Getting error in upgrading from Sap 2005 to sap 8.8
Hi everyone,
I am upgrading my client from sap 2005 to sap 8.8.During the pre check wizard system is getting some error and creating the log file.The coming error is:
Test result: Not completed due to SBOErr -2004 in function CDagCheckUTBRecordInconsistence::DoCheck(), error text: Open user defined table failed. # # MID=-1 BOID=-1 BO= UserID= D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe Version=8.80.237 Area= PID=4400 TID=4064 D:\depot\BUSMB_B1\8.8_REL\SBO\8.8_REL\Application\SolutionPatch\Component\Logger.cpp 105
25/02/2011 13:52:11:765625 UpgradeWizard Note I Technical End time: 20110225 1:52:11PM # # MID=-1 BOID=-1 BO= UserID= D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe Version=8.80.237 Area= PID=4400 TID=4064 D:\depot\BUSMB_B1\8.8_REL\SBO\8.8_REL\Application\SolutionPatch\Component\Logger.cpp 105
25/02/2011 13:52:11:765625 UpgradeWizard Note I Technical Test result: Error # # MID=-1 BOID=-1 BO= UserID= D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe Version=8.80.237 Area= PID=4400 TID=4064
I searched so much on this in the portal but still not able to find any solution..
Please help me out to fix this error..
Thanks
Ankit Garg.
Hi ANkit,
if it is showing error during pre check wizrad, it will be showing SAP note number in front of that error. check the note number details .
Thanks,
Neetu
Similar Messages
-
Error while upgrading from 8.82 to SAP 9.0 PL6
Hello Expert,
I want to upgrade my one of database from SAP 8.82 PL6 to SAP 9.0 PL 6.
But when upgrading it give me error.
For error plz find attachment.
I checked the doc num and series but no one series or doc numbering are overlapping to each other.
Plz give me sol as early as possible.
Regards,
SandyHi,
Please refer SAP note and you have raise to ticket to SAP support.
1359765 - Compliance check of document number in upgrade wizard precheck
Thanks & Regards,
Nagarajan -
Error after upgrading from sap b1 pl 35 to pl 49
hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
JennyHello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon -
Error during Upgrade from 4.6c to ECC 6.0
Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar KHi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar -
How to I get library songs upgraded from 128k to 256k
How to I get library songs upgraded from 128k to 256k. That is the reason I signed up for match in the first place.
Upload all your music to iTunes Match. Now that all your music is in iCloud iTunes Match service. You can now delete all your current music on your computer. Now download all the music from the iCloud and your music will be 256k. That is for PC or Mac.
On your iPhone, as soon as you download the music to your iPhone. The songs will be 256k. -
I keep getting errors when updating from the Creative Cloud (49)
I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Can I get a free upgrade from photoshop elements 11 to the 13? I have 11 and my laptop is 64 bit. registered software bought aug 2013
There is no free upgrade. You have to buy it.
Mylenium -
I have Safari 5.1.10 Browser and keep getting notices to upgrade from my bank. What is the best upgrade?
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Getting error while upgrading rpd to 11g from 10g
Hello,
I have a rpd using obiee 10g.I want to open the same in obiee 11g,but getting error like need to run one file.
obieerpdmigrateutil.exe.
So i just run with -i,-u and -o option, that now i am getting this error->
The file 'DBFeatures.INI' is required for RPD migration and could not be located. Please ensure that ORACLE_INSTANCE is pointing to a valid instance directory.
ThanksHi akshara,
Firstly you need to upgrade from 10g to 11g,you need to run a .bat file from the path and follow some steps like collecting the artifact files like NQSconfig.ini,instanceconfig.xml,DBfeatures.ini with RPD and catalog to upgrade to 11g.
Here is the step by step process to upgrade and some artifact files manually given in step 2 of this blog http://prolynxuk.com/blog/?p=424
http://www.biconsultinggroup.com/images/VideoAlbum/OBIEE11gUpgrade11-4-10.pdf
(OR) standard documentation Start here http://download.oracle.com/docs/cd/E1457101/bi.htm_
If still the problem exists you manually update the DBfeature.ini file going to the specific location in 10g and copy them to 11g path.
hope helps you.
