Getting error in trasfer plant details from R/3 system to APO

We are planning to transfer plant from R/3 system to APO as location.
After generating integration model (CFM1) and transferring it to APO trough transaction
CFM2, we are getting below error .it is fetching geographic details like langitude and lattitude from some table result in dump.
Please see attached file from more details.
Error contains time and date values are always same,there might be because of buffer.
Please provide some valuable reason to avaoid issue.
Thanks

Nitin,
CIF across XXXX first, then YYYY.
Best Regards,
DB49

Similar Messages

Getting error message on ungrade install from itunes 10 to itunes 11

getting error message on ungrade install from itunes 10 to itunes 11

What does the error message say? (Precise text, please.)

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Update Plant details from MM to SRM for an already replicated plant

Hi All,
In order to replicate all plants from MM to SRM, we use program - BBP_GET_LOCATIONS_ALL
In order to replicate selected plants from MM to SRM, we use program - BBP_GET_LOCATIONS_SELECTED
In case a plant has already been replicated from MM to SRM, and subsequently the plant address details are changed in MM,
what is the process to reflect the changed plant details in SRM side? Is there a separate program for this?
Please advise.
Thanks in advance,
Ruchika

Hi
LOCATIONS reports helpful to bring plant data into SRM as a business partner.
even you do run a report again you maigh get a report that plant BP updated successfully in SLG1 log.
you can test them in develoment box.
but we dont deal with any processing in EBP other than plant number.
Plant address is not a ship to address as in EBP . Ship to address attributes helps for f\delivery address.
i believe no harm in plant ADDRESS data in srm.
BR
Muthu

Getting error while opening Excel document from SharePoint site

Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/

Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting error in consuming google webservices from JspDynPage

Hi All,
Getting following error while consuming google webservices from JspDynPage
An exception occurred while processing a request for :
iView : GoogleSer.google
Component Name : GoogleSer.google
Could not find portal application com.company.global.enterprise.portal.wsdl.webservices.service.
Code :
MyGoogle googleService =
(MyGoogle) PortalRuntime.getRuntimeResources().getService("com.company.global.enterprise.portal.wsdl.webservices.service.MyGoogle");
GoogleSearchResult result = googleService.doGoogleSearch("google", "SAP", 0, 10, false, "", false, "", "", "");
ResultElement[] results = result.getResultElements();
if(results != null) {
response.write(" Search Result Size " +results.length );
for (int i = 0; i < results.length; i++) {
response.write((i + 1) + ": " + results);
Thanks
Rudra

Hi,
I am still having the same problem, however the scenario in which I am getting varies.
I am getting this exception:
"com.sap.engine.services.webservices.jaxm.soap.accessor.NestedSOAPException: IOError while working with the message."
Some users when trying to login into the portal are getting blank screen and for some the portal launcher page is loading fine and could go to the Home Page.
When I view the logs I am seeing the Nested Soap Exception.
Any Ideas??? Starting the J2EE engine also did'nt help.
Thanks in advance.
Madhavi

Getting error in a soap proxy from an applet

Hi, I'm getting error in Applet window while it trying to get the SOAP PROXY from Applet. Does any one came cross this type of the problem? Please help!!!
Description:
I am using BEA workshop 8.1.4, I have created JSP which contain the Applet. Applet has following two and more tags.
codebase="/bea_wls_internal/classes/aanDemoTest@DemoWeb"
code="ConnectionApplet"
Where "ConnectionApplet" is simple java class extended from JApplet. Which try to get Java Proxy.
Code Section:
weblogic.jws.proxies.RmGetApi_Impl proxy =
new weblogic.jws.proxies.RmGetApi_Impl(RMurl);
RMClientProxy = proxy.getrmGetApiSoap();
FYI: I have created client jar and webserviceclient jar a describe in one of the BEA Doc. Everything builds fine. But I am getting Error when I try to access from web(IE).
Error in JAVA-Plug-IN window:
unable to find the type mapping resource file for:weblogic.jws.proxies.rmGetApi
I turn on the debug option in PLUG-IN and it show me that it trying to access the - rmGetApi.xml which is part of the clientjar file and it is not finding.I also test from my browser I can access the RmGetApi.class but I can't access the XML which is in same jar.

Which window handle your talking about? Browser window?
If so use the netscape.javascript pacakage
import netscape.javascript.*;
JP

To get line item and confirmation details from CRM_ORDER_READ

Hi,
Please can anybody let me know which the field from which i can get line item details and material for the service order given?
I am using CRM_ORDER_READ to retrieve the values. In that i am exporting 4 fields - et_orderadm_h, et_orderadm_i, et_product_i, et_doc_flow. So from where to get line items and material id from these fields?
I will be very thankful if i get the answer of this question.

