Getting error in XI"RFC Program Not Found"
Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit
Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit
Similar Messages
-
When i try to open iTunes I get error message "MSVCR80.dll was not found"
When I try to open iTunes I get error message "MSVCR80.dll was not found"
Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
I have uninstalled and reinstalled I Tunes multiple times with same error.
Can anyone offer a solution?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Getting error:Absence type 100 was not found in Customizing for
Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks. -
While running servlets getting errors 404 or 505 resource not found
Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.*
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------nammathamizhan wrote:
Hi all,
I'm novice to J2EE.
You're also a novice to this forum.
First, turn off the bold font.
Second, post your question once and only once to a single forum. You only waited an hour before reposting your question. That's not the way this works. Asking your question multiple times will not increase the likelihood that you''ll get an answer. As a matter of fact, you're guaranteed nothing at all. Give it your best effort and hope for success. This isn't a paid consultancy - we're volunteers.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
If you're correct, and it's deployed, that would suggest that the URL you gave is incorrect.
>
Now let me elaborate what i've done till now.Good info - almost too much.
% -
Getting Error base class BitmapAsset was not found
I am converting a project using Away3D boomstick to the new FL11 version. I have installed the 4.5.1 SDK, dropped in the new away3d classes, added the flashplayer11_b1_playerglobal_071311.swc and now I get the following error.
Description Resource Path Location Type
1017: The definition of base class BitmapAsset was not found. Mercer-Molehill line 10 Flex Problem
Any Ideas? I really need to get this working for a demo tomorrow.It seem the right playergloblal is not accessed. If You compile in Flash IDE make sure that ActionsScript Settinng is configure with the rigth paths.
The SDK 4,5 has change the name of flex.swc to core.swc and others files.
Flex 4.5 Framework Differences
flex.swc and utilities.swc were renamed to core.swc and authoringsupport.swc
The datavisualization.swc was split into charts.swc and advancedgrids.swc.
Path to sdk
I put all those SWC in a folder in C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\flex_sdk\4.5\
Flash Actionscript settings. -> library path ->add the path till sdk
Configure globalplayer.swc. in Flash
in Common-Configuration/Player created a copy of FlashPlayer10_3.xml to FlashPlayer11.xml.
<player id="FlashPlayer11" version="12" asversion="3">
<name>Flash Player 11</name>
Finally
Flash Actionscript settings. -> library path ->add path till globalplayer
it work for me. ( tell me if I done wrong please). -
Getting Error 'Root XML Node nqw not found in island!'
I have upgraded my setup from OBIEE 11.1.1.5.0 to 11.1.1.5.1 and then uploaded a catalog created in older version, 11g itself.
I'm able to run the dashboards and see all reports. They run absolutely fine, show all correct data.
However if I try to edit report or try to open them in Answers module .... from anywhere (Catalog Link/ Edit option below reports in Dashboard) it gives me this error.
" Root XML Node nqw not found in island! "
It's strange. I tried following:
1. doing a Upgrade of catalog by setting up parameter in instanceconfig.xml file
<Catalog>
<UpgradeAndExit>true</UpgradeAndExit>
</Catalog>
and then reverting back to false.
2. Also tried the GUID upgarde by setting parameters in instanceconfig.xml file and NQSConfig.ini file
none helped.
Any help?Hi Naresh,
I hope you have resolved the issue by this time.
In my case, it was related to an invalid filter on the report.
I have removed the filter by updating the report .xml file from Catalog Manager.
Hope this helps other with similar issue.
Thanks,
Ravi -
Why do I keep getting Error 2 Apple Application Support not found
I KEEP GETTING ERROR 2 PLEASE UNINSTALL AND REINSTALL IN WHICH I DID BUT GET THE SAME MESSAGE. I'M USING WINDOWS 7
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Installation Error - SAP Unicode RFC Library Not Found
Out of approxoimately two dozen successful client installations of the BObj Integration Kit for SAP Solutions (SP2), I have one user who gets this error: "The SAP Unicode RFC Library could not be found. This library is available as a part of the SAP Frontend, which is a pre-requisite for the installation of this software. Please install 'Unicode RFC Libraries' feature in SAP GUI Installer 710 installer, then re-run this setup."
The problem is that this user is running the exact same Integration Kit installation on top of the the exact same SAPGUI installation that has generated successful results for all other client installs on our team. Why would this probelm be happening for one particular user? (Problem is happening on a Windows XP client system, but as I've mentioned, all other installs on a Windows XP client have been fine.)
I've reviewed OSS Note 1372466, but it indicates that the problem resides on the SAPGUI server side. Regardless, I have only one client generating this error out of many what appeared to be identical clients that installed successfully.
Any ideas would be much appreciated.
