Getting "Error in setting DHCP Scope Network and Netmask"
Hello Cisco Experts - I'm trying to setup a new DHCP scope on my Cisco 2504 and am getting the error referenced above. Here are the settings I am using:
I have another range setup in exactly the same way only it runs from 10.35.209.65 through 10.35.209.90. Can anyone point me in the right direction for what I'm doing wrong? Thanks in advance!
Good question.
Here is the screeshot of the scope I just activated:
What IOS Version are you running? I have 7.4.100.0 on mine.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
Similar Messages
-
Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network
A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck! -
I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me
please replyyy i'm stuck on this like whole week
-
having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas
Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra -
Why do I get error 150:30 when I try and send a photo to Elements 8?
Why do I get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?
My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
Turn off your phone and then turn it back on.
Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
John -
I have photoshop elements 13 and want to remove photoshop elements 10 first. When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7
Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs -
I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone. I would perfer using outlook but will settle for the Imac calendar
It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
Getting error while setting up Apps Server VM
Hi All,
I'm getting couple of errors while setting up the apps VM. I was following the instructions at the link given below, but Im not getting any support from there so thought of posting here...
http://only4left.jpiwowar.com/2012/12/1hr-ebs-sandbox/
I'm getting the error while running the command...
/etc/init.d/oraclevm-template start
I'm posting content of log file here.... I'm posting the entire file as Im really clueless where the error is caused. Please help me get through this error.
Started ApplyAppsTier at Wed Dec 25 09:56:26 EST 2013
Version:
ApplyAppsTier.java : 120.4
# Calling ApplyAppsTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_weboh_oh...
Registering using Registration Driver
/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/driver/regclone.drv
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adouiweboh.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli3.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adlnkweboh.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnkweboh1.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/txkstubcfg1013.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10131.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/apachectl_sh_1013_oh.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl to /u01/E-BIZ/inst/apps/VIS_jags/out/apachectl1
setting permissions: 700
setting ownership: oracle:oinstall
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_weboh_ohWed Dec 25 09:56:30 2013
/u01/E-BIZ/apps/tech_st/10.1.3/jdk/bin/java -classpath /u01/E-BIZ/apps/apps_st/comn/clone/jlib/java:/u01/E-BIZ/apps/tech_st/10.1.3/oui/jlib/OraInstaller.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml -nolink -oaVar s_weboh_oh -homestub weboh -log /u01/E-BIZ/inst/apps/VIS_jags/admin/log/ohclone.log
NON-COMPLIANT: /u01/E-BIZ/apps/tech_st/10.1.3/oraInst.loc does not point to an inventory inside the current ORACLE_HOME
Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
Please make the necessary changes to the following file:
/u01/E-BIZ/apps/tech_st/10.1.3/oraInst.loc
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/E-BIZ/apps/tech_st/10.1.3/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/E-BIZ/inst/apps/VIS_jags/admin/oraInst.loc session:ORACLE_HOME=/u01/E-BIZ/apps/tech_st/10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_WEBOH__u01_E_BIZ_apps_tech_st_10_1_3 oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_WEBOH__u01_E_BIZ_apps_tech_st_10_1_3 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_weboh_oh with return code: 0Wed Dec 25 09:57:24 2013
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
script returned:
adlnkweboh.sh started at Wed Dec 25 09:57:24 EST 2013
Log file located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.3/install/make_12250957.log
adlnkweboh.sh completed sucessfully
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adouiweboh.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli4.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adlnkweboh.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnkweboh2.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/txkstubcfg1013.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10132.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/apachectl_sh_1013_oh.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl to /u01/E-BIZ/inst/apps/VIS_jags/out/apachectl2
setting permissions: 700
setting ownership: oracle:oinstall
Completed home registration for s_weboh_oh
Executing home registration for s_tools_oh...
