Getting Error in starting VIP in 3 NODE RAC Cluster in VMWARE

hi
please can some one help me to have solution for why VIPCA is failing to start VIP on RAC Node 3 it gives the ERROR: CRS-1006; CRS-0215 no more members. Network Configuration is like:
/etc/hosts
127.0.0.1 localhost.localdomain localhost
#Public IP
192.168.2.131 rac1.sun.com rac1
192.168.2.132 rac2.sun.com rac2
192.168.2.133 rac3.sun.com rac3
#Private IP
10.10.10.31 rac1-priv rac1-priv
10.10.10.32 rac2-priv rac2-priv
10.10.10.33 rac3-priv rac3-priv
#Virtual IP
192.168.2.131 rac1-vip.sun.com rac1-vip
192.168.2.132 rac2-vip.sun.com rac2-vip
192.168.2.133 rac3-vip.sun.com rac3-vip
/etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rac1.sun.com
GATEWAY=192.168.2.1
Thanks in Advance

you should have to user some other new ips for VIP.
PLEASE CHANGE THE VIP IP's and try again.
192.168.2.131 rac1-vip.sun.com rac1-vip
192.168.2.132 rac2-vip.sun.com rac2-vip
192.168.2.133 rac3-vip.sun.com rac3-vipchange the ips to some other ip not used by any machines.
sample /etc/hosts file
127.0.0.1 localhost.localdomain localhost
# Public
10.1.10.201 rac1.localdomain rac1
10.1.10.202 rac2.localdomain rac2
#Private
10.1.9.201 rac1-priv.localdomain rac1-priv
10.1.9.202 rac2-priv.localdomain rac2-priv
#Virtual
*10.1.10.203 rac1-vip.localdomain rac1-vip*
*10.1.10.204 rac2-vip.localdomain rac2-vip*

Similar Messages

Getting error while starting managed recovery

Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION

Hi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks

Getting Error while starting JDeveloper - "An unexpected severe error"

Getting Error while starting JDeveloper - "An unexpected severe error has occurred in JDeveloper".
Its asking for exit after saving files. Below is the stack trace.
I am using Jdeveloper 11.1.1.3, The latest version. and i installed most of the updates available in Check updates section.
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: oracle.portlet.client.connection.web.WebProducerConnection
     Dependent class: oracle.webcenter.internal.dt.config.ConnectionContextListener
     Loader: ide-global:11.1.1.0.0
     Code-Source: /D:/oracle/Middleware2/jdeveloper/jdev/extensions/oracle.webcenter.common.jar
     Configuration: extension jar in D:\oracle\Middleware2\jdeveloper\jdev\extensions
The missing class is not available from any code-source or loader in the system.
o.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2200)
o.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
o.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
o.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
j.security.AccessController.doPrivileged(Native Method)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
j.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
o.webcenter.internal.dt.config.ConnectionContextListener.<clinit>(ConnectionContextListener.java:81)
o.webcenter.internal.dt.addin.WebCenterFrameworkAddin$1.rescatContextRegistered(WebCenterFrameworkAddin.java:237)
o.j.rescat2.RescatContextRegistry.notifyContextRegistered(RescatContextRegistry.java:328)
o.j.rescat2.RescatContextRegistry.registerContext(RescatContextRegistry.java:93)
o.adf.share.dt.AppConnContext.getRescatContext(AppConnContext.java:221)
o.adf.share.dt.ApplicationConnectionsNode.applicationChanged(ApplicationConnectionsNode.java:94)
o.j.appresources.ApplicationResourcesWindow.notifyApplicationChanged(ApplicationResourcesWindow.java:298)
o.j.appresources.ApplicationResourcesNode.applicationChanged(ApplicationResourcesNode.java:66)
o.j.appresources.ApplicationResourcesWindow.applicationChanged(ApplicationResourcesWindow.java:236)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEventImpl(ApplicationNavigatorWindow.java:990)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEvent(ApplicationNavigatorWindow.java:974)
o.i.navigator.ApplicationNavigatorWindow.access$200(ApplicationNavigatorWindow.java:100)
o.i.navigator.ApplicationNavigatorWindow$1L.itemStateChanged(ApplicationNavigatorWindow.java:263)
jx.s.JComboBox.fireItemStateChanged(JComboBox.java:1205)
jx.s.JComboBox.selectedItemChanged(JComboBox.java:1262)
jx.s.JComboBox.contentsChanged(JComboBox.java:1309)
jx.s.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
jx.s.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
jx.s.JComboBox.setSelectedItem(JComboBox.java:557)
jx.s.JComboBox.setSelectedIndex(JComboBox.java:603)
o.i.navigator.ApplicationNavigatorWindow.initSelectedApplication(ApplicationNavigatorWindow.java:1135)
o.i.navigator.ApplicationNavigatorWindow.initToolbarArea(ApplicationNavigatorWindow.java:1035)
o.ideri.navigator.DefaultNavigatorWindow.initCommonItems(DefaultNavigatorWindow.java:384)
o.i.navigator.ApplicationNavigatorWindow.getGUI(ApplicationNavigatorWindow.java:695)
o.i.docking.DockableWindow.getHostedComponent(DockableWindow.java:231)
o.ii.docking.TitledPanelHolder.getOrCreateComponent(TitledPanelHolder.java:47)
o.ii.docking.TitledPanel.setPageVisible(TitledPanel.java:881)
o.ii.docking.TitledPanel.showClient(TitledPanel.java:858)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:841)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:819)
o.ii.docking.TitledPanel.loadVisibilityLayout(TitledPanel.java:1789)
o.ii.docking.DockPanel.loadVisibilityLayout(DockPanel.java:200)
o.ii.docking.AbstractDockPanelHost.loadVisibilityLayout(AbstractDockPanelHost.java:94)
o.ii.docking.DockStationImpl.onStartup(DockStationImpl.java:1634)
o.ii.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
o.ii.docking.DockStationListener.init(DockStationListener.java:36)
o.i.layout.Layouts.activate(Layouts.java:812)
o.i.layout.Layouts.activateLayout(Layouts.java:192)
o.ii.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
o.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:199)
j.a.EventQueue.dispatchEvent(EventQueue.java:597)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)

