Getting Error: Invalid configuration. Terminating the Palm Desktop when starting Palm Desktop 6.2 by Access

I have recently gotten the error noted in the subject line on my Tungsten E2 whenever I double-click the Palm Desktop icon.  Once I click the OK button I am returned to the desktop without entering the program.  I have installed the program and reinstalled the download from the Palm website several times (as recommended in a number of older posts) with the same results.  I have also checked to see that the User Account Control is turned on (which it is), as recommended in other older posts.
My workaround was simply to run the program as an administrator and I was able to successfully enter it.  In addition I had to manually create the user folder in the Palm Desktop folder.  Everything now works OK as long as I run the program as an administrator.
Has anyone found a solution that does not require running Palm Desktop as an administrator?
Post relates to: Tungsten E2

Delphi53
My experience with Palm leads me to believe that if you are running  Windows XP Pro (32 bit version), you should be able to use the older version 4.1.4 Palm Desktop.  See the link:  http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/37014_en.html
Try the above.
I used the above Palm Desktop on an older desktop PC I had that ran Windows XP Home.  The only reason I switched is that I began using a laptop that ran Vista which required Palm Desktop 6.
If however you are running a Windows XP Pro (64 bit version), you may need the Palm Desktop 6.2 that you already have (on this I am not sure).
Please note that the material I have mentioned is based upon my Tungsten E2 device.  If you have a different device take a look at the range of Palm Desktops available by device.  See the following link:  http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/33529_en.html
As far as User Account Control (UAC) is concerned it is more formalized with Vista, however a form is available under XP. 
See the following link:  http://blogs.techrepublic.com.com/window-on-windows/?p=509  Note you will have to setup a separate administrator level user on your PC.
I hope this was helpful.

Similar Messages

  • Error: Invalid Configuration Terminating the Palm Desktop

    I run Windows Vista and I have a Zire 22.  Norton was running this afternoon and telling me that I was running out of on line back up storage so I cleaned out some files and I thought I had just deleted some junk but now, when I try to launch Palm, I get "Error: Invalid Configuration Teminating Palm Desktop".
    How do I fix this please ?  Thanks.
    Post relates to: Palm Z22

    You have to reinstall the palm desktop. Here is the link http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/solutions/article/32859_en.html where you can download the 6.2 version.

  • Error: Invalid configuration for the JMS adapter

    Hi!
    I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
    <BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
    Teste.context.xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:osgi="http://www.springframework.org/schema/osgi"
    xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
    xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/osgi
    http://www.springframework.org/schema/osgi/spring-osgi.xsd
    http://www.bea.com/ns/wlevs/spring
    http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
    http://www.oracle.com/ns/ocep/jdbc
    http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
    http://www.oracle.com/ns/ocep/spatial
    http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
         <wlevs:event-type-repository>
              <wlevs:event-type type-name="Pet">
                   <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
              </wlevs:event-type>
         </wlevs:event-type-repository>
         <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
              <wlevs:listener ref="pet_inputChannel" />
              <wlevs:instance-property name="converterBean"
                   ref="PetMessageConverter" />
         </wlevs:adapter>
         <wlevs:channel id="pet_inputChannel" event-type="Pet">
              <wlevs:listener ref="pet_messageProcessor" />
         </wlevs:channel>
         <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
         <bean id="PetBean" class="testewithprotobuf.PetBean" />
         <wlevs:processor id="pet_messageProcessor">
              <wlevs:listener ref="pet_outputChannel" />          
         </wlevs:processor>
         <wlevs:channel id="pet_outputChannel" event-type="Pet">
              <wlevs:listener ref="PetBean" />
         </wlevs:channel>
    </beans>
    My converter class:
    import java.util.Collections;
    import java.util.List;
    import javax.jms.BytesMessage;
    import javax.jms.JMSException;
    import javax.jms.Message;
    import testewithprotobuf.MyPet.Pet;
    import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
    import com.bea.wlevs.adapters.jms.api.MessageConverterException;
    import com.google.protobuf.InvalidProtocolBufferException;
    public class PetMessageConverter implements InboundMessageConverter {
         @SuppressWarnings("rawtypes")
         @Override
         public List convert(Message message) throws MessageConverterException,
                                                                JMSException {
              BytesMessage bytesMessage = (BytesMessage) message;
              long bodyLen = bytesMessage.getBodyLength();
              byte[] buffer = new byte[(int) bodyLen];
              bytesMessage.readBytes(buffer);
              try {
                   Pet pet = Pet.parseFrom(buffer);               
                   return Collections.singletonList(pet);
              } catch (InvalidProtocolBufferException e) {
                   throw new MessageConverterException(e);
    Please, what's wrong?
    Thanks!