Registering using Registration Driver
/u01/E-BIZ/apps/tech_st/10.1.2/appsutil/driver/regclone.drv
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adouitools.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli5.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adlnktools.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnktools1.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/txkstubcfg1012.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10121.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/ftrace_cfg_1012.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg
backup : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg to /u01/E-BIZ/inst/apps/VIS_jags/out/ftrace1.cfg
setting permissions: 700
setting ownership: oracle:oinstall
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_tools_ohWed Dec 25 09:57:50 2013
/u01/E-BIZ/apps/tech_st/10.1.3/jdk/bin/java -classpath /u01/E-BIZ/apps/apps_st/comn/clone/jlib/java:/u01/E-BIZ/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml -nolink -oaVar s_tools_oh -homestub tools -log /u01/E-BIZ/inst/apps/VIS_jags/admin/log/ohclone.log
NON-COMPLIANT: /u01/E-BIZ/apps/tech_st/10.1.2/oraInst.loc does not point to an inventory inside the current ORACLE_HOME
Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
Please make the necessary changes to the following file:
/u01/E-BIZ/apps/tech_st/10.1.2/oraInst.loc
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/E-BIZ/apps/tech_st/10.1.2/oui/bin/runInstaller -debug -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/E-BIZ/inst/apps/VIS_jags/admin/oraInst.loc session:ORACLE_HOME=/u01/E-BIZ/apps/tech_st/10.1.2 oracle.as.j2ee.top:s_asInstanceName=VIS_TOOLS__u01_E_BIZ_apps_tech_st_10_1_2 oracle.as.j2ee.top:s_adminName=ias_admin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_TOOLS__u01_E_BIZ_apps_tech_st_10_1_2 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_tools_oh with return code: 0Wed Dec 25 09:58:24 2013
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
script returned:
adlnktools.sh started at Wed Dec 25 09:58:24 EST 2013
Log file located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.2/install/make_12250958.log
Error while running adlnktools.sh.
return code = .46
Please check logfile located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.2/install/make_12250958.log
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adouitools.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli6.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adlnktools.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnktools2.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/txkstubcfg1012.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10122.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/ftrace_cfg_1012.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg
backup : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg to /u01/E-BIZ/inst/apps/VIS_jags/out/ftrace2.cfg
setting permissions: 700
setting ownership: oracle:oinstall
Completed home registration for s_tools_oh
Completed home registration.
Skipping AutoConfig execution. AutoConfig will be run as a part of ApplyAppltop
ApplyApplTechStack Completed Successfully.
# Calling ApplyApplTop...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Skipping prodsetup driver processing; driver file not found at: /u01/E-BIZ/apps/apps_st/comn/clone//apps/driver/jags_prodsetup.drv
Executing runAutoConfig...
Deleting files of type INSTALL
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/icx/12.0.0/admin/driver/icxtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/msc/12.0.0/admin/driver/msctmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/scripts/msc/mscmatlab.sh
File exists
File deleted
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ieo/12.0.0/admin/driver/ieotmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/bis/12.0.0/admin/driver/bistmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ams/12.0.0/admin/driver/amstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cct/12.0.0/admin/driver/ccttmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/wsh/12.0.0/admin/driver/wshtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cln/12.0.0/admin/driver/clntmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/oke/12.0.0/admin/driver/oketmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/okl/12.0.0/admin/driver/okltmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/oks/12.0.0/admin/driver/okstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csf/12.0.0/admin/driver/csftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/igs/12.0.0/admin/driver/igstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/admin/driver/ibytmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/jtf/12.0.0/admin/driver/jtftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/mwa/12.0.0/admin/driver/mwatmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cn/12.0.0/admin/driver/cntmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csi/12.0.0/admin/driver/csitmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/wip/12.0.0/admin/driver/wiptmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/fnd/12.0.0/admin/driver/fndtmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/url_fw_ws.conf
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/custom.conf
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/j2ee/oafm/config/mapViewerConfig.xml
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.2/network/admin/tnsnames.ora
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/network/admin/tnsnames.ora
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sql
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sh
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkWfClone.sh
File exists
File deleted
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cse/12.0.0/admin/driver/csetmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/eam/12.0.0/admin/driver/eamtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/fte/12.0.0/admin/driver/ftetmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/driver/adtmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkConfigAppsOcm.pl
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/url_fw_ws.conf
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/custom.conf
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/j2ee/oafm/config/mapViewerConfig.xml
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.2/network/admin/tnsnames.ora
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/network/admin/tnsnames.ora
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sql
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sh
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkWfClone.sh
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ont/12.0.0/admin/driver/onttmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ar/12.0.0/admin/driver/artmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ahl/12.0.0/admin/driver/ahltmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ozf/12.0.0/admin/driver/ozftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ies/12.0.0/admin/driver/iestmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csd/12.0.0/admin/driver/csdtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/igc/12.0.0/admin/driver/igctmpl.drv
Starting CVM.....