I did in this way.See the error message first.Try to understand the error and find out the extension name which is causing this problem.Go to tools-preferences-extensions and uncheck the respective extension and restart the jdeveloper.
If still this problem exists,go to <jdeveloper home>\jdev\extensions,close the jdeveloper app,delete the respective extension jar file and start jdeveloper.Thanks.

Install mulutple RAC databases on 2-node RAC cluster

I am installing 5 RAC databases on a 2-node RAC cluster. I have setup SCAN using 3 IP addresses.
Do I have to use SCAN listener for all databases?
When installing the 3 database, I get ORA-12537: TNS connection closed error.
ENV: 11gR2 2-node RH5.x
Thanks!

I have setup SCAN using 3 IP addresses.
Do I have to use SCAN listener for all databases?These 3 scan ip will work for youe all database running under this cluster setup.
you may also use VIP to make connection like 10g.
I get ORA-12537: TNS connection closed error.Appear some connectivity/configuration isue,please try MOS doc contain detail on this.
How to Troubleshoot Connectivity Issue with 11gR2 SCAN Name [ID 975457.1]

Automatic restart of services on a 1 node rac cluster with Clusterware

How do we enable a service to automaticly start-up when the db starts up?
Thanks,
Dave

srvctl enable service -d DBThanks for your reply M. Nauman. I researched that command and found we do have it enabled and that it only works if the database instance was previously taken down. Since the database does not go down on an Archiver Hung error as we are using FRA with an alt location, this never kicks in and brings up the service. What we are looking for something that will trigger off of when the archive logs error and switch from FRA(Flash Recovery Area) to our Alternate disk location. Or more presicely, when it goes back to a Valid status(on the FRA - after we've run an archive log backup to clear it).
I found out from our 2 senior dba's that our other 2 node rac environment does not suffer from this problem, only the newly created 1 node rac cluster environment. The problem is we don't know what that is(a parameter on the db or cluster or what) and how do we set it?
Anyone know?
Thanks,
Gib
Message was edited by:
Gib2008
Message was edited by:
Gib2008

All connections are connecting to 2nd node only in a 2 Node RAC Cluster

Hello,
I have a 10.2.0.3 database on a two node RAC Cluster with only one service configured. This service set to be preferred on both nodes.
However, all the connections are falling on Node2 only. Any idea where to look.
$> srvctl config service -d PSDB
psdbsrv1 PREF: psdb1 psdb2 AVAIL:
Thanks,
MM

Application is using the following connection string.
jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = PQ2-PS-db-01-vip)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = PQ2-PS-db-02-vip)(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = PSDBSRV1)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))))
--MM

