Getting Error Message "Access Denied" and "Unable to Execute!

Using jmf-2_1_1e-windows-i586.exe on Windows XP. When I open the executable it prompts me if I want to overwrite the existing files. If I do yes, then I get "Access Denied". If I do no, then I get "Unable to Execute!
"C:\DOCUME~1\HP_ADM~1\LOCALSS~1\Temp\pft1~tmp\SETUP.EXE" /SMS
Unable to execute the command line"
What am I doing wrong?

Sounds like you don`t have write permissions for that directory. Not a java problem.
regards

Similar Messages

  • I'm trying to open a PDF file but keep getting error message "Access denied."  Help.

    Every time I try to open a PDF attached to an email I get the error message "Access denied."  How do I fix this?

    Actually my son directed me to a help site run by a guy named Brian Stevenson.  Here is what I did --
    1.  Launch Adobe Acrobat Reader XI
    2. Go to Edit>Preferences
    3.  Click on Security (Enhanced)
    4. Uncheck "Enable Protected Mode at startup"
    5. Click Yes when dialog box open to remind closing of application
    6. Click OK to save
    7. Exit Adobe Reader
    Worked like a charm!!

  • Keep getting error message access denied then already a project with that

    name saved.
    I don't understand why this is happening now, I have done this stuff many times before and NOW I am getting this message over and over! I am trying to start a new project and I keep getting that message. (it also says there is already a project using that name that I am trying to save it as. I have tried rebooting and shutting down FCE to no avail. I can't render anything because I guess I am NOT allowed access to my own project. Does anyone know how to resolve this? I have an external drive that my scratch settings are set to. They are still there and the message is STILL bouncing up.
    Thanks in advance
    ruez

    The other error message reads "there is already a project with that name", when I try to save it. Then it saves it as a copy, then the next time it is saved as a copy copy. I don't get it! I am doing just what I have always done and now this?
    When you say 'drives' what are you referring to exactly? How would I trash my preferences? Where would I check permission on my drives?
    Thanks Tom, as I am sitting here that little FCE icon is flashing me already to tell me Autosave: A file of this name already exists. When I click ok, Autosave comes back with access denied.
    Thanks for all your help!!
    ruez

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • Getting error-"Process Access denied" while invoking Process as web service

    Hi,
    I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
    Please help to solve the issue, as I need it urgently.
    Thanks,
    Sujata

    Hi Ariel,
    Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
    I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
    I tried to send correct authentication info in header. But still I am getting an exception.
    soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
    I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
    <soapenv:Header>
    <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
    <wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
    <wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
    </wsu:Timestamp>
    <wsse:UsernameToken>
    <wsse:Username>bpr_user</wsse:Username>
    <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    </soapenv:Header>
    <soapenv:Body>
    <sim:sayHello>
    <argInput>ss</argInput>
    </sim:sayHello>
    </soapenv:Body>
    </soapenv:Envelope>
    I cehcked with & without wsu:Timestamp. But same.....
    Please give your suggestion.
    Thanks
    Sujata

  • BSP Iview error message : Access denied

    Hi All,
    We are using E-rec 600 via the standard BSPs (REQ_MNT_LST) in ECC 6.0.
    The application runs fine in the browser without any problem.
    I started creating BSP iview in Portal for this application. The Url is mentioned below :
    http://hostname.companyname.com:8000/sap(bD1lbiZjPTIzNSZkPW1pbg==)/bc/bsp/sap/hrrcf_start_int/application.do?BspClient=235&BspLanguage=EN&rcfLogAppl=REQ_MNT_LST
    I have given the BSP iview properties for this application as follows :
    Application Namespace : rcfLogAppl=REQ_MNT_LST
    BSP Application : hrrcf_start_int
    Start page : application.do
    The application starts fine in Portal via BSP iview. But, however when I click on any of the drops in the application. In the status bar, it show the message : Access denied.
    I tried in other browsers also. Same problem persists. I am sure that the roles at backend and permissions in Portal are set properly.
    Please shade some light where I missed the steps. awaiting for your valuable inputs. thanks for your time, point assured.
    Kind Regards,
    Anil Kumar.

    portal being on https and abap server on http is not the issue here.
    the access denied error is a javascript error which will happen if the javascripts in the application tries to access js functions/dom elements from other frames or from other pages which are from different domains.
    this requires the domain to be relaxed and when supports portal integration flag is checked the system automatically generates code which handles domain relaxation. with this check box checked you should not be having problem.
    However i had the same problem even after setting portal integration flag. and my bsp application strucutre was on index.htm page and within that i had 4 frames. then i had to manually set the document.domain in index page which helped me to solve the access denied error.
    Regards
    Raja

  • With the latest Firefox, I keep getting error messages on Tumblr, and Flash Player crashes almost every time I watch a video on Tumblr.

    This has been driving me mad for days now. I updated to the latest version of Firefox, but every single time I go to any webpage on Tumblr, (my dashboard, my personal blog, anyone else's blog) I am bombarded by error messages saying "too much recursion." I usually get anywhere from 3 to 5 messages per page. I reverted to Firefox 34 and can now access Tumblr just fine, but then I am faced with a different problem. When watching videos or vines on Tumblr, they can spontaneously lag, jitter, or stop playing. If I try to resume playing them, then they might start playing but all audio will be cut out. This seems to cause some kind of problem with Flash Player, because after it happens on Tumblr, then it will happen on ANY video playing site I visit. If I try to watch a video on Youtube, the video will spasm for a couple seconds and then go to static and say "An error has occurred, please try again later." I've tested it out on other video sites like Blip, and they also cause audio and video bugs. Even if I close Firefox and restart it, the issue will not be solved. The only way I have found to fixing the crashes is to manually reinstall Flash Player (which requires me to reset Firefox anyway). This has been a tremendous annoyance, as I have had to reinstall Flash Player and reset Firefox about five times on any given day for the past week or so. This is driving me to consider dumping Firefox for Chrome, and I don't want to do that.