Cheers,
KK -
Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0
Hi
We are upgrading from 4.6c to ECC 6.0. In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type.
While executing depreciation run, it got terminated and I have done the above changes. After that I have restarted the Depreciation. I have got the following error Message.
Message(s) during check of document ERROR00001
Message no. AAPO511
S:/SAPDMC/LSMW_AUX_020:006 20
Message no. /SAPDMC/LSMW_AUX_020006
If any body aware solution, kindly reply to this message
Thanks
sivaCheck this useful links
Key differences between SAP 4.6 - ECC 6.0
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
LE/WM functionality difference between 4.6c and ECC 6.0
differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes -
Login Error after Upgrading from BW 3.5 to BI 7.0
Hi Experts,
We have carried out an upgrade from BW 3.5 to BI 7.0.
After Upgrade we are not able to login using SAP GUI. we are getting an error saying..
Username or Password not Valid..
During the upgrade (in Netweaver 2004s ) is there procedure necessary to be followed, which we could have missed..
Your response will be greatly appreciated.
Regards
LRaghunahthHi
Thanks a lot for your reponse.
Basically I am able to login thru sap* / ddic and can unlock the users / reset the password.
But the customer wants to know why the user is getting locked and it happened because of any procedure miss whil performing the upgrade..
if it is usual that users get locked during upgrade, any SAP Notes to refer..
Thanks a lot for helping in this community.
Best Regards
L Raghunahth -
Schema error after upgrade from 4.6C to ECC 5.0
Hi all,
We have recently upgraded from 4.6C to ECC 5.0. We are having problem in payroll run. When I did a syntax check in schema, I got "UDPM" rule doesn't exist. I checked, this rule is present in 4.6C. This is the standard rule. If I am right, it should have come with upgrade right?
or SAP has changed this? From where Can I get the info about this?
Also similar error I got in Function 'USTAX' parameter 3 is not allowed. If I remove that parameter, I don't know what is the implication of that.
I checked for SAP notes. I did not find anything.
Please let me know if any of you have come with such situation.
Thanks in advance.
Sarika.Hi Sarika,
We are also in a similar transition i.e. 4.6C to mysap Ecc5.0 . But we are on Canadian Payroll.
I had search OSS and got a PDF document regarding " Upgrading to SAP R/3 Enterprize - A User Guide to Canadian mysap HR Customers" . U may be can find a similar one for US payroll. I can give u mine, but it wont be of any use as it is for Canadian Payroll.
In Canadian mysap Upgrade , the function P0224 has been replaced by function KXDTM . Although P0024 is still in used in Schema K00T for conversion purposes.
Regards,
Jay Gandhi -
Maxdb give Kernel error after upgrade from 7.3 to 7.5
Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
The details of the error in knldiag are:
2008-07-02 14:22:39 19 11554 COMMUNIC UKT8 attached big comseg at 0x700000060000000
2008-07-02 14:22:39 19 11555 COMMUNIC UKT8 big comseg ends at 0x7000000601803F8
2008-07-02 14:22:39 16 ERR 20152 RTE UNIX change owner with chown(knltrace,964,202) failed: Not owner
2008-07-02 14:22:39 16 11000 vdevsize 'knltrace', 666 failed
2008-07-02 14:22:39 16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
2008-07-02 14:22:39 16 ERR 11599 BTRACE -
> Emergency Stack Back Trace <----
As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
thanksHello Thomas,
-> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
Please check the upgrade log in the /sapdb/data/wrk
-> Please check the ownership of the files in the database RUNDIRECTORY.
