Getting error message after formatting a new media on my Blackberry 9320

This happens everytime to me when I insert a new media card. I tried 5 brand new SanDisk SD cards. My BlackBerry tells me to format the media card and then a message pops up saying; "The media card you inserted contains errors".
After that, I repair it and format the media cards on my PC (Windows). The error message still pops up! It doesn't matter where I repair or format it, the problem just persists.

I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far.

Similar Messages

  • Get error message after trying all the fixes

    My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
    An unexpected error has occurred. Check OK to close program, and then try the following:
    --restart the program
    --restart the PC and then try again
    --reinstall the Photo and Imaging software and try again
    I tried all these - and downloaded new software after uninstall of old.
    Still getting error message -- any suggestions please?
    Thanks in advance.

    Hello golden1, and thanks for the reponse!
    I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred  which is found on http://hpanswers.blogspot.ca.
    Step 1:
    -In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
    Step 2:
    - In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
    - Go to Shell Hardware Detection, right click, and select properties.
    - Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
    - Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
    Step 3:
    If you if you are using downloaded software instead of the printer CD:
    -Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
    -Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
    -Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    If you are using the printer software disc, follow these steps instead of downloaded software:
    - Go to the Start menu, and go to Computer.
    - Double-click on the icon for the HP printer CD.
    - Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    Step  4:
    - Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
    Step 5:
    - Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred.  You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/produc​ts/features/system-restore
    If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Trying to update frpm itunes 10 to itunes11, but get error message after installation

    I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6.  I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6.  Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM.  I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone.  Help please

    First backup your music and content.
    Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
    Try and install 10.7 first iPhone 4s will work with this. You can find the download here
    http://support.apple.com/kb/DL1576
    Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
    From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

  • Help! Still get error message after installing new hard drive

    The original problem is below and thought that it would help to include it to see the initial problem.
    I went out and bought a new hard drive (500gb) and installed it in my laptop.  I went to use the restore disks and I got the same exact error mentioned below.  I used a set of disks that I copied from the original recovery disk and it still did the same.  What is the error code and how can I fix this!!
    Please help!!
    I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error:  ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
    Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message.  All the files are accesible on the CD and I have no virus' on my computer.
    Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer".  You can however see it when I go to "Administrative Tools-Computer Management."  It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

    Thanks for your quick reply!  I was wondering if anyone would reply!
    I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
    Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
    Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
    Thanks again for replying!

  • How do I stop getting error messages while creating a NEW iTunes account?

    I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
    Session Timeout. Your session has timed out. Please try this operation from the beginning.
    I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
    Thank you,
    sun_teacher

    See the thread here:
    http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
    We all had the same problem.

  • Getting error message after creating project ess~org from ESS track

    Hi All,
    Our basis team just now implemented the track for ESS and MSS.So we need to sync all application from DTR.
    We are facing problem with one Dc essOrg.I have created project essOrg from ESS track in inactive DC of development configuration.Build of DC is successful,where as in the Task tab its showing below error message:
    " Tree TreeCont [dataSource]: Context element and property are not compatible Orgchart.wdview     NWI_HR1_Dessorg~sap.com/src/packages/com/sap/xss/hr/org/chart  "
    I have done the follwing steps :
    1.I have close the project.Then remove it from client.Then close the NWDs and reopen it.Still the same error we are getting after creatig project from the track.
    2.Even we tried to repair the DC.Its asking for check out.Then after creating activity its showing an error pop up message "org.eclipse.jdt.core.JavaModelException: Classpath contains duplicate entry: D:Documents and settings/susmita.panigrahi/.dtc/2/DCs/sap.com/pcui_gp/xssfpm/_comp/gen/default/public/FloorplanManager/lib/java/sap.compcui_gpxssfpm~FloorplanManager.jar "
    3.I have open the OrgChart view of VcOrgChart Component in NWDs.I have found that the data source property of Tree node is showing red cross mark with name OrgTab(name of context node).I have tried to select another node also other than the context node OrgTab , getting message "Select an attribute of Type"
    Can any body tell me how to solve the error"Context element and property are not compatible " coming for DC ess~Org?
    Thanks
    Susmita

    If you have created other projects and they are working fine? Standard application should work without any modifications, so you may like to revert all the changes(before they cause further problem).
    Well you may like to clean up your directory , unless you have loads of application checked out.. Remove all applications from this particular Track, ensure that everytime you delete project from Studio , select to remove code from directory.
    This is likely that you are working on applications from two tracks, where version of FPM component is not the same. I always prefer to work one at a time, and i remove other track if i am done with application(This is lame way of handling it, but i prefer this.. saves loads of time to clean/repair)
    Also hope you are using compatible version of Studio.
    Rgds

  • Getting Error Message using Formatted Search

    Hi,
    I am using formatted search for validating a particular field, and that happens fine.  Kindly let me know if I can also display error messages using the same formatted search.
    If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
    Thanks in advance.
    Satish.