Thanks,
JoshThanks, Ingo. A missing librfc32u.dll file seemed to be the problem. Interestingly, the problematic client had this dll in a couple of places, but not in the c:\WINDOWS\System32 directory. Why that dll wasn't in the right place for one particular client is a question for a different forum.
Thanks,
Josh -
Reloaded I Tunes get error mesasage digital product id not found
i had to do a sys restore on my comp..when i went to reload I Tunes i keep getting a microsoft error message and I Tunes won't load...when i original got the IPod nano the programs loaded ok...i need help or this ipod is useless
top fixes for a new iTunes install/upgrade are
- turning off security software such as Norton before the install as Apple suggests
- installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
- setting up Norton to allow iTunes
- scanning for malware with ewido (Free at www.ewido.net/en/)
- last but not least, using MSCONFIG to find Windows conflicts
http://docs.info.apple.com/article.html?artnum=302538
Post back with any questions or your solution. -
Some sites worse than others. Seems to be triggered to adds loading as sites load. Must close error multiple times as pages load to continue to load the page. This is becoming real annoying.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
Struts2 and Tiles2 - Error executing tag: Attribute 'title' not found.
I keep getting Error executing tag: Attribute 'title' not found when I go to the baseLayout.jsp page. I am figuring it is not seeing the tiles.xml file, but I have placed it in the /WEB-INF directory like every web page I have found says too. Any help or pointers would be appreciated.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: javax.servlet.ServletException: javax.servlet.jsp.JspException: Error executing tag: Attribute 'title' not found.
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:491)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:401)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:389)I am using maven to load my dependency, so here are the version numbers.
<dependency>
<groupId>org.apache.struts</groupId>
<artifactId>struts2-core</artifactId>
<version>2.2.1</version>
</dependency>
<dependency>
<groupId>org.apache.struts</groupId>
<artifactId>struts2-tiles-plugin</artifactId>
<version>2.2.1</version>
</dependency>
<dependency>
<groupId>log4j</groupId>
<artifactId>log4j</artifactId>
<version>1.2.16</version>
</dependency>
<dependency>
<groupId>jboss</groupId>
<artifactId>javassist</artifactId>
<version>3.1</version>
</dependency>Struts.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts PUBLIC
"-//Apache Software Foundation//DTD Struts Configuration 2.0//EN"
"http://struts.apache.org/dtds/struts-2.0.dtd">
<struts>
<constant name="struts.enable.DynamicMethodInvocation"
value="false" />
<constant name="struts.devMode" value="false" />
<constant name="struts.custom.i18n.resources"
value="forum" />
<package name="default" namespace="/" extends="struts-default">
<result-types>
<result-type name="tiles" class="org.apache.struts2.views.tiles.TilesResult" />
</result-types>
<action name="login" class="net.game_tech.LoginAction">
<result name="success" type="tiles">/login.success.tiles</result>
<result name="error" type="tiles">/login.tiles</result>
</action>
<action name="login-form">
<result name="success" type="tiles">/login.tiles</result>
</action>
</package>
</struts>web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
id="WebApp_ID" version="2.5">
<display-name>Forum</display-name>
<listener>
<listener-class>
org.apache.struts2.tiles.StrutsTilesListener
</listener-class>
</listener>
<context-param>
<param-name>tilesDefinitions</param-name>
<param-value>/WEB-INF/tiles.xml</param-value>
</context-param>
<filter>
<filter-name>struts2</filter-name>
<filter-class>
org.apache.struts2.dispatcher.FilterDispatcher
</filter-class>
</filter>
<filter-mapping>
<filter-name>struts2</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<resource-ref>
<description>Mysql Forum</description>
<res-ref-name>jdbc/Forum</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
</web-app>tiles.xml
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE tiles-definitions PUBLIC
"-//Apache Software Foundation//DTD Tiles Configuration 2.0//EN"
"http://tiles.apache.org/dtds/tiles-config_2_0.dtd">
<tiles-definitions>
<definition name="baseLayout" template="/baseLayout.jsp">
<put-attribute name="title" value="Simple Java Forums" />
<put-attribute name="header" value="/common/Header.jsp" />
<put-attribute name="menu" value="/common/MenuNav.jsp" />
<put-attribute name="body" value="" />
<put-attribute name="footer" value="/common/Footer.jsp" />
</definition>
<definition name="/login.tiles" extends="baseLayout">
<put-attribute name="header" value="/pvt/Login.jsp" />
</definition>
<definition name="/login.success.tiles" extends="baseLayout">
<put-attribute name="header" value="/pvt/Welcome.jsp" />
</definition>
</tiles-definitions>baseLayout.jsp
<%@ taglib uri="http://tiles.apache.org/tags-tiles" prefix="tiles"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title><tiles:insertAttribute name="title" /></title>
<link href="css/main.css" rel="stylesheet" type="text/css" media="all"/>
</head>
<body>
<div id="page">
<tiles:insertAttribute name="header" />
<tiles:insertAttribute name="menu" />
<tiles:insertAttribute name="body" />
<tiles:insertAttribute name="footer" />
</div>
</body>
</html>I was playing around with it some more and was trying to follow this page:
http://www.vaannila.com/struts-2/struts-2-example/struts-2-tiles-example-1.html
I made sure I had the same jar versions. I still get the same exception in the Browser, but I get a few more log messages in the tomcat log;
Obviously I have something configured wrong. I'll see what searching brings up, and of course any help would be appreciated.
