunctionCalls.java:5934)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.getTopLevelFolders(DMSRMR3FunctionCalls.java:426)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.refreshChildren(DMSRMStructure.java:531)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.getChildren(DMSRMStructure.java:574)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableNamespaceManager.findResources(DMSRMMutableNamespaceManager.java:930)
at com.sapportals.wcm.repository.CollectionImpl2.internalGetChildrenManager(CollectionImpl2.java:310)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:1616)
at com.sapportals.wcm.repository.CollectionImpl.doGetChildren(CollectionImpl.java:145)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:125)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:358)
at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
at com.s...
Please help me in this .............
waiting for your responses.....
Thanks & Regards,
Shilpa.

Hi,
Thanks for your imediate response. we deplyed the DMS connectors in portal we got standard role document explorer
and i changed the parameters in the dmsrm repository but still facing the same error.
please help me in this
waiting for your response
Regards,
Shilpa.

Getting error Adobe forms "while trying to check the layout in SFP "

Hi all,
I am getting error while trying to check the layout in Transaction SFP . I have mentioned the error details below.
Error signature:
AppName:formde~1.exe           Appver: 7.1.4270.1 ModName:mfc71u.dll
Modver:7.10.3077.0                  Offset:0002dc12
Exception Information:
Code:0xc0000005                   Flags:0x00000000
Record:0x0000000000000000 Address:0x000000005f4ddc12
Please help in fixing this issue
Thanks
Rajagopal.S

Dear All,
   The problem was with the ADS configuration. I have resolved.
Thanks
Raj

Getting error ORA-12705, while connecting through Sql*Plus?

Hi TOM,
While connecting ORACLE Database through Sql*Plus / via through Application. We getting error called "Error while trying to retrieve text for error ORA-12705".
How to re-solve this one?
Thanks & Regards,
Senthil K Kumar.

Maran,
check the registry NLS_LANG in the registry rename it as suggested by burleson and add a new entryCurrently, it was more suggested by Maxim ;-)
Nicolas.

Getting ERROR in SDM while deploying

Hi All,
I have downloaded CRM Business Package for 4.0 file
BPCRM40602_3-10002661.ZIP from SDN.
I am trying to delpoy this using SDM.
I rename the file to BPCRM40602_3-10002661.sca and deployed but i am getting ERROR saying Manifest attributes are missing or badly formatted value...
Can you tell the reason for this.
and Can i get .SCA file or .EPA file for CRM BP for 4.0 in SDN or Service Marlet Place?
Points will be given ....
Thanks
Sandeep

Indeed that ZIP file is not going to work. It does not contain a Manifest.mf for a start. Manifest file will contain the version of the business package, the vendor and plenty of other information.
Possibly you cant use the SDM to deploy this business package. How about uploading it directly through the portal?

Getting error in PSA while trying to load data in cube

Dear Friends,
I am trying to load data in cube I am getting error in PISA i.e.
Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .
please guide me.
Thanks in Advance.
Best Regards
Rafeeq

<i>Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .</i>
Your data is in lowercase.. either change the data to UPPERCASE from source..
or delete the request in cube and edit PSA data from lowecase to UPPER CASE if they are few records only.
or make the infoobject setting lowecase checked,
Regards
Manga(Assign points if it helps!!)

Getting Error in Portal while booking Time Sheet......

Hi All,
I am Getting Error in Portal when Booking Time sheet in Record working time Link. Getting below Error.
"Enter activity type only in conjunction with cost center"...I have entered data in KP26.
But for the same employee if i am booking the Efforts through R/3 (CAT2 Transaction) not getting the error. Successfully able to release the efforts it is storing in CATSDB.
PLease advice on this.
Regards,
Srinivas...

Hi Srinivas,
Please make sure that CATS data entry fields are marked as "input only".
Regards,
Dilek

TS3694 What does it mean when I get error message 3194 while trying to restore my ipad?

What does it mean if I receive an error message 3194 while trying to restore my ipad?
I received this message after connecting my ipad to itunes. There is a display of a cord connecting to itunes which is initially why I was alerted to connect my ipad to my itunes account on my laptop.
Any help is appreciated.

Turn of any firewall or antivirus software.

Getting Error in OWB while generating

Similar Messages

Maybe you are looking for