Multiple databases/instances on 4-node RAC Cluster including Physical Stand

OS: Windows 2003 Server R2 X64
DB: 10.2.0.4
Virtualization: NONE
Node Configuration: x64 architecture - 4-Socket Quad-Core (16 CPUs)
Node Memory: 128GB RAM
We are planning the following on the above-mentioned 4-node RAC cluster:
Node 1: DB1 with instanceDB11 (Active-Active: Load-balancing & Failover)
Node 2: DB1 with instanceDB12 (Active-Active: Load-balancing & Failover)
Node 3: DB1 with instanceDB13 (Active-Passive: Failover only) + DB2 with instanceDB21 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB31 (Active-Active: Load-balancing & Failover) + DB4 with instance41 (Active-Active: Load-balancing & Failover)
Node 4: DB1 with instanceDB14 (Active-Passive: Failover only) + DB2 with instanceDB22 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB32 (Active-Active: Load-balancing & Failover) + DB4 with instance42 (Active-Active: Load-balancing & Failover)
Note: DB1 will be the physical primary PROD OLTP database and will be open in READ-WRITE mode 24x7x365.
Note: DB2 will be a Physical Standby of DB1 and will be open in Read-Only mode for reporting purposes during the day-time, except for 3 hours at night when it will apply the logs.
Note: DB3 will be a Physical Standby of a remote database DB4 (not part of this cluster) and will be mounted in Managed Recovery mode for automatic failover/switchover purposes.
Note: DB4 will be the physical primary Data Warehouse DB.
Note: Going to 11g is NOT an option.
Note: Data Guard broker will be used across the board.
Please answer/advise of the following:
1. Is the above configuration supported and why so? If not, what are the alternatives?
2. Is the above configuration recommended and why so? If not, what are the recommended alternatives?

Hi,
As far as i understand, there's nothing wrong in configuration except you need to consider below points while implementing final design.
1. No of CPU on each servers
2. Memory on each servers
3. If you've RAC physical standby then apply(MRP0) will run on only one instance.
4. Since you are configuring physical standby for on 3rd and 4th nodes of DB1 4 node cluster where DB13 and DB14 instances are used only for failver, if you've a disaster at data center or power failure in entire data center, you are losing both primary and secondary with an assumption that your primary and physical standby reside in same data center so it may not be highly available architecture. If you are going to use extended RAC for this configuration then it makes sense where Node 1 and Node 2 will reside in Datacenter A and Node 3 ,4 will reside in Datacenter B.
Thanks,
Keyur

Getting error while starting the RAC instance through SRVCTL utility

Hi DBA's,
We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
:oracle:/home/oracle]>
srvctl status database -d SQLTSTM2
PRKO-2015 : Error in checking condition of instance on node: r1racd
Instance SQLTSTM22 is running on node r2racd
oracle:/opt/oracle/product/10.2.0/db]>
NOTE: but i am able to start the instance thru SQLPLUS.
After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
Name Type Target State Host
ora....21.inst application OFFLINE OFFLINE
ora....22.inst application ONLINE ONLINE r2racd
ora....VLM2.db application ONLINE ONLINE r2racd
ora....21.inst application ONLINE ONLINE r1racd
ora....22.inst application ONLINE ONLINE r2racd
ora....STM2.db application ONLINE ONLINE r2racd
ora....SM1.asm application ONLINE ONLINE r1racd
ora....CD.lsnr application ONLINE ONLINE r1racd
ora.r1racd.gsd application ONLINE ONLINE r1racd
ora.r1racd.ons application ONLINE ONLINE r1racd
ora.r1racd.vip application ONLINE ONLINE r1racd
ora....SM2.asm application ONLINE ONLINE r2racd
ora....CD.lsnr application ONLINE ONLINE r2racd
ora.r2racd.gsd application ONLINE ONLINE r2racd
ora.r2racd.ons application ONLINE ONLINE r2racd
ora.r2racd.vip application ONLINE ONLINE r2racd
Thanks in advance...
Anil

Use the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
Also refere to Metalink note 295328.1

Getting error while Startting a BPM process programmatically

Hi Experts,
I am getting an error while trying to start the BPM process programmatically. What i have done till now is
1. Created a WS in process composer
2. Binded this ws with start of the process
3. Created input parameters
4. Testing it in WS Navigator
I am following this doc /people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
and I am getting error while testing in WS Navigator. I am getting error at the last step i.e. in result step and the error is
Web Service returned an error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Client" Fault String: "No operation found using soap keys [], [cn_comments]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: (BindingType=Soap, SEIName=NewWSDLFile, BindingQName=(http://www.example.org/NewWSDLFile/)NewWSDLFileSOAP, PortTypeQName=(http://www.example.org/NewWSDLFile/)NewWSDLFile, SoapVersion=SOAP11, Galaxy_SDO=true, InterfaceMappingID=45ffb27c:1237f972cd8:-7d7e)."
If possible can any one help me out.
Thanks and regards
Pranav