    This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

  • Palm OS - Error : Invalid Configuration. Terminating the Palm Desktop

    Hello,
    I am getting this error when i run the Palm OS Desktop, Error: Invalid Configuration. Terminating the Palm Desktop. This is what we did before we start receiving the issue.
    Change the computer for the user from domain1 to domain2. I have also copied all the Desktop and My document folders.
    Please let me know how to resolve this issue. The user has already lost her stuff from the device and she says she has all the updated stuff on her computer and now she is not able to use it.
    Thanks
    JH
    Post relates to: Tungsten E

    You have to reinstall the palm desktop. Here is the link http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/solutions/article/32859_en.html where you can download the 6.2 version.

  • Invalid configuration/terminated palm desktop

    when i click on the icon to my palm desktop, i get this message
    "invalid configuration. terminating palm desktop"
    how do i get it working again?
    Post relates to: Palm Vx

    try to see if what are the options under compatibility mode.
    if it is unchecked right, it's grayed out so just check the box for compatibility mode.
    once it's enable try to check what are options.
    Post relates to: Treo 680 (Unlocked GSM)

  • Installing CF10, in Configuration and Settings Migration Wizard - getting error: Invalid Password

    Installing CF10, in Configuration and Settings Migration Wizard, in browserhttp://127.0.0.1/CFIDE/administrator/enter.cfm,
    ColdFusion has been successfully installed. This wizard will guide you through the remaining server configuration steps and, if applicable, migrate settings from a previous version of ColdFusion.
    To guarantee the security of your server, please enter your ColdFusion Administrator password.
    - getting error: Invalid Password. It won't take the password I provided in previous "Set Admin password" screen. Help?

    Hi,
    I am having the issue with the URL on the Configuration ans Setting Migration Wizard pointing to the following URL:
    http://localhost/CFIDE/administrator/enter.cfm
    Receiving a message:
    HTTP Error 404.0 - Not Found
    The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
    The following is the information in the error page:
    Module
    IIS Web Core
    Notification
    MapRequestHandler
    Handler
    ISAPI-dll
    Error Code
    0x80070002
    Requested URL
    http://localhost:80/jakarta/isapi_redirect.dll
    Physical Path
    D:\ColdFusion10\cfusion\wwwroot\jakarta\isapi_redirect.dll
    Logon Method
    Anonymous
    Logon User
    Anonymous
    I could not find a directory called jakarta.
    Any ideas?
    Thanks,
    Mike

  • Getting error while configuring WAS 7 Fix Pack 37 with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0)

    Hi,
    I have installed Oracle Unified Directory 11.1.2.2.0 and WebSphere Application Server 7 with Fix Pack 37.
    I am getting error while configuring WAS 7 Fix Pack 37 (7.0.0.37) with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0). While adding products to cell (Oracle Directory Services Manager for WebSphere - 11.1.2.2.0), I am getting below error:
    CFGFWK-64069: The following prerequisites were found to be missing: Oracle WebCenter Composer Extension - 11.1.1.0
    Also attached the screenshot of the error.
    Please help.
    Thanks,
    Himanshu Verma