    Okay, I updated my graphics card drivers just for good measure. I also started Firefox in Safe Mode, and there weren't any bugs. So I isolated the problem by turning on my extensions one by one, and it turns out that something with my XKit extension was the cause. I manually removed XKit and reinstalled it directly from the XKit website. Now everything's working fine again when I use Firefox 35. Thank you!

  • Group Managed Service Accounts Error Message access denied

    Hi I am playing around with group managed service accounts in my lab using a 2012 R2 DC on a 2012 r2 forest and domain Level .Net 3.5 installed.
    I am following this tutorial
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    1. I installed the keys
    2. I waited for 10 hours
    3. I created the GMSA
    4. I tried to install the GMSA on the DC logged in as the Domain admin under a administrative powershell prompt
    5. I got the nasty error: access denied message.

    the powershell statement could be wrong...
    -PrincipalsAllowedToRetrieveManagedPassword

  • HT1926 just lost my itunes after doing a update. getting error message MSVCR80.dll and ERROR 7 (Windows error 126)I even tried to reinstall the whole program off from here. What happened? HELP!

    I tried to open my Itunes toady on my home computer. It said to update the library so I did. Now it wont open or anything. Tried reinstalling everything and get the error messages posted in the title above. Please Help. I have a lot tied into Itunes. Now when I check for updates it says everything is upt to date but when I try to open it i still get these two erroe messages.    MSVCR80.dll and ERROR 7 (Windows error 126)

    Hello berlinfire1979,
    The following article provides further information regarding this error, and steps that can help get iTunes working again.
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074
    Cheers,
    Allen

  • Getting error message file not found unable to sync to ipod

    90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

    +all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
    Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
    I suspect after itunes finds it again, it will load to your ipod.
    Is this music on an external HD?

  • Keep getting error message in ical and asks to go offline or revert to server.  help!!

    Everytime I go into ical to make an entry it comes up with an error message then to choose 'go offline' or 'revert to server'. 

    I did try the suggestion of deleting ical icon on the desk top and then add a new one and so far it has worked!!!
    Hope it works for you!

  • Officejet6​600 print perfect but I get error message when scanning and just idles when trying to copy

           Hello, I have an OfficeJet6600 printer and up until just yesterday this unit funtioned normally and had no trouble printing, scanning or copying from my computer.  Yesterday however I  found I could not scan and then worked with an HP support Rep on the phone regarding my HP OfficeJet6600 not scanning properly.  I am connecting to my printer wirelessly and have no issues printing.  However, I cannot scan and when I attempt to do so get a  scanner unreachable message.  The Rep deleted and reloaded every program and file associated with the printer and still the same result.  He advised me that the issue lies in my Windows 7 64bit OS and I might want to contact Microsoft support for a patch to fix the problem.  He also advised me to chat the forum as there may be a solution there that someone already optained from Microsoft.
            I starting looking through the forum this morning and came across some correspondence a Rep had with another customer and he advised the customer to check to see if the copy feature worked.  He stated that if it did not work either then more than likely it is a hardware problem and not a software problem.  At any rate, after reading that I tried to copy and sure enough the printer cannot complete that task either.  When you hit copy it say's copying on the printer screen but little icon beside copying  just spins forever and nothing happens.  You actually have power down the printer to get it to stop. Now I am confused.... Do I have a software or hardware issue?  

    Hello,
    After reading the problem description, i see that its a printer hardware issue. Its the scanning module that seems have an issue.
    The solution to this issue is Servicing the printer unless you have tried the below mentioned steps...
    While the printer is ON, unplug the power cord from back of the printer.
    Wait for 60 seconds.
    Plug in the power cord directly to a wall outlet ( bypass the surge protector / power strip ).
    If printer does  not power ON, then press the ON button to do so.
    When the printer goes silent, then try making a COPY.
    If issue still exists, then its time to service the printer.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Error Message access denied when trying to install on SD Card

    Hi,
    I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
    C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
    ive1 /SkipPlatformCheck
    Access is denied.
    Does anybody know a solution?

    Are you able to see the SD card in file explorer?  When you performed the diskpart command sequence:
    diskpart
    list disk
    exit
    Did your SD card show up as physicaldrive1?
    Is the SD card either 8 or 16 GB in size and Class 10?
    Also, are you running this command on a Windows 10 install?
    You might check that explorer or cmd don't have a reference to the SD card still.  If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

  • Since upgrading to new Firefox i get Error messages in Firefox and Thunderbird whenever I open a new tab: Type Error: classes (cid) is undefined or Components (cid) is undefined. How can I fix this? It shows up constantly.

    This "Type Error: classes (cid) is undefined" or this "Type Error: Components (cid) is undefined keeps popping up in a small pop up box every time I open a tab or switch from Thunderbird to Firefox to open a site,

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • In task mgr, AFP shows as "stopped". If I right click to start AFP, I get message Access Denied

    Windows 7
    Windows task manager, Adobe FP shows as stopped. When I right click to start service, I get error message Access Denied

    Sorry should be
    control alt delete
    task mgr
    services tab
    AFP  status  Stopped

Maybe you are looking for