Using Context file : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u01/E-BIZ/inst/apps/VIS_jags/admin/out/12250959/VIS_jags.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/custom/adxmlctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Wed Dec 25 09:59:56 EST 2013
found context version : 120.271.12010000.36
available update version : 120.271.12010000.36
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Wed Dec 25 09:59:56 EST 2013
===========================================================================
Updating local context file variables for Middle Tier
Checking file /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adgendbc_ux.sh
FND_SECURE: /u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure
DBC FILE NAME: VIS
File exists, getting the version
Version: 120.8.12010000.6
No updates to s_fnd_secure needed
Writing Context File back to File System
Context file updated
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : jagdish
sDbDomain : oracle.com
sDbPort : 1563
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@jagdish.oracle.com:1563:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS.oracle.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS.oracle.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Exception occurred while preseeding variables in the context file: java.sql.SQLException: Could not get connection to the database
StackTrace:
java.sql.SQLException: Could not get connection to the database
at oracle.apps.ad.tools.configuration.CVMHelper.processNewContextFile(CVMHelper.java:875)
at oracle.apps.ad.context.CtxValueMgt.preSeed2Ctx(CtxValueMgt.java:1825)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1620)
at oracle.apps.ad.clone.ApplyApplTop.runCVM(ApplyApplTop.java:510)
at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:552)
at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:619)
===========================================================================
Starting synchronization of product tops at Wed Dec 25 09:59:56 EST 2013
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Topfile : /u01/E-BIZ/apps/apps_st/appl/admin/topfile.txt
Verifying system requirements:
ContextFile : VALID
TopFile : VALID
Updating the Contextfile:
[ s_blctop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/blc/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/blc/12.0.0
[ s_ipdtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ipd/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ipd/12.0.0
[ s_rhxtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rhx/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rhx/12.0.0
[ s_ozstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ozs/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ozs/12.0.0
[ s_ozptop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ozp/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ozp/12.0.0
[ s_zsatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/zsa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/zsa/12.0.0
[ s_jtstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/jts/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/jts/12.0.0
[ s_ibatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/iba/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/iba/12.0.0
[ s_zfatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/zfa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/zfa/12.0.0
[ s_abmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/abm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/abm/12.0.0
[ s_imttop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/imt/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/imt/12.0.0
[ s_eaatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/eaa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/eaa/12.0.0
[ s_vehtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/veh/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/veh/12.0.0
[ s_amftop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/amf/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/amf/12.0.0
[ s_okrtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/okr/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/okr/12.0.0
[ s_okotop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/oko/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/oko/12.0.0
[ s_okbtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/okb/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/okb/12.0.0
[ s_rcmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rcm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rcm/12.0.0
[ s_xnstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xns/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xns/12.0.0
[ s_fpttop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/fpt/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/fpt/12.0.0
[ s_xnmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xnm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xnm/12.0.0
[ s_xnitop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xni/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xni/12.0.0
[ s_xnctop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xnc/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xnc/12.0.0
[ s_evmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/evm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/evm/12.0.0
[ s_cuntop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/cun/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/cun/12.0.0
[ s_cuetop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/cue/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/cue/12.0.0
[ s_ahmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ahm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ahm/12.0.0
[ s_metop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/me/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/me/12.0.0
[ s_rlatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rla/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rla/12.0.0
[ s_csstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/css/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/css/12.0.0
Synchronization of product tops successful
===========================================================================
===========================================================================
Starting synchronization of product tops at Wed Dec 25 09:59:57 EST 2013
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Topfile : /u01/E-BIZ/apps/apps_st/appl/admin/topfile.txt
Verifying system requirements:
ContextFile : VALID
TopFile : VALID
No updates to Contextfile for Product Tops needed
Synchronization of product tops successful
===========================================================================
===========================================================================
Starting location of IANA character set
[s_iana_cset]
IANA Charset obtained from Database : null
IANA Charset present in Context file : UTF-8
IANA Charset based on APPL_TOP char set: UTF-8
IANA Charset decided for Context file : UTF-8
Action taken : None, since the correct value exists in the Context file
===========================================================================
===========================================================================
Starting Context Value Management System at Wed Dec 25 09:59:57 EST 2013
Using version 120.13.12010000.3
Options:
Force : no
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Templatefile : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
ValueUpdateFile : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adcvmat.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
[ s_javamailer_imap_user ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapUser
INFO : Customer has already set a value - skipping
[ s_javamailer_reply_to ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoReplyTo
INFO : Customer has already set a value - skipping
[ s_javamailer_imaphost ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapHost
INFO : Customer has already set a value - skipping
[ s_javamailer_imapdomainname ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapDomain
INFO : Customer has already set a value - skipping
[ s_ohs_serveradmin ]
Action : askUser
Change reason : This value will be used for OHS Administator email address.