Hi Arafat,
Thanks for replying. Yes i have completed the output mapping. Input parameters i need for this service are :
1. cn_comments
ca_comments
2. cn_planningGroup
ca_account
ca_serialnumber
and few more attributes
Now, what i did was i have created a complex type and added elements in it. But to my surprise i was not able to get these nodes and elements in output mapping. So, i changed the type of "parameter" from "new operation" to my complex type. By doing this i was able to get my nodes and elements in output mapping. Now i tested the entire thing in WS Navigator and i got that error.
Please suggest how o proceed.
Regards
Pranav

Creating custom activity( DSC service)..but getting errors while starting service in workbench

Hi ,
I have some hands on   developing the process. So I started creating one custom activity.
I created one activity which takes inputs and gives a string after some calculation. But program requires some additional jar files which are included as lib folder in my java project.
I exported java project as jar file and installed successfully in the workbench. But while starting the component .. getting error like ::
Caused by: java.lang.ClassNotFoundException: No ClassLoaders found for: net.fortuna.ical4j.model.Date
at org.jboss.mx.loading.LoadMgr3.beginLoadTask(LoadMgr3.java:212)
at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:514)
at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:408)
at java.lang.ClassLoader.loadClass(Unknown Source)
at org.ungoverned.moduleloader.ModuleClassLoader.findClass(ModuleClassLoader.java:291)
at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:164)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 117 more
Please find full description of the error in the attachment. Hope LC is   not taking added jars in the lib.
Because of this error i am not able to go forward.
Do I need to add/include the necessary   jars into LC ? .
Please guide me how to resolve this error.
Waiting for your answer.
Thanks
Praveen

Putting the jar in the appserver's lib folder is one way to have the class found at runtime, but not all sites will allow you to do this because you just made it available to everything running on the appserver. Plus, now as you move your dsc around from test to staging to production, you have to remember to move the jar as well.
The alternative is to include the jar in your DSC and reference it in the classpath node in the component.xml file.
Just checkout how the distributed DSCs do it (adobe-remoteevents-dsc shows 2 jars in the root of the package and both are referenced in the component.xml's classpath.
Jon

Getting error while starting the server.

I am getting the following error while starting the server. Please help
trc file: "C:\SAP\JP1\JC00\work\dev_jstart", trc level: 1, release: "710"
sysno      00
sid        JP1
systemid   560 (PC with Windows NT)
relno      7100
patchlevel 0
patchno    0
intno      20063500
make       multithreaded, Unicode, optimized
profile    C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
pid        2240
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, JM
arguments :
arg[ 0] : C:\SAP\JP1\SYS\exe\run\jstart.exe
arg[ 1] : pf=C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
F
F [Thr 3540] Tue Sep 04 20:55:33 2007
F [Thr 3540] SfCJdkConfig::get: JDK home directory is set by profile
F [Thr 3540]      Java home: C:\SAP\JP1\SYS\exe\run\sapjvm_5
F [Thr 3540] SfCJdkConfig::get: Java VM type is set by profile
F [Thr 3540]      Java VM type: server
F ********************************************************************************
F Java SDK properties (C:\SAP\JP1\JC00\work\jstart.jdk)
F    root directory    : C:\SAP\JP1\SYS\exe\run\sapjvm_5
F    vendor            : SAP AG
F    version           : 1.5.0_07-b00
F    cpu               : x86
F    java vm type      : server
F    jvm library name : jvm.dll
F    library path      : C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin\server;C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin
F    executable path   : C:\SAP\JP1\SYS\exe\run\sapjvm_5\bin
F ********************************************************************************
I [Thr 3540] MtxInit: 30002 0 2
F [Thr 3540] JsfCreateShm: ShmCreate(79, 4096, ATTACH) failed (rc = 3 SHM segment doesn't exist)...
F [Thr 3540] SfCInstanceManager::newState: starting run level 1.
F [Thr 3540] *** ERROR => SfICreateFiElem: FiInit(JSF-FI-BRSESS, 1, 32) failed (rc = 6 invalid argument) [jsfxxshm.c   1909]
F [Thr 3540] *** ERROR => SfEInternalError: SfCInstanceManager::createDynShm: JsfCreateDynShm failed (rc = 1 general error) [sfxxinst.hpp 349]
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : jstart.exe (pid=2240)
When      : 9/4/2007 20:55:34.296
Threads   : 2
Computer Name       : EMPMXMOBILE
User Name           : SYSTEM
Number of Processors: 2
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version     : 5.1 Current Build: 2600
Stack Dump for Thread Id dd4
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0006f784 00000000 7c8025cb 00000000 00000604 00000000 ntdll!KiFastSystemCallRet
0006f7fc 00000000 004385ac 00000000 00000604 00000000 kernel32!WaitForSingleObject
0006f820 00000000 0044aeee 00000000 0044af27 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
0006fa40 00000000 7c9106eb 00000000 78134d85 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
005b36b8 00000000 00000000 00000000 00000029 00000000 ntdll!RtlAllocateHeap
Stack Dump for Thread Id dd8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0172feac 00000000 7c8314a6 00000000 00000674 00000000 ntdll!KiFastSystemCallRet
0172ff74 00000000 781329b9 00000000 00000000 00000000 jstart!FcaConnection_fcaCloseOutput
0172ffac 00000000 78132a45 00000000 7c910738 00000000 MSVCR80!endthreadex
0172ffec 00000000 00000000 00000000 781329df 00000000 MSVCR80!endthreadex
F
F [Thr 3540] Tue Sep 04 20:55:34 2007
F [Thr 3540] SfCOptions::doExit: goodbye... (exitcode 1, retcode 1)