2010-08-24 10:30:59,885 DEBUG com.opensymphony.xwork2.config.ConfigurationManager.debug:57 - Checking ConfigurationProviders for reload.
2010-08-24 10:30:59,920 DEBUG com.opensymphony.xwork2.conversion.impl.InstantiatingNullHandler.debug:57 - Entering nullPropertyValue [target=[com.opensymphony.xwork2.DefaultTextProvider@4ba76eff], property=struts]
2010-08-24 10:30:59,956 WARN com.opensymphony.xwork2.ognl.OgnlValueStack.warn:45 - Could not find property [struts.actionMapping]
2010-08-24 10:30:59,957 DEBUG com.opensymphony.xwork2.config.ConfigurationManager.debug:57 - Checking ConfigurationProviders for reload.
2010-08-24 10:30:59,967 DEBUG com.opensymphony.xwork2.config.ConfigurationManager.debug:57 - Checking ConfigurationProviders for reload.
2010-08-24 10:30:59,969 DEBUG com.opensymphony.xwork2.conversion.impl.InstantiatingNullHandler.debug:57 - Entering nullPropertyValue [target=[com.opensymphony.xwork2.DefaultTextProvider@4ba76eff], property=org]
2010-08-24 10:30:59,969 WARN com.opensymphony.xwork2.ognl.OgnlValueStack.warn:45 - Could not find property [org.apache.catalina.jsp_file]
2010-08-24 10:31:00,089 DEBUG com.opensymphony.xwork2.conversion.impl.InstantiatingNullHandler.debug:57 - Entering nullPropertyValue [target=[com.opensymphony.xwork2.DefaultTextProvider@4ba76eff], property=org]
2010-08-24 10:31:00,089 WARN com.opensymphony.xwork2.ognl.OgnlValueStack.warn:45 - Could not find property [org.apache.tiles.servlet.context.ServletTilesRequestContext.CURRENT_CONTAINER_KEY]
2010-08-24 10:31:00,099 DEBUG com.opensymphony.xwork2.conversion.impl.InstantiatingNullHandler.debug:57 - Entering nullPropertyValue [target=[com.opensymphony.xwork2.DefaultTextProvider@4ba76eff], property=org]
2010-08-24 10:31:00,100 WARN com.opensymphony.xwork2.ognl.OgnlValueStack.warn:45 - Could not find property [org.apache.tiles.AttributeContext.STACK]
2010-08-24 10:31:00,100 DEBUG com.opensymphony.xwork2.conversion.impl.InstantiatingNullHandler.debug:57 - Entering nullPropertyValue [target=[com.opensymphony.xwork2.DefaultTextProvider@4ba76eff], property=org]
2010-08-24 10:31:00,100 WARN com.opensymphony.xwork2.ognl.OgnlValueStack.warn:45 - Could not find property [org.apache.tiles.AttributeContext.STACK]
Aug 24, 2010 10:31:00 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
org.apache.tiles.jsp.taglib.NoSuchAttributeException: Attribute 'title' not found.
Maybe you are looking for
-
Why can't I download apps without credit card
I can't download or update apps on my iPhone 6 Plus. I had a credit card set up to pay for apps and everything on my phone, but don't use that bank anymore. Where do I go to change my credit card info.
-
Hi I have two questions on restricted access of standard Tcodes. 1.Tcode F110: We are making payments to employee vendors and other vendors through F110 run.Issue is user who is running payment run for employee vendor group should not be able to run
-
Changing depths of movie clips
Hi Everyone, I have 8 square movie clips in two rows of 4, all on the same layer. When you click on them they become draggable. The problem is that, depending on where they are located within the layer, sometimes a dragging movie clip appears beneath
-
How can i get my pictures from the cloud if deleted from my Iphone
how can i get my pictures from the cloud if deleted from my Iphone?
-
No data in Multiprovider Query
Hi, I have a query defined on a Multiprovider. When i execute the query, i do not get any data. I checked both ODs on which this Multiprovider is built. Both the ODS have data. What could be the reason. Thanks.