Getting Error Message on the MC84 transaction code MG144

The field is defined as a required field; it does not contain an entry ... Message no. MG144 ...
We are unable to get past the initial screen of the t-c mc84. getting the above error. The product group's material type is PROD. The only reqd entry in the screen is the base unit of measure which I am entering as EA (eaches)
We have included the views Basic Data1 & MRP1 for this material type.
I learnt that for mc84 to be successfull, no other views for the material/ prod-group shall contain any required entries. So I figured out some of the entries such as 'profit centre' and made it optional. However, I was not able to make the MRP-type as optional. someone suggested to remove the MRP view to eliminate the error.
Nothing is working, how to make the mc84 t-code work?

Dear Raghu,
Check these links,
how to create product group?error?
Product group error
If this does helps you means please revert back.
Regards
Mangalraj.S

Similar Messages

When synchig my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

I keep getting error messages on the calendar since downloading the new software on my IPAD2. It either says "cannont save event. That event does not belong to that event store" or I get an error message that says that no calendar "has been set".

I keep getting error messages on the calendar since I downloaded the new software on my IPAD2. When I try to add a new event it either says "That event does not belong to that event store" or it says "the calendar has not been set". Does anyone know what these messages mean or how to address this?

I'm getting the same issue on my ipad2...I set up a new calender and now I keep getting this error message....how do I fix this?

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am trying to download the latest iTunes update. Keep getting error message stating "The folder path 'My Documents' contains an invalid character". I can't uninstall iTunes for the same reason. HELP!

I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character". This also happens when I try to uninstall iTunes. HELP!

OK, never mind! I saw another question on the right side that addressed the problem, and it worked perfectly! Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes! This community is super!

I have air port express 802.11n and imac ver 10.7.5. When I try to set up my wifi I get error message 'that the version mac os x is not supported' Help?

I am trying to set up wifi using air port express 802.11n version 1.3 on my imac os x ver 10.7.5. Get error message Air port can't be installed on this disk that the ver of mac not supported - Help????

Please check the model number on the side of the AirPort Express in the faint print. It will start with an "A" followed by four numbers, as in A x x x x.
Post back with your findings.

Trying to uninstall and reinstall iTunes on Windows 7, but half way through getting error message saying the older version could not be removed. I have uninstalled everything that goes along with it

I also get a message saying:
the feature you are trying to use is on a network that is unavailable. Click OK to try again or enter an alternate path to a folder containing the insallation package "iTunes.msi" in the box below
When I click OK, get a message daying:
(file name) cannot be found Verify that you have access to this location and try again or try to find the installation package "iTunes.msi" in a folder from which you can install the product iTunes
I have no idea what to do!! Any help??

the feature you are trying to use is on a network that is unavailable. Click OK to try again or enter an alternate path to a folder containing the insallation package "iTunes.msi" in the box below
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select anyiTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Im runining windows 7 trying to upgrade to itunes11.02 but get error message that the file is not on a network - im not prepared to reload 5000 cd tracks would expect better service from apple can you help

please help

Many thanks.
the feature you are trying to use is on a network resource that is unavailable
click ok to try again or enter an alternative path to a folder containing the installation package itunes64.msi in the box below
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT5621 Trying to change the email on my apple ID but get error message that the email I want to change to is already used for notifications. What do I do?

Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this. The email address is connected to my Ipad and Iphone for the email app, can that have anything to do with it?
If it makes any difference, I updated both my Ipad3 and Iphone4 to ios 7 today. I'm trying to change from my Macbook air though.
Please advise, would really appreciate a reply ASAP.

caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/

How to get error message on the same jsp

Hi guys,
I have a login.jsp page and I want an error message to be printed "login failed" in the same jsp page when the user enters the wrong credentials.
Any ideas on how to do that is highly appreciated.
Thanx in advance.sri

If you use struts it would have been a lot easier and better than only JSP.
In struts :
Add this line in ur JSP page
<html:errors/>
In ur Action servlet ex: LoginAction.java add thsi code extract in the appropriate position ...
ActionErrors errors = new ActionErrors();
errors.add(ActionErrors.GLOBAL_ERROR, new ActionError("error.user.wrong"));
if (!errors.isEmpty())
saveErrors(request, errors);
But in JSP do something like this:-
If authentication fails then post to the same JSP and put this code in the reqd position...
<%
String postFlag=request.getParameter("postFlag");
if(postFlag.equals("FAILED"))
%>
LOGIN FAILED
<%
%>
So for JSp simply set the request parameter (postFlag) to SUCCESSFUL/FAILED from your servlet.

Itunes 10.5 will not install, getting error messages that the path cannot be found and that I need \itunes.msi. Anybody else having this problem and how do I fix it? I need it to update my phone OS!!!

Is anyone else getting an error message from Windows Installer that says it cannot find the correct path to install ITunes 10.5?? Or when trying to install it, it says that the older version cannot be removed?? I NEED HELP!! I want to upgrade my phone to iOS 5 and cannot without iTunes 10.5!

i think im getting this problem! ive got loadz of windows updates that wont update and i seen somewhere that that has something to do with why itunes wont download properly:/

How to get error message from the BPEL process

Hi,
We have some BPEL processes running in BPEL PM 10g. If any of these BPEL process fails, we would like to get the error message caused this process to fail.
Please let me know where does the BPEL proccess holds (table/file) these details. or is it possible to get the error message programatically.
Thanks

You can go through below link that can help
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1186
http://bpelknowledge.blogspot.com/2010/07/error-conditions-that-cannot-be-handled.html
http://blog.whitehorses.nl/2009/11/03/error-handling-in-soa-suite-11g/
Hope it helps!!
Thanks
AJ

I changed to a Sumsung S4. I deactivated my iphone. When some iphones sent me text messages they get error messages. The texts don't send. Help?

I switched from iphone 5 to Samsung S4. I could not receive messages from iphones. Learned I needed to deactivate imessaging. I did. Iphones give error messages now when sending messages to me, and I don't get the messages. Help!

See this about all the steps to deactivate iMessage. http://support.apple.com/kb/TS5185
The last step is to contact Apple Support if necessary.

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

I am getting error message in the colum of report

Hi,
I am getting error in the colum ,when i execute the report.
Error like 1987 ERROR.What would be the reason,even i was try to do some changes in the farmulea,but still i am getting error.
What is use of NODIM?

That sounds like a kernel panic. These are generally hardware related, often caused by poorly seated or fauly RAM.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

Getting Error Message on the MC84 transaction code MG144

Similar Messages

Maybe you are looking for