Getting error message... Need help now..

I was using my powerbook g3 and all of a sudden i get a message pop up on the screen. It says: you need to restart your computer. Hold down the power button for several seconds or press the restart button.
I held down the power button for several seconds numerous times and it did nothing.
Then i pushed control-command-power buttons at same time and the computer restarts, just to the same spot, with the same message.
I even found the manual restart button on the back and got the same result.
Please help me. How do i get rid of this message and use my computer again? I have 3 sports pages to get done this weekend. I need my laptop to work.
I am running os 10.3.9
there is also a 9.2 os on computer as well.
Please help!!!!!

Robert:
You are likely experiencing what is called a kernel panic. These may be either hardware or software based. To shut down the computer hold down the Power button for about five seconds. You will find more about KPs and troubleshooting information in Dr. Smoke's FAQ Resolving Kernel Panics. If you are able to locate the crash log, please post the last one, as that may be helpful in pinpointing the cause of the issue.
cornelius

Similar Messages

Getting error message, need help

Hi there, at the moment I have the following query:
select cust_no, cust_address, cust_phoneno
from customer natural join (select cust_no from businesscust minus select cust_no from rental);
This query outputs perfectly fine, with no errors.
However, when I try to change the query to this:
select cust_no, cust_address, cust_phoneno, b.cust_businessname
from customer natural join (select cust_no from businesscust minus select cust_no from rental), businesscust b;
I keep getting an error. Can someone please tell me where I'm going wrong, and where I can fix it? THanx in advance.
Edited by: user12007308 on Oct 8, 2009 10:52 PM

Hi,
user12007308 wrote:
Hi there, at the moment I have the following query:
select cust_no, cust_address, cust_phoneno
from customer natural join (select cust_no from businesscust minus select cust_no from rental);
This query outputs perfectly fine, with no errors.
However, when I try to change the query to this:
select cust_no, cust_address, cust_phoneno, b.cust_businessname
from customer natural join (select cust_no from businesscust minus select cust_no from rental), businesscust b;
I keep getting an error. Can someone please tell me where I'm going wrong, and where I can fix it? THanx in advance.
Edited by: user12007308 on Oct 8, 2009 10:52 PMSurely, you must know more about the error than that you get one. Don't keep that information from the people who want to help you.
Do you get an error message? Post the complete message, including line numbers.
Are you getting the wrong results? Describe the results you're getting, and what you want. Better yet, post some sample data and the results you want from that data.
It looks like all you've changed is adding a new column to the SELECT clause, and cross-joining the businesscust table. That cross-join would probably produce lmany more rows of output than the original query.
I think you can get the cust_businessname from the same copy of businesscust that you're already joining.
Maybe something like this
select c.cust_no
,      c.cust_address
,      c.cust_phoneno
,     b.cust_businessname
from      customer      c
join      businesscust      b     ON b.cust_no     = c.cust_no
where     b.cust_no     NOT IN     (
                    SELECT     cust_no
                    FROM     rental
                    WHERE     cust_no     IS NOT NULL     -- Remove if impossible
;

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

Trying to burn a cd and getting error message 4260 help?

I am trying to burn a cd in ITunes and getting error message 4260 help please

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I cannot burn playlist itunes i keep on getting error message 2131 help please

i cannot burn playlist from itunes i keep getting error message 2131

Are your optical drivers up to date? Try updating the drivers, if that was the case in the Device Manager. Hope it works.

I cant access my bank account since having firfox always get error message and it now says retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 does anyone know what i need to change thanks

i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation

I keep getting "ViewNX Quit unexpectedly" Error Message Need Help

I keep getting this message can't open my view nx and get this huge list of "problem details and system configuration" Can someone please help. I'm using Snow leopard and 1.5.2 of viewnx.

JaequelineH,
That product is not an Apple product so you may also want to research with the manufacturer.
You can try some basic resets such as a SMC and PRAM reset but before doing that restart in Safe Mode, this will clear some caches. It is possible one has become corrupt. Please report back what happens after restarting in Safe Mode, then restarting normally and testing.

Cannot update to iTunes 8.2 - get error message, please help???

I have Windows Vista. When I try to update to iTunes 8.2 (which I need for the new iPhone 3Gs I bought yesterday), I get this error message:
"Errors Occurred while installing the updates. If the problem persists, choose 'Tools > Download Only' and try installing manually"
I've read a lot of the posts and tried 'repairing' the Apple Software Updater, and that doesn't work.
Can someone point me in the right direction?? Any help would be greatly appreciated!

