Getting error message for "user created how tos"  CS3

I tried to create some new How Tos in CS3 and recieved the following error message when I try to open it:
"The Adobe Help application could not load a URL because the specified file could not be found. You may need to re-install the application and the help component."
If I access one of the ones created with CS2 it opens (I dragged them over from CS2, I have since removed CS2 from this computer, it's still on my laptop) I haven't tried creating them and importing them to this computer).
I'm using Microsoft Office Word 2003 to save the How Tos as html files, and notepad to edit Add_001.howto file.
Since I gotten this error, I reloaded CS3 Design Standard, it didn't fix the problem. Also I have ensured that the Add_001.howto file points to the right location (C:\Program Files\Adobe\Adobe Photoshop CS3\Help\additional how to content)and is in the right format:
"John Shaws CS3" "47. A GLOSSARY OF IMAGING TERMS" 47.html (works).
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html (doesn't work)
The only thing new on the computer is a brand spanking new EVGA NVidia Geforce 9500GT PCI express(512 mb ddr2 dual DVI output) with the latest drivers. It replaced NVidia GeForce 6600GS and Matrox Millenium video cards (the Matrox). The new video card does not include some program that allows it to run MS-DOS programs, but I don't feel that is causing the problem.
System Info:
Photoshop CS3 10.0.1
Computer: Gateway DX310X with Gateway FPD1975W and FPD1730 monitors
Windows XP Media Center Edition, Service Pack 3
Intel Pentium D proccessor
1GB internal memory
168GB of free space on hard drive.
I hope I have given you suffiecient information to give me some possible solutions.
Thanks
Rick

Mylenium
Thanks for the assist.
It isn't a Windows Indexing Service problem.
It is an operator problem. As you pointed out the long name and spacing are the issue here.
I changed the the Add_001.howto file from:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html
to:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" NN001.html
I changed the file in the Additional How To Content folder, to match.
And it works now.
Now that I know what was wrong with my file names, I'll be able to get the various plugin help files/documents into Photoshop so I won't have to get out of it to get help on them.
Thanks
Rick

Similar Messages

  • My ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw

    my ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

    Error 1603
    Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW  in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    The above is from the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Get error messages for those procedures in some system tables

    Hi expert,
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    Many Thanks,

    >
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    >
    No - there is no system log table.
    You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
    The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
    See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
    Here is an Oracle-Base article that shows how to use the pragma to perform logging.
    http://www.oracle-base.com/articles/misc/autonomous-transactions.php

  • Get error message could not create library/application support

    get error message "could not create library/application support" when trying to install Creative Cloud.

    Check your user permissions on the Library folder.
    Mylenium

  • I am getting error message  for updating my I pad

    I am getting error message  for updating my I pad

    And what is the error message ? Are you on iTunes 10.5+ on your computer ? If you are getting a network timeout message then try temporarily turning off all your firewall and antivirus software until the download has completed.

  • Getting error message "Could not create work area" when I open Bridge CC.

    I am getting an error message "Could not create work area" when I open Bridge CC.
    I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
    I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

    I am experiencing the same problem!
    My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

  • I suddenly cannot open edit in elements 9  get error message 150.30.  How do I fix.

    For some reason edit in elements 9 will not open.  I get error message 150.30.  Anny suggestions as to a solution?
    Catholic1943

    What to do about Error 150.30?

  • Trapping and creating a nice error message for users

    i wanted to find out how I to create a coldfusion code similar to my asp code. i'm trying to learn coldfusion.
    This code traps the error and emails it to me, while showing the user a "friendly message"
    <!--#include virtual="Errorpage.asp"-->
    on error resume next
    if Err.number <> 0 then
      TrapError Err.description
    ON ERROR goto 0
    End If
    processerrors
    the error page sends me the message and contains a nice error message
    thanks

    There's an awful ot of good info there if one was to look for it by googling "coldfusion error handling".
    However the short version is:
    Site-wide error handler
    http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ffc .html#WSc3ff6d0ea77859461172e0811cbf3638e6-7ffb
    onerror:
    http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7d 4a.html
    cferror:
    http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7d 29.html
    Handling Errors:
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -7fc4.html
    Specifcally try/catch:
    http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7e c6.html
    Adam

  • How to get error message for VISA in CVI?

    Hi there,
      I was using labview 2012 to handle GBIP interface with VISA, the VISA write code will return an error cluster if exists. Recently, I switch to CVI and I use viWrite to write to the GBIP, but in this case, how can I get the error cluster?

    Erik-S wrote:
    Hi dragondriver,
    There is not an error cluster in CVI in the same way that there are error clusters in LabVIEW. A VISA function should output an integer if there is an error, but it will not include a string and a boolean like LabVIEW does. You can set up a function that acts like an error cluster by creating a struct that has the error integer, a string related to that integer, and a boolean. You would have to use the integer to look up the error string from a library. 
    -Erik S
    Thanks Erik. I found that when I operate the VISA, it actually return a number to tell success or failure only. I wonder how to extract the error message as string in CVI?