Expected value : changeOnOHSInstall
Found value : [email protected]
INFO : Customer has already set a value - skipping
[ s_perl5lib ]
Action : translate
Change reason : Removal of hard-coded value in the templates.
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl:/u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi
New value : /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl:/u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_tools_oranls ]
Action : translate
Change reason : ORA_NLS10 needs to point to the correct location.
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.2/ocommon/nls/admin/data]
Found value : /u01/E-BIZ/apps/tech_st/10.1.2/nls/data/9idata
New value : /u01/E-BIZ/apps/tech_st/10.1.2/nls/data/9idata
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_cmanport ]
Action : translate
Change reason : Removing hardcoded value of s_cmanport to use s_dbport instead
Expected value : [1521]
Found value : 1563
New value : 1563
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_tools_ldlib ]
Action : translate
Change reason : To support the third-party libraries in $SHT_TOP/lib
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads]
Found value : /u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
New value : /u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_oacore_ld_lib_path ]
Action : translate
Change reason : To support the usage of third-party libraries in $SHT_TOP/lib by the Java Concurrent Programs
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
New value : /u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jto_debug_string ]
Action : translate
Change reason : To reduce the default level of logging for the Fulfillment Server
Expected value : [full]
Found value : off
New value : off
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jto_log_level ]
Action : translate
Change reason : To reduce the default level of logging for the Fulfillment Server
Expected value : [9]
Found value : 1
New value : 1
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=full -Dengine.LogLevel=9 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=full -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.Please paste the log file of
/u01/E-BIZ/inst/apps/VIS_jags/admin/log/ApplyAppsTier_12250956.log
Also check
Troubleshooting RapidClone issues with Oracle Applications R12 (Doc ID 603104.1) -
Getting Error in setting configuration of iPod using OS X Server Profile Manager
We are getting error when we are trying to configure the iPods using Profile Manager. Please let me know what is causing for this kind of error. Please see in attachment.
We have device groups, once the device have been enrolled we then move to a pre-configured profile which sets up items such as wifi, e-mail and passcpde etc all in one go, this has had mixed results, I've now setup profile groups for each item to give us more control over only given the user what they need instead on forcing everything, this resolved my item above but more testing is needed, the main issue has been trying to pass a pre-owned device to a new user as it seems to remember the pervious user in some cases, this is why I asked about if it was possible to delete device history.
-
hi dude!
I'm using flex4 and i tried to set halo theme by selecting projetc-properties-flex compiler->in text field i added "
-theme=${flexlib}/themes/Halo/halo.swc
"........... but i'm getting error as "cannot resolve mx controls".............. do there s anyother procedure that i wan to fallow?Are you trying to set the properties from Flash Builder? If so there is a properties pages in the project for selecting a theme.
-Darrell -
Trying to set up contacts on Windows7 PC. Get error message that "setup cannot start because iCloud server has stopped responding. How can I fix this?
Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo -
Why do I keep getting ERROR 404 with regards to iCal and Gmail?
I have a desktop iMac with these specs:
Processor 3.06 GHz Intel Core i3
Memory 4 GB 1333 MHz DDR3
Software OS X 10.9.4 (13E28)
iCal Version 7.0 (1841.1)
iCal cannot refresh and I keep the message:
The URL https://www.google.com/calendar/dav/[email protected]/user///www.google.com/calendar/dav/[email protected]/user/ encountered HTTP error 404. Make sure the URL is correct.