For example, if the database owner:group of your database is sdb:sdba, then
-rw-rw---- 1 sdb sdba u2026. knltrace
-> Please update the thread with the output of the following commands :
sdbregview -l
xinstinfo SD3
id sdb
ls -l <runditectory>
< rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
more /etc/opt/sdb
Thank you and best regards, Natalia Khlopina -
XLR run-time error when upgrading from 2007A PL 39 to PL 42
My client recently upgraded from 2007A PL 39 to Pl 42, In PL 39, everything, including XLR, was running smoothly. Mow when client tried to open SBO, he gets this message:
XL Reporter
Run-time error u2018430u2019:
Class does not support Automation or does not support expected interface
The client has uninstalled and re-installed mythe client software, but gets the same error.
Any suggestions?Hi Katie,
this error can occur with a DIAPI version mis-match. Again note 1247315 should help you in this regard, as there are steps there to follow.
If the note doesn't help, you could also set the logging level to 6 which would provide more information:
a. Locate the following key in the registry:
My computer\HKey_Current_User\software\SAP\SAPManage\SAP Business One\AddOn
b. Double click on logging level and enter value 6
c. Start XLR
Please send the log in SAP Business One Log folder from
Start->Run->%type%, you'll find log called SAPAddOn_01.log
Kind Regards,
Lilian Lynch
SAP Business One Forums Team -
ABAP Consumer Proxy error after upgraded from 7.0 SP14 to 7.01 SP3
The ABAP consumer proxy was created in ECC6 with Netweaver 7.0 SP14. After the system was upgraded to Netweaver 7.01 SP3 the proxy call started to get error back.
The first error message from the service provider said "SoapException: Server did not recognize the value of HTTP Header SOAPAction". This error was resolved by manually putting the correct action in the SOAManager configuration.
Ran the same test again and then the service provider complained about the To field in the SOAP Header. The error message said "SoapHeaderException: SOAP header To was not understood".
Below is the To field in the Requesting XML message from the 7.0 SP14 system that worked fine:
<n3:To soap-env:mustUnderstand="1" xmlns:n3="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope">
http://localhost:50081/AddSix.asmx
</n3:To>
Below is the To field in the Requesting XML message from the 7.01 SP3 system that did not work:
<wsa:To soap-env:mustUnderstand="1" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
http://localhost:50081/AddSix.asmx
</wsa:To>
It looks like the issue is with the xmlns:soap-env element that has different values in these two systems. Searched in SDN but could not find any related information. Please help if anyone has experienced similar issue or knows how to fix it.
Thanks,
JiannanGot solution from SAP through an OSS message. Below is SAP's solution:
Either the Message ID protocol should be switched off on the SAP
consumer side or turn on this protocol support on the .NET provider.
To switch off the Message ID protocol:
1. start the soa manager
2. find the consumer proxy
3. find the corresponding logical port
4. jump to the 'Messaging' tab
5. choose the 'Suppress ID Transfer' from the dropdown list of the Message ID Protocol field
Besides this setting I also have to specify the operation in the Operation specific tab of the logical port configuration.
Maybe you are looking for
-
I have a Power Mac 5 WITHOUT an intel processer/ I have updated my computer to snow lepord which is as far as I can go. I am unable to use the cloud. I used to have a Mobileme account and used it when I traveled to foreign countries yo read email.
-
Insertion Data Containing Special Characters
Hi, I exported my table data to an ascii file using TOAD, which created the insert statements for me. I intend to insert these data to another database. The problem is that the data contains some characters like single quote and ampersand which would
-
I copied all of my pictures from my pc to cds and imported them to iphoto. i have a problem with which folders my pictures end up in. for instance, in my iphoto library one main folder is a year ,"2003", which leads to another folder, a number, "6",
-
A person can have multiple assignments as an employee.
I'm interested for the architecture using 2 PERNR. A person can have multiple assignments as an employee. To make a distinction between employment relationships (employees = 0EMPLOYEE) and real people (0PERSON), the person is an attribute of the empl
-
Converting a TreeMap to ArrayList
Hi Friends, I have a TreeMap with some values. I want to make an ArrayList out of this which contains all the elements which are in TreeMap. For this, I first got the keySet from TreeMap. Using the Iterator, Iam trying to fetch the keys, and thus the