    Hi Satish,
    if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
    You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
    1. Solution
    You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
    Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
    Example:
    DECLARE @save AS ....
    SET @save = $[xxxxx]
    IF $[xxxxx] test on invalid data
      SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
    ELSE
      SELECT $[xxxxx] -- no error - sustain valid data
    END
    2. Solution:
    You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
    IF $[xxxxx] test on invalid data
      SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
    END
    May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
    Good luck!
    Frank Romeni

  • Getting error message after trying to correct for blank folio builder

    This is my first app using IDCC6. I opened the folio builder from the document, gave a name to the article that consisted of 12 picture panels (about 12mg) and tried to review on desktop but just got a blank folio builder screen. Then I updated to cc28 viewer, reset the ID prefs and restarted. Then I got an error message
    that said: "article <name> is not compatible with the viewer for which the folio is being published."
    Can someone tell me what I'm doing wrong here, other than perhaps being in the wrong forum. If so, pls let me know where i should post. I'm somewhat confused about naming articles. If that's the problem, I'd like to go into it...cheers all
    mac pro OS 10,5,8

    It's a good idea to check the Project Info (under the Project menu in iDVD) before burning a disc. If any of the Duration bars are in the red, then you need to go back and edit your project. Also check the Encoding type with your total Project Duration: if the project total is under 60 minutes choose "Best Performance;" if it is between 60 and 120 minutes you'll need to select "Best Quality."
    Unless you have freed a lot of GB on your hard drive, iDVD will not be able to burn the disc. You'll need at least 15 -25 GB free on your boot drive in order for the app to do all that encoding. It takes a lot of brainwork to turn a 13+ GB movie project into a 4GB DVD file.
    When your project is ready to burn, choose File > Save as Disc Image. This tells iDVD to do all the encoding, and will result in a disc image file that you can mount in your DVD Player app to see that all is well. If so, you can quickly burn the disc image with Disc Utility or an app like Toast. If not, then you haven't burned any coasters. Another advantage is that you will be able to burn duplicates of the disc image very quickly, without going through all that encoding again, should other relatives request a copy.
    Regards.

  • Get error message after accepting credit card details

    Hello, I am signing up for free trial of Windows Azure, after my credit card details were accepted, the following message was pop-up after I finalize the registration. Anyone know why?
    "Sorry! We could not complete the transaction using this payment method. Please contact support."

    Hi,
    Thanks for your feedback!
    Because this issue is more secret, we can't get detail information and give useful advise to you, I would like to suggest you to try the one that mentioned by Tabrez at: 
    http://social.msdn.microsoft.com/Forums/en-US/7a2acffb-6419-4a3d-8fb4-c8258790a2bb/why-cant-i-sign-up-for-the-1month-free-trial
    [quote]
    Contact support here:  
    https://support.microsoft.com/oas/?prid=14238.
    -tm
    [/quote]
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Current version of Flash CC installed, but getting error message asking for a newer version?

    With the latest download of Flash Professional CC, I'm trying to install the toolkit for CreateJS but getting the following error:
    "this extension can not be installed, it requires Flash version in range of inclusively between 12 and 12"
    I have installed all the current versions of Flash Professional CC, Adobe Extension Manager CC and the CC itself. Restarted the computer and installed all updates that it found. I have the most current versions of the applications, but I'm still getting the above error - what can I do?
    Thanks for your help!

    Flash Pro CC is version 13. It appears to need Flash CS6 to function. If you have CC then CS6 is a download in your cloud membership.

  • Getting error message after installing 990fxa-GD80

    I get the following message:
    Posted April 27, 2013 at 2:47PM
    EFI Shell Version 2.31 [4.633] Current running mode 1.1.2
    Map: Cannot find required ma name
    Press Esc in 5 seconds to skip startup.nsh, any other key to continue
    shell>

    >>Posting Guide<<
    Did you set boot priority?

  • Getting error message after building a game.. help please?

    I summed up my problem in the topic summary, I have been
    following a flash gaming tutorial and this is what I get
    1026:constructor functions must be instance methods
    Can someone explain what that means? I also will provide you
    with the code if asked :)

    I believe this is a licensing error.
    I don't think you can run Elements from an external hard drive. I'm pretty sure it has to be on the internal hard drive since the two allowable activations are tied to specific computers. Be aware you can only have it on two computers...activated...at one time. If you need it on a third, you'll have to deactivate it one one of the others before it'll let you use it.

  • Why am i getting error messages after I installed the latest update?  I am running Windows 7 and now getting error 7 .  It tells me to reinstall I tunes which didn't help

    Help please

    Hello mamdonde,
    The following article provides steps that can help resolve this error.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • HT1925 I am unable to start my Itunes and keep getting error messages after an update faiked to load correctly.  I have uninstalled and reinstalled it still getting these messages.  Please Help.

    I am not able to load I Tunes.....I attempted to uograde and now am unable to start Itunes....I uninstalled it and reinstalled no luck. HELP?

    Follow the below procedure if you are using a Windows based PC.   I did not develop it, another forum user did, but I did insert 1 additional step in case you use a 3rd party software package to give your apple devices "Airprint" capability for your non Air Print capable printers (Such as Fingerprint).
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    Remove any 3rd party software which uses Airprint features (such as Fingerprint by Collobos)
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8

  • Keep getting an error message after signing in when trying to buy a song

    keep getting error message after a login and try to buy a song 'we could not complete your itunes request an unknown error occured 9808'- thought maybe it was my p/w but have reset this-is there something wrong its been 2 days now.

    Or contact Adobe Customer Service via http://helpx.adobe.com/contact.html?product=export-pdf

Maybe you are looking for