Getting error like Information was stored in the source system

hai friends...
In Process chain, selecting particular info package delta and then selcting display messages am getting like...
"Information was stored in the source system"
data is not loading in to data targets....
Edited by: ganandkumar on Sep 15, 2010 10:24 AM

i am planning to load data in to PSA ...so i started and then it is showing like "
The last delta update was incorrect !
Therefore, no new delta update is possible.
You can cancel the request or:
Attempt to load the data of the last delta update again
so now i need to run this and i have to load data in PSA ...
suggest me friends...

Similar Messages

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

Error: Infoobject is not defined in the source system

hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanks

Thanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan

I get error "no content was found for the specified identifier of 10006715353

I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353

When you export your completed book , you wil see the saved file as .... xxxxxxxx.ibooks
A Preview is a sample of your book to allow potential buyer to check the content.
You can either duplicate your book, add PREVIEW to the file name ie PREVIEWmybook.iba.
This must have at least 15 pages. OR when you upload your book, you have an option to allow iTunesProducer to take a chapter as a preview and you can also select which chapter you want as a sample.
Tiffs are not suitable jpgs are.
Your original post says....I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353
If you do not know what an ibooks file or preview is... what were you trying to upload?
"Publishing to iBooks Author" You create books in iBA to "publish" to the iBook store via iTunesProducer.
Use this link for more information: http://support.apple.com/kb/PH12101 or this is the full list for you to study: http://www.apple.com/support/mac-apps/ibooksauthor/

Application log in the source system.

Hi,
I am trying to do the initialisation with data selection from R3 Source system into BW. Data was loaded but still the status showing Yellow and its giving the following messages.
Information was stored in the source system.
Diagnosis
The system has written an <b>application log</b> in the source system.
System response
No errors occurred.
Procedure
Check the log.
Procedure for System Administration
Can any body help me how to look the Application Log & the solution for the above problem.
Note : My PSA have all green records and it loaded 1176080 From 1176080 Records.
Points will be awarded.
Thanks,
Abhi.

Hi Abhi,
If BW tells you that no errors occurred it makes no sense to look into the application log. What helps however is to check if processes are still active for your load, e.g. ODS activation. You can check using tcode SM50 (in R/3 for e.g. user ALEREMOTE, in BW e.g. user BWREMOTE...can differ in your system).
Also check the Details tab in the monitor to see if all is green there (expand all nodes). Something might still be yellow so that's the step which is 'hanging'.
Hope it helps...
Grtx
Marco

InfoSource is not defined in the source system

Hi,
We are getting error 'InfoSource is not defined in the source system' while extracting data from Planning book to Cube in APO.
Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
Please help me.
Thanks
Subba Rao

Hello Subba,
Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
Best Regards,
Des

Getting error like thisThe import org.apache.poi cannot be resolved

Hi
i am new to this poi concept,i have downloded the pio 3.0 final from it.i have adde those plugind to eclipse then i have wrote a sample class form poi then ia m getting error like this .what might be the problem here.
can any one help me here
vijay

Hi guys,
u are right,
at last this problem is rectified here,what happend was i have copied jars from src not from poi 3.0.1-final-bin,here i have copied these jars here,
poi-3.0.1-FINAL-20070705,poi-contrib-3.0.1-FINAL-20070705,poi-scratchpad-3.0.1-FINAL-20070705.
now it is working here.i got the out put for the above code also.
so here my question is i have to pass this result to another class where it it reads only text ,for this i have used this concpet coz i have lot files other than text,how can i pass this to my class.
vijay

InfoSource 80FIAR_O03 is not defined in the source system

Hello,
I am facing one issue while running process chain in Test client.
Isssue: 0FI_AR_4 process chain loading to ODS successfull. the next step in process chain is further update. data is goint to cube. error getting u201CInfoSource 80FIAR_O03 is not defined in the source system.u201D i have replicated the DS and activated 3-4 times also ran progam also. but still getting same error message. i deleted data from cube. In productio its running fine.
currently client is updating ECC 6.0 system
what could be root cause?
Thanks in advance
CPY

Hi,
Can you please check this thread :
Re: InfoSource 80FIAR_O03 is not defined in the source system
Cheers,
Tanish.

Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22

Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process

Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

JohnCullison wrote:
For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command." error

I have an .XLSX File that I am trying to Upload into SQL Server. I use the Source as OLEDB Connection manager and pick OLDEB PROVIDER as MS OFFICE 12.0 ACCESS DATABASE ENGINE. In that I put this query but it gives the foll
error when I run the SSIS Package.
[OLE DB Source [1]] Error: No column information was returned by the SQL command.
Query I use in DATA FLOW TASK , IS SQL COMMAND:
Select top 1 [Investor #],[Investor Name], CONVERT (VARCHAR(1000),Delegation)AS DELEGATION ,[Date Added],[Date Revised] from [EXCELSHEET1$]
Any suggestion to fix this error? i have to do a convert since the excel datayype is DT_TEXT AND SQL TABLE DATATYPE is VARCHAR(1000) SO Have to do this Convert.

If the target table's column is not a BLOB/CLOB (e.g. NVARCHAR(MAX)) and you have text longer than the max value it will not fit into the target, if you are allowed you need to trim it and convert, otherwise sure you get the error as the target datatype
is smaller.
Arthur My Blog

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!

http://support.apple.com/kb/TS2690

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

Getting error like Information was stored in the source system

Similar Messages

Maybe you are looking for