Getting error message after trying to correct for blank folio builder

This is my first app using IDCC6. I opened the folio builder from the document, gave a name to the article that consisted of 12 picture panels (about 12mg) and tried to review on desktop but just got a blank folio builder screen. Then I updated to cc28 viewer, reset the ID prefs and restarted. Then I got an error message
that said: "article <name> is not compatible with the viewer for which the folio is being published."
Can someone tell me what I'm doing wrong here, other than perhaps being in the wrong forum. If so, pls let me know where i should post. I'm somewhat confused about naming articles. If that's the problem, I'd like to go into it...cheers all
mac pro OS 10,5,8

It's a good idea to check the Project Info (under the Project menu in iDVD) before burning a disc. If any of the Duration bars are in the red, then you need to go back and edit your project. Also check the Encoding type with your total Project Duration: if the project total is under 60 minutes choose "Best Performance;" if it is between 60 and 120 minutes you'll need to select "Best Quality."
Unless you have freed a lot of GB on your hard drive, iDVD will not be able to burn the disc. You'll need at least 15 -25 GB free on your boot drive in order for the app to do all that encoding. It takes a lot of brainwork to turn a 13+ GB movie project into a 4GB DVD file.
When your project is ready to burn, choose File > Save as Disc Image. This tells iDVD to do all the encoding, and will result in a disc image file that you can mount in your DVD Player app to see that all is well. If so, you can quickly burn the disc image with Disc Utility or an app like Toast. If not, then you haven't burned any coasters. Another advantage is that you will be able to burn duplicates of the disc image very quickly, without going through all that encoding again, should other relatives request a copy.
Regards.

Similar Messages

  • Get error message after trying all the fixes

    My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
    An unexpected error has occurred. Check OK to close program, and then try the following:
    --restart the program
    --restart the PC and then try again
    --reinstall the Photo and Imaging software and try again
    I tried all these - and downloaded new software after uninstall of old.
    Still getting error message -- any suggestions please?
    Thanks in advance.

    Hello golden1, and thanks for the reponse!
    I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred  which is found on http://hpanswers.blogspot.ca.
    Step 1:
    -In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
    Step 2:
    - In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
    - Go to Shell Hardware Detection, right click, and select properties.
    - Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
    - Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
    Step 3:
    If you if you are using downloaded software instead of the printer CD:
    -Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
    -Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
    -Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    If you are using the printer software disc, follow these steps instead of downloaded software:
    - Go to the Start menu, and go to Computer.
    - Double-click on the icon for the HP printer CD.
    - Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    Step  4:
    - Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
    Step 5:
    - Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred.  You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/produc​ts/features/system-restore
    If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • Get error message when trying to install windows. need to remort hd. how to

    tried to install xp with bootcamp. get error message when trying to partion the disk:"the disk can not be partioned because some files cannot be moved.
    back up the disk and use Disk Utility to format it as a single Mac OS Extended
    (Journaled) volume. Restore your information to the disk and try using Boot Camp
    Assistant again."
    bought an external hd and used time machine to back up everything. do not understand how to reformat the hd with disk utilities. any help is appreciated

    Hi and welcome to Discussions,
    have a look at the answers in this thread http://discussions.apple.com/thread.jspa?threadID=1972468&start=0&tstart=0 for an easier way to do this.
    Regards
    Stefan
    Message was edited by: Fortuny

  • Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Keep Getting Error Message When Trying to Upgrade

    I have tried to upgrade several times it goes all the way through and then it gives an error message after trying to upgrade quicktime error message 2378

    +error message 2378+
    That typically indicates a problem with your VBScript. See the following troubleshooting article:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
    (The Vista instructions are down at the bottom of the document.)

  • TS1538 hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....pleas

    hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help

    https://discussions.apple.com/message/23100453#23100453
    more hits from the search
    https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

  • Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Make the reservation by phone. 

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • Get error message when trying to launch bridge from CC 64 bit.

    Get error message when trying to launch Bridge from Photoshop CC 64 bit.  "Cannot complete command because extension cannot be loaded."  Need fix.  Thanks.

    Hi Adobe Bubba,
    Please uninstall the software, run the cleaner tool, restart your machine and install again.
    Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
    Regards,
    Romt Sinha

  • I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

    I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

    It sounds as if your browser and some of your apps are not color-managed.  This is pretty typical.  Even IE9 is only partially color-managed.
    You can expect color-managed and non-color-managed applications to show you different things with the same images.  How different will depend upon how different your monitor color profile is from the image's color profile.
    For web publication and most general use, experts usually advise saving images with the sRGB profile.  If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
    You should really try to get your head around color-management by reading more on it.  It can seem baffling and it's difficult to understand without some background.  A quick web search turns up many overviews.  Beware, though, even people writing articles sometimes don't fully understand it.
    -Noel

  • HT5731 Have 55GB available, but get error message when trying to download movie to add storage

    Have 55GB available, but get error message when trying to download movie to add storage

    Go to Settings>General>Usage>Storage. Let all of the apps load in the window. You can see how much storage you have used and how much you have left. You will need about twice the size of the download of free storage in order to be able to download the movie. Also, the iOS will not let you use every bit of available storage on the device.
    You can delete content in there if needed, but if you sync with iTunes it's a good idea to transfer purchased into iTunes and backup your iPad before you delete content. If you use iCloud only, backup with iCloud before you delete any content.
    How to transfer purchases into your iTunes library
    http://support.apple.com/kb/HT1848
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

  • Keep getting error message "user name or password for aol is incorrect". I have reset both username and password and still can't get my mail.  This problem only seems to exist in the evening.

    Keep getting error message "user name or password for aol is incorrect
    ". Have reset both and problem still exists.  Problem appears to be in the evening hours only.

    reset the password to re confirm that that isn't the issue

  • Trying to update frpm itunes 10 to itunes11, but get error message after installation

    I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6.  I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6.  Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM.  I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone.  Help please

    First backup your music and content.
    Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
    Try and install 10.7 first iPhone 4s will work with this. You can find the download here
    http://support.apple.com/kb/DL1576
    Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
    From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

  • I keep getting error message when trying to sign in for iMessage with my Apple ID since upgrading to iOS 7

    I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.

    After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.

Maybe you are looking for

  • AIR-SAP1602E-E-K9 In Hypterminal

    hi all, was configuring this AP platform. after AP boots up it got stuck on this line: *Mar  1 00:03:09.978: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source i always use secure CRT but when i changed to hypterterminal i

  • Lion doesn't see my new wired keyboard.

    Have just installed 10.7 and updated it, since the keyboard "Getting Started" told me it needed 10.7 for optimum performance.  The OS is simply not recognizing the new keyboard and shows a bluetooth set up window instead that is searching for a wirel

  • One datapage updating two view objects

    Hi, I have three tables: trouble_tickets ticket_locations (intersection table with location_id and ticket_id columns) locations There is a many to many relationship between locations and trouble tickets. The customer wants one web page on which it ca

  • Change wav file names on iPod - unreadable

    Hi. I was asked to import some important imterviews made on an iPod mini and an ExtremeMac Micromemo onto a Mac, but, as requested, I change the file names first. Since changing the file names the files are completely unplayable, undownloadable and u

  • Keys in GeneratorText.properties not used !!!

    hi all, I found in GeneratorText.properties some keys ignored and are not used in the generation process like: NOT_NULL_VIOLATION, CHECK_CONSTRAINT_VIOLATION How can I generate these keys in the *.properties files to translate error messages? yours,