  • Customized Error Message for User

    What's your recommendation re displaying Customized User Error msg as opposed to the generic, techy #SQLERRM# ?
    How can one implement this ?
    How can one capture #SQLERRM# (or whatever), evaluate the ORA number and display a message grandmom can understand ?
    Please give an example if you can in the context of DELETE a record on P301 "Product Information" of the "Sample App"
    Thanks

    short of coding the dml procs yourself and trapping those error messages that way, i don't think we offer you a good way currently to trap and translate error messages coming out of our automatic DML processes. i've just logged the enhancement request to facilitate this, but for now i'm pretty sure you'd have to code that dml and trap your errs yourself.
    regards,
    raj

  • Error message for user (PO Release Stratregy)

    Dear friends,
    I have created PO release strategy. I want to show an error message like "You couldn't create PO. You dont have release strategy) ", If user doesn't have any strategy for current PO data. For this message Which user exit or Bapi can help me?
    Thanks

    How to control if current PO doesn't have any Release Strategies I want to show an error message. Which user exit or badi???
    Thanks

  • Error message for Users

    Hello all,
    My plan is to perform four hardware checks prior to the installation of some softare - the checks are:
    OS is at least Windows 7
    HDD Freespace is not less than 6.0 GB
    CPU is greater 4.00Ghz
    RAM is not less than 2.0 GB
    Scripting the above is pretty easy...but what I now want to do is capture any of the failed checks and report them to the user.
    E.g. one computer might fail HDD and RAM checks but another system may only fail on RAM - how can I dynamically build up a message to inform the user of the specific issue with their machine?
    It would be pretty easy to just pop-up some info to the user stating that their machine doesnt meet the minimum specs but I'd rather tell them more specifically what the issue is so the service desk don't have to connect and figure out which check
    or checks have failed....hope this makes sense?
    Thanks,
    C
    Carl Barrett | Twitter: @Mosquat

    multiple ways of handling this. one would be to define variables you set to true or false for the different conditions. after the checks, you build your error string depending on which variables are true or false and show it to the user.
    pseudo code like:
    $errorMessage = "Your system doen't meet the following minimum requirements: "
    if($yourRamCheck -eq $true)
    $errorMessage = $errorMessage + "System RAM below requirements"

  • Firefox 3.5.9 won't open even in safe mode i get error message ''mozilla crash reporter'' how do i fix this?

    i cant open firefox anymore! :( do i need to uninstall it?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; Media Center PC 2.8)

    i cant open firefox anymore! :( do i need to uninstall it?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; Media Center PC 2.8)

  • Getting error message for beta downloading cannot find archive files

    I downloaded firefox beta for my windows 7 ...after download was complete.. I clicked on run and a pop up stated" can not find archive file"

    Hi Jain,
    in portal go to content administrator>>in portal content>>content provided by sap>>platform add-ons>>
    business intelligence>>iviews>>right click on Bex web analyzer click on preview chekc from there is
    bex web analyzer is working
    and also double click on iview and check system is assigned or not
    hope this helps
    thanks
    kishore

  • Error message for export to PDF in CS3 after os upgrade

    I upgraded my Mac o/s to 10.6.8 -Snow Leopard - Now CS3 gives me an error when I try to export a file to PDF that says"PDF library failed to initialize" Adobe says that CS3 is compatible with snow leopard, but they don't troubleshoot CS3 anymore. Anybody have an idea on how to fix?

    Uninstall InDesign. Uninstaller should be in Applications > Utilities > Adobe Installers. Reinstall InDesign from your original media or your backup installer.

Maybe you are looking for

  • Sccm 2012 SP1 - Error 0x80070002 / 0x80004005

    Hello, First off all sorry for my bad english speaking ! I'll try to be as clear as possible :) I want to build an image from a basic win7 captured image (that part was already done) adding some apps in a first capture and next (if the first one want

  • Calibrating 24" alum iMac

    For those of you who have successfully calibrated your new 24" alum iMac, which calibration hardware / software did you use? I've seen spyder 2 mentioned, i1 mentioned and one other whose name escapes me. All are $300 or less, so that's not an issue

  • Diff in SAP ECC 6.0 and Netweaver

    Hi Experts, I am working as SAP ABAP Consultant. I am new to SAP Netweaver with JAVA. I want to Learn SAP with JAVA also. Can any one tell me whether the SAP 6.0 is used for SAP NetWeaver developement with java or it needs some more than SAP ECC 6.0

  • Writing function to print limited time

    Hai sir,this is surendra i developed a software for online examination i have problem with printing the limited time can yoiu give the code of th function to print the limited time from the bean

  • Is it possible to reference environment variables in the .properties files?

    Here's what I'd like to do- In the application.properties files, I tell OPA where the docgen server is via this setting: # Location of the Document Generation Server plugin.docgen.server.url=http://bipDev/document-generation-server/ Note that this is