I am in the same boat.
I originally had the same error. So I tried the following unsuccessfully:
- Download Only, several times and on 2 different computers, one with XP and one with Vista o/s
- Downloading from the Apple site, several times over the last 3-4 days and each time it gets to a different % downloaded and then stops and after a while returns an error.
- I've tried uninstalling iTunes and Quicktime
- I've tried clear the cache, delete all cookies etc.
I upgraded my phone using a friends computer and now I can't connect to iTunes at all as it is not compatible (and the computer I uninstalled it from I can't download it to reinstall.
Not sure what else to try. A friend warned me that iTunes was problematic and frustrating to use, but I bought an iPhone anyway and now understand what they mean!

Weird error message need help..

SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster

+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now?

IWeb Error Message - NEED HELP ASAP

I created a new site and I'm trying to publish it and continue to get the message:
"iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again."
I am connected to the internet via ethernet and I'm having no trouble with my connection but continue to get this error. Do you know a work around? Much appreciated if you do.

MobileMe live chat support is now 24/7 — see this announcement.

Internal Error message - Need help please

I have the administration aspect of my site done. It tests wonderfully on my testing server. Once I uploaded it to the web-server I get this error:
Error:
Internal error.
Developer Details:
tNG_update.getLocalRecordset:
Error message:
No database selected
SQL statement:
SELECT month,date,year,event,location,event_url,calendarID, calendarID as kt_pk_calendar FROM calendar WHERE calendarID =2 (UPD_RS)
tNG Execution Trace - VIEW
The only ADDT form that will work once posted to my web-server is the Dynamic Lists. So this is telling me that ADDT does not have a problem with my connection file. It's seeing the database.
The live site works great too so there's not an issue there.
I have uploaded the includes folder I don't know how many times.
Thanks,
Cheryl

-----
I thought maybe it was the site itself. Then I tried it with another site and the same problem
well, thanks for that info -- considering this I can´t help suspecting that your ADDT (or Dreamweaver) installation might be broken. For a start I suggest to uninstall/reinstall ADDT first and see if this solves your issues
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Error message - need help to fix

Hi there,
I have put a form on this page - https://ceressecure.worldsecuresystems.com/venue-hire/commkitchenbooking.html.
It was working fine for a time but now it is returning this error - ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page.
I have no idea how to fix/ debug it. Support said it was a js conflict issue but couldn't help me any more than that. If anyone can help or let me know what steps I could take to debug it that would be most appreciated.
Tom

Hi Tom,
Firstly, you have a few javasctipt errors on that site/page. It actually crashed chrome for me and would not finish loading the page. Worth fixing those up.
The ID's and names seem ok on the forms, the javascript is not kicking in due to the script errors you have hence the red line error message.
The web form ID in your form action, note that and in the admin click the form you have in the web forms. In the URL you will see the ID for the form there too. Are these the same? IF not then you have edited the form at some point and not using the correct form ID.

Why wont itunes download on my laptop running windows vista, keep getting error message 127, help

Why wont itunes download on my laptop running on windows vista, keep getting Windows error127, can anyone help please this is driving me insane, tried 9 times already without
success.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Why am i getting error message 2330 and now unable to open up itunes

i did the usual download of new stuff and after i had restarted i got this error message (after a wait while it "reconfigured" itunes for windows) - what a pain i can't even get into my itunes now at all
has anyone had experience with this?

Welcome to AD!
Have you seen this older topic about that error 2330?
http://discussions.apple.com/thread.jspa?messageID=8034941
Maybe it is the same solution for you.

HT3728 Backup stopped and error message-need help

My backup won't work and I get this message The backup disk image “/Volumes/Data/C......’s MacBook.sparsebundle” is already in use
Help is greatly appreciated! Thank you in advance!

Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back into the back of the Time Capsule
Wait for the Time Capsule to restart back to a green light
Try another backup. This simple reset will work 98% of the time
If no help, see this support document for more details:
The Backup disk image ... sparsebundle ... is already in use.

Error message; need help ASAP!

Hello,
I am on a G4 running System 10.4.11 and using Illustrator CS. I am currently working on a project and suddenly cannot open my file. I am getting the following error message:
Can't open the illustration. The illustration contains an incomplete or garbled object description. Offending operator: ";" Context: %2)[6",pbuU7L]~>
When I finished working on this file last night, it appeared to save successfully; it did not crash. I also copied it to my removable hard drive for my nightly back-up. That file has the same error message. However, both do preview when I click on them to open. Do I have any hope at all of opening this file again? My deadline will be in jeopardy if I have to start over.
Thanks in advance for any advice.

Have you tried "placing" the corrupt file into a new page yet set to the same size? This may work, good luck with it.
Jeff

Getting error message... Need help now..

Similar Messages

Maybe you are looking for