Hi,
The attribute NUMBER_INT of ET_ORDERADM_I contains the Item Number.
Hope this helps!
Regards,
Rohit

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Getting error message when purchasing app from store.

hi people, whenever i try to download any paid app after filling all the required details of my card im getting error message saying "payment method declined", why so?? can anyone help??

aayushp wrote:
I've been having the same issue. It was all fine until yesterday when I was searching for updates.
Since when have you been seeing this error message?
Last time I checked for an update was about 2 weeks ago and there were no errors reported. However, today I wanted to update iTunes to version 10.7 and decided to use the standalone installer rather than the SU version. Still, I decided to run the MAS Software Update function in order to ensure that my computer had all its software up-to-date and then I get this message. I don't think that me installing iTunes is to blame. Probably, it could be an internet connection problem on Apple's end I am still submitting a bug report to Apple.
Now one question, who is your ISP (internet service provider)? In my case I have Comcast and I am in Florida.
Thanks for your reply!

I NEED TO GET LOGIN AND LOGOUT TIMING DETAILS FROM CLIENT SYSTEMS

HI,
CAN ANYONE PLEASE HELP ME ON HOW TO GET LOGIN AND LOGOUT , CLIENT EVENT DETAILS FROM CLIENT SYSTEMS ON SERVER 2008 R2.
THANKS,
KUMAR.

You may need to enable active directory Logon/Logoff Audit event.
The Audit logon events policy records all attempts to log on to the local computer, whether by using a domain account or a local account.
On Domain Controller, this policy records attempts to access the DC only.
By using these events we can track user's logon duration by mapping logon and logoff events with user's Logon ID which is unique between user's logon and logoff.
Please refer to this blog to understand the complete process to audit the successful or failed logon and logoff attempts in the network using the audit policies :
http://www.lepide.com/blog/audit-successful-logon-logoff-and-failed-logons-in-activedirectory/
Lepide - Simplifying IT Management

Canon MX860 get error 300 when printing wirelessly from MacBook Pro

I've been printing wirelessly for several years and most recently after an upgrade to OS X 10.10.1 Yosemite it was printing fine until this morning. Something changed and I get error 300 when I try to print. If I connect my MacBook to the Canon MX860 printer using the USB cord it prints fine so I'm assuming it's some sort of wireless connection issue. I powered down and up both the printer and the Macbook and still get the error. I tried the "Reset Printer System" from the System Preferences and now I can't add the printer back in. I tried using the CD that came with the printer to reinstall the wireless connection and the set-up program says it's incompatible with my operating system and refuses to run. Any assistance to help me print wirelessly again would be very much appreciated. Thank you.

After further investigation, we believe this is due to an intermittent modem problem and is not the fault of the printer or MacBook.

Getting Error while Execute SSIS Package from Console Application

Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik Ramwani

The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012

How to get errors and/or air.trace() from installed air app?

I'm trying to debug an installed air app that behaves
differently once installed than when run with adl. However, i can't
figure out any way to get errors or air.trace() information. I am
on OS X (10.5.6). Any tips?
I imagine this should be easy since debugging an installed
app is pretty much a necessity for development.

You can enable logging to a text file using settings in the
mm.cfg file. See
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19323
Note that ALL trace output will go to the log.
Other things you can do are:
1. Run the installed app with adl -- just pass the installed
app descriptor to adl on the command line
2. Supply a publisher id to adl. This removes one difference
between installed/ not installed apps and may be enough if the
behavior issue has to do with local connections or other matters
involving the publisher id.
3. Use the adl -nodebug flag. This removes another difference
between installed/uninstalled apps. You won't see uncaught
exceptions, but trace statements are still reported.