Hi Viji,
            It seem's some memory(RAM) problem is strucking, can you try to shut down the OS and try to start the server?
Regards,
Hari.

Getting error while starting weblogic server in jdeveloper

getting an error while starting weblogic server in jdeveloper
IN LOG(its shows following):
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
User 'principals=[weblogic, Administrators]' has administration role. All tasks by adminstrators must go through an Administration Port.
**** Authentication error while connecting to application server IntegratedWebLogicServer. Please check settings.
**** Failed to complete start-up of application server IntegratedWebLogicServer.
[Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
[Forcing termination of IntegratedWebLogicServer]
taskkill /F /PID 1620
Process exited.
PLs help me

User, please tell us your jdev version!
Somehow your credentials are corrupted. Two possible solution:
1) open your system11.1.1.xxxx folder open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Remove the '(AES)...' part after username and password and write the new ones e.g. username=weblogic', password='Welcome1'. Save the file and try to start the integrated server again. Once the server starts the entries are encoded again.
2) if 1) does not work, remove the whole DefaultDomain folder and create a new WLS instance inside jdev.
Timo

Getting error while starting Managed Server

Hi All,
I configured Custered environment in Weblogic 9.2 to use in ALSB.
While starting managed server i am getting error :
<Critical> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666363188> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:941)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000365> <Server state changed to FAILED>
####<Feb 3, 2009 6:36:04 PM IST> <Error> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364594> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Feb 3, 2009 6:36:04 PM IST> <Info> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364891> <BEA-000236> <Stopping execute threads.>
Can anybody pls guide me to solve this erro.
Thanks,
Kartheek

This statement should be prominently displayed in this and all similar forums, but the best advice I can give anyone here is that if you're struggling with a problem for several DAYS, not to mention weeks, and the only resource you've used is this forum, you should file a support request with Oracle right now. That is one of the most important skills you will need to use WebLogic effectively.

Getting error while starting Managed server configured in ALSB(ClusteredEnv

Hi All,
I configured Custered environment in Weblogic 9.2 to use in ALSB.
While starting managed server i am getting error :
<Critical> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666363188> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:941)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000365> <Server state changed to FAILED>
####<Feb 3, 2009 6:36:04 PM IST> <Error> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364594> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Feb 3, 2009 6:36:04 PM IST> <Info> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364891> <BEA-000236> <Stopping execute threads.>
Can anybody pls guide me to solve this erro.
Thanks,
Kartheek

You probably changed your system password in the console?
Look for your boot.properties file in the following location:
[domain]\servers\[server]\security
change the following line:
password={3DES}Ytm72Oh4zE0bsptrYn13Xw==
to:
password=mynewpassword
WebLogic Server will encrypt the password on the next boot, and your problem should be resolved.

Getting Error while creating device configuration (Schema Node ref problem)

Hi,
In MDM 2.0.1, I created the following(in order) :
1.UOM
2.Measuring Component Type
3.Device Configuration Type
4.Service Provider
5.Device Type
6.Device
But when trying to Configure the created Device, its showing some error as...
Schema node isNewCase (/schema/[includeDA F1-CommonToDoEntryData]/isNewCase) references non-existent service field NEW_CASE_SW.
After this has happened, i couldn't even add another configuration to some of my Existing Devices..
(But for Some existing devices, adding a new configuration doesn't throwing errors..)
Please help regarding this...

Is the Measuring Component Type u created is added in DeviceType's ConfigType list..?

Getting Error in starting VIP in 3 NODE RAC Cluster in VMWARE

Similar Messages

Maybe you are looking for