This happened after I tried to import a calendar from Gmail into iCal. What should I do? And how can I get iCal to successfully retrieve new Calendar items from Gmail automatically?
Coeli IngoldNMAYO,
In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
Reformatting a CompactRIO Real-Time Embedded Controller
Ben Sisney
FlexRIO V&V Engineer
National Instruments -
I keep getting error "Unable to join the network" when trying to connect to wifi
Help! I have tried to connect to multiple networks and keep getting the same error message. I have reset my network settings and wiped the ipod clean restored. Any ideas?
No.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
DHCP scope increase and changes in wlc
hi,
i am using wlc 4402 with a mgt ip 172.26.150.x/24 and ap manager ip 172.26.150.x/24, my all ap get the ip address from dhcp . currently in dhcp server 172.26.150.3 to 254 dhcp scope is configured. at mysite some devices are configured like ipad,iphone or galaxy tab with mac binding in dhcp server. now this pool is almost full. i have a policy configured for these devices for mac binding is done in DHCP. to increase pool what are the changes i need to do in wlc. what are the changes i need to do in dhcp server . is policy made for mac binding in dhcp server will get affected by this ?
regards
rajatHi Rajat,
Use a /23 range ip address rather than using 172.26.150.x/24. So at first this change need to be carried out on the L3 device (which will the default gateway of the WLC managment interface). Accordingly the AP managment ip and ap manager ip's subnet mask is going to change from /24 to /23.
Then ensure that on the dhcp server you expand the scope from /24 to /23. This is will not affect the MAC bindings as long as you are using the same ip range with a different subnet mask.
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!! -
Getting error while setting SFTP adapter properties dynamically in Biztalk 2013
Hi ,
I am getting error while doing setup SFTP adapter in biztalk 2013.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Create SFTP facade error.
Server stack trace:
at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker..ctor(String host, Int32 port, String username, String password, String key, String privateKeyPassword, Boolean acceptAnyserverKey, String expectedServerFingerPrint, String proxyhost, Int32 proxyport,
String proxyuserName, String proxypassword, Int32 proxytype, Int32 encryptionType, Boolean isKeyData)
at Microsoft.BizTalk.Adapter.Sftp.SftpConnection.OpenUnderlyingConnection(SftpConnectionProperties connectionProperties)
at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.ConnectionPool`3.GetConnection(T1 connectionProperties, TimeSpan timeout)
at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.GetConnection(T connectionProperties, TimeSpan timeout)
at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {1059433E-B2D4-4394-8277-C31BDFC00553}
InstanceID: {BED31F04-E764-446D-A587-65B1F72F7A98}Hi Abhay,
Can you pls explain what are you trying to achieve here? Little bit about your solution/requirement and the way you implementing things?
As you have mentioned that you are setting the SFTP adapter properties dynamically within your orchestration, can you share the code where you are assigning the properties and constructing the message?
Rachit
Maybe you are looking for
-
BUG REPORT - Catch Up, ITV player
I'm sure there must be some way to report bugs officially - but I don't know what it is. On a couple of occasions now, I have noticed that the most recent episode of Coronation Street (e.g. 7.30pm, Weds 26th Sept 2012) does not appear in the Catch Up
-
Fbl1n txn for updating vendor line item
hello every one iam trying to update vendor line item when a billing document get cancelled in vf11 i have tried bapi BAPI_ACC_DOCUMENT_REV_POST . the requirement is whenever a billing document get cancelled the commision need to get credited again
-
How to sort documents on a single page?
I'm trying to create a page within my website that has documents that can be sorted/filtered so tht only certain documents display according to the sort term. Honestly, I feel I must be missing something obvious but I can't seem to find anything via
-
How to get the transaction name from the Webdynpro portal in SRM 7.0
Hello Experts, Would you please let me know the procedure to get the current transaction name from the SRM 7.0 portal. Is there any similar procedure like in ITS to get the transaction Name/Template Name in "View Source" of the portal. Our primary re
-
Hi I unistalled my creative cloud and installed adobe cs5 tools (including photoshop and all) then i uninstalled that and again installed "creative cloud" but from that moment i am getting this message above photoshop app "up to date" .Please check t