Getting Error Logs Every Minit's From 5k

Hi,
Am getting every minit's this below logs.........
Can i know why it's happening....
Please advice me....
Logs:
=====
2012 Sep 3 17:17:42 5k %ETHPORT-5-IF_UP: Interface Ethernet106/1/3 is up in mode access
2012 Sep 3 17:17:55 5k %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet106/1/2 is down (Link failure)
2012 Sep 3 17:17:56 5k %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet106/1/3 is down (Link failure)
2012 Sep 3 17:17:58 5k %ETHPORT-5-SPEED: Interface Ethernet106/1/2, operational speed changed to 1 Gbps
2012 Sep 3 17:17:58 5k %ETHPORT-5-IF_DUPLEX: Interface Ethernet106/1/2, operational duplex mode changed to Full
2012 Sep 3 17:17:58 5k %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet106/1/2, operational Receive Flow Contr
ol state changed to off
2012 Sep 3 17:17:58 5k %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet106/1/2, operational Transmit Flow Cont
rol state changed to on
2012 Sep 3 17:17:59 5k %ETHPORT-5-IF_UP: Interface Ethernet106/1/2 is up in mode access
2012 Sep 3 17:17:59 5k %ETHPORT-5-SPEED: Interface Ethernet106/1/3, operational speed changed to 1 Gbps
2012 Sep 3 17:17:59 5k %ETHPORT-5-IF_DUPLEX: Interface Ethernet106/1/3, operational duplex mode changed to Full
2012 Sep 3 17:17:59 5k %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet106/1/3, operational Receive Flow Contr
ol state changed to off
2012 Sep 3 17:17:59 5k %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet106/1/3, operational Transmit Flow Cont
rol state changed to on
2012 Sep 3 17:17:59 5k %ETHPORT-5-IF_UP: Interface Ethernet106/1/3 is up in mode access
NX5K005#
=====================================================
NX5K005# sh running-config | b Ethernet106/1/2
interface Ethernet106/1/2
interface Ethernet106/1/3
interface Ethernet106/1/4
description MSSQL01
switchport access vlan 3838
spanning-tree port type edge
interface Ethernet106/1/5
description BCKUP01
switchport access vlan 3200
spanning-tree port type edge
=======================================================
show vpc brief
vPC Peer-link status
id   Port   Status Active vlans
1    Po130 up     1,700-701,798,920-923,1100-1103,1105-1108,1110-111
                   3,1115-1118,1120-1123,1125-1128,1130-1133,1135-113
                   8,1140,1145,1150,1155,1160,1165,1300-1303,1305-130
                   8,1310-1313,1315-1318,1320-1323,1325-1328,1330-133
                   3,1335-1338,1340,1345,1350,1355,1360,1365,1500-150   ....
vPC status
id     Port        Status Consistency Reason                     Active vlans
13     Po13        up     success     success                    1,700-701,7
                                                                 98,920-923,
                                                                 1100-1103,1
                                                                 105-1108,11
                                                                 10-1113....
105    Po105       up     success     success                    -
106    Po106       up     success     success                    -
106496 Eth105/1/1 up     success     success                    3830
106497 Eth105/1/2 up     success     success                    1
106498 Eth105/1/3 up     success     success                    1
106499 Eth105/1/4 up     success     success                    3838
107520 Eth106/1/1 up     success     success                    3830
107521 Eth106/1/2 up     success     success                    1
107522 Eth106/1/3 up     success     success                    1
107523 Eth106/1/4 up     success     success                    3838

Thanks i will check and let you know....
The one more switch also am getting Error Logs please check and let me know this link fluctuating when i see the "Shoe VPC" some time showing link down please see below logs.
advice me ASAP.
Error Logs:
===========
2012 Sep 4 10:22:42 NX5K %ETHPORT-5-IF_UP: Interface Ethernet107/1/2 is up in mode access
2012 Sep 4 10:23:52 NX5K %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet107/1/2 is down (Link failure)
2012 Sep 4 10:23:55 NX5K %ETHPORT-5-SPEED: Interface Ethernet107/1/2, operational speed changed to 1 Gbps
2012 Sep 4 10:23:55 NX5K %ETHPORT-5-IF_DUPLEX: Interface Ethernet107/1/2, operational duplex mode changed to Full
2012 Sep 4 10:23:55 NX5K %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet107/1/2, operational Receive Flow Contro
l state changed to off
2012 Sep 4 10:23:55 NX5K %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet107/1/2, operational Transmit Flow Contr
ol state changed to on
2012 Sep 4 10:23:55 NX5K %ETHPORT-5-IF_UP: Interface Ethernet107/1/2 is up in mode access
2012 Sep 4 10:24:09 NX5K %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet107/1/2 is down (Link failure)
2012 Sep 4 10:24:12 NX5K %ETHPORT-5-SPEED: Interface Ethernet107/1/2, operational speed changed to 1 Gbps
2012 Sep 4 10:24:12 NX5K %ETHPORT-5-IF_DUPLEX: Interface Ethernet107/1/2, operational duplex mode changed to Full
2012 Sep 4 10:24:12 NX5K %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet107/1/2, operational Receive Flow Contro
l state changed to off
2012 Sep 4 10:24:12 NX5K %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet107/1/2, operational Transmit Flow Contr
ol state changed to on
2012 Sep 4 10:24:13 NX5K %ETHPORT-5-IF_UP: Interface Ethernet107/1/2 is up in m
Show VPC:
===========
108544 Eth107/1/1 up     success     success                    3830
108545 Eth107/1/2 down* failed      Consistency Check Not      -
                                      Performed
108546 Eth107/1/3 up     success     success                    1
108547 Eth107/1/4 up     success     success                    3838
Within One Minit same link fluctuating:
=======================================
Show VPC:
========
108544 Eth107/1/1 up     success     success                    3830
108545 Eth107/1/2 up     success     success                    1
108546 Eth107/1/3 up     success     success                    1
108547 Eth107/1/4 up     success     success                    3838
Regards,
Senthil

Getting error in trasfer plant details from R/3 system to APO

Similar Messages

Maybe you are looking for