    Hello,
    ODSM has the following dependencies apart from ADF (both components depend also on ADF):
    - UIShell (oracle.idm.uishell.war)
    - Webcenter Composer (oracle.webcenter.composer.war).
    Apparently the composer is missing.
    Important points to check when using ODSM with WAS:
    - To install and configure Oracle Fusion Middleware with IBM WebSphere, you must first install (but not configure) IBM WebSphere
    - You must install the Oracle Application Development Framework as the same user who installed Oracle Unified Directory.
    - appdev must be installed under the same ORACLE_HOME as OUD
    Sylvain
    Please mark this response as correct or helpful when appropriate to make it easier for others to find it

  • Oracle sys Index rebuild then Getting error Invalid Error Ora-01410

    Oracle sys Index rebuild,
    after Getting error Invalid Error Ora-01410 in alert log file.every Insert ,update and delete.
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    PL/SQL Release 11.1.0.7.0 - Production
    Oracle sys Index rebuild list
    CTXSYS
    EXFSYS
    FLOWS_030000
    FLOWS_FILES
    MDSYS
    OLAPSYS
    ORDSYS
    OWBSYS
    SI_INFORMTN_SCHEMA
    TSMSYS
    WKSYS
    MDSYS
    After rebuild above index im getting error while inserting,update,delete table rows
    Error like 'INVALID ROWID' alert log file
    ANY ONE HELP ME TO RESOLVE THE PROBLEM
    Edited by: 927230 on May 26, 2012 8:51 PM
    Edited by: 927230 on May 26, 2012 8:53 PM

    927230 wrote:
    Oracle sys Index rebuild after Getting error Invalid Error Ora-01410
    Oracle 11.1 version
    Oracle sys Index rebuild list
    CTXSYS
    EXFSYS
    FLOWS_030000
    FLOWS_FILES
    MDSYS
    OLAPSYS
    ORDSYS
    OWBSYS
    SI_INFORMTN_SCHEMA
    TSMSYS
    WKSYS
    MDSYS
    After rebuild above index im getting error while inserting,update,delete table rows
    Error like 'INVALID ROWID'
    ANY ONE HELP ME TO RESOLVE THE PROBLEMwhich came first the error or the rebuild?
    COPY & PASTE whole session & SQL so we can see exactly what you do & how Oracle responds
    post results from following SQL below
    SELECT * FROM V$VERSION

  • Error could not retrieve the virtual desktop template details

    Dear Sir&Madam 
    I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
    I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
    Best regards 
    Rawa Zangana

    Hi,
    Thank you for posting in Windows Server Forum.
    From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
    You can run the following command line:
    Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
    Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
    Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

    After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

    kristinaf333,
    Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
    KarenC_VZW
    Follow us on Twitter @VZWSupport

  • Getting as message that says"The folder "Desktop" could not be opened because you do not have sufficient access privileges". How can I get into this folder?

    Getting as message that says"The folder "Desktop" could not be opened because you do not have sufficient access privileges". How can I get into this folder?

    OPen your Users folder, Highlight the Desktop Folder, do a Get Info or CMD+i on it, see if it's locked or if you have Rights & Privileges at the bottom.

  • When I try to download iTunes, I get error message indicating that the download is for 32-bit, whereas I need 64-bit. How do I download 64-bit iTunes?

    When I try to download iTunes, I get error message indicating that the download program is for 32-bit, whereas I have 64-bit. How can I download 64-bit iTunes installer?

    What version of windows do you have ? 64 bit only exists for Vista and Windows 7, not for XP (http://support.apple.com/kb/DL1047)

  • Get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    ''mbratlie [[#question-1055011|said]]''
    <blockquote>
    It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
    </blockquote>
    This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't.

  • Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
    Mylenium

  • While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?

    Hello,
    While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
    PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
    Message was edited by: Juan Verano

    Is there anything else beside the number 2203?
    Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/

Maybe you are looking for