Getting error message ' Unable to convert sender service to an ALE logical
Hi,
I am using idoc to file.
and my xi system is working fine. at sudden when i process one idoc . I got this message.
Unable to convert sender service to an ALE logical system
Here in monitoring, i am able to see the success falg but in acknowledgement column, i see system error..
I did no change in configuration.
Your inputs will be appreciable.
Hi,
Also, is it possible that the XI system was recently upgraded?
As you indicated that no config changes were done, therefore, such error should not just pop up with no reason.
In an earlier release of XI (sorry I cannot recall the SP level), IDOC ack was not provided. However, in a later release, it is the default.
Regards,
Bill
Similar Messages
-
ERROR"Unable to convert sender service to an ALE logical system,(Urgent)
Hi All when i am not giving the sender service address in the Receiver Aggrement i am getting this perticular error .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
==========================================
And if i am giving this one then i am not getting any such error rather i am getting another error "Unable to convert sender service to an ALE logical system" for this also i have checked the LS system name in the Adapter specific Identifier and the logical name are exactly same. But still i am getting this error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
=============================================
Still i am getting this error can anyone please let me know what to do now..??
Please treat this as urgentHi,
This error is caused when Sender System name does not match the logical system name of partner. As you mentioned you have done all the steps to ensure that, here's a checklist that could be helpful:
1. Check adapter specific parameters for sender system.
2. Maintain header mapping in receiver agreement and ensure that sender service name provided is same as business partner name required in R3 and business partner type is LS.
3. This may sound very basic, but ensure that checkbox for 'Apply control record from payload' is not checked and if it is then the values passed through payload are appropriate.
Hope this would be helpful.
Thanks,
Bhavish -
Once again: Unable to convert sender service to an ALE logical system
Hi,
I know there's a lot of threads regarding that error but I didn't find one that fits to our current scenario:
IDoc -> XI -> File
We have checked if the logical system name in SALE (of sending system) fits to the one in the business system and it does now.
It didn't fit at first but we've changed it in the SLD and reimported the business system.
We still get the same message:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
There is no logical system entered in the receiver business system. Do we need that? But of which logical system?
Thanks for any advice
KarstenHi,
Acknowledgments
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender.( Ex : Idoc----File). Here by default Idoc has the inbuilt feature of requesting the Ack.
Acknowledgments are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments.
Sender adapters of the Adapter Engine do not request any acknowledgments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Regards
Seshagiri -
Unable to Convert Sender Service to an ALE Logical system
Hi,
I am doing a simple SOAP -> PI 7.11 -> IDOC scenario. All objects are created and activated. In testing I get an error
Unable to convert the sender service TemporaryDisconnection_Sender to an ALE logical system
Sender is a Business Service.
I search SDN and found this blog /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
I did the Compare with SLD for the Business System. But still the error comes.
In mapping I Disable EDI_DC40 segment.
Also find one suggestion which tells to change the Header Mapping in Receiver Agreement, what exactly should I put in Sender Communication Component of the Header mapping?
Thank you,
Pankaj.Hi,
In this thread I could find a solution by Michal: Unable to convert the sender service to an ALE logical system
3. click on sender service (header mapping section) and select your business system that represents XI business system
Will try if it works for me also.
If there are any suggestions, then please do post.
Thank you,
Pankaj. -
Unable to convert sender service to an ALE logical
hi all,
I have referred N num of blogs and answers in form w.r.t to this error but still not able to resolve the error
analysis wat we have done is:
1. all the ALE settings w.r.t to R3 are correct.
2. LS names are maintained for both sender as well as for receiver in SLD.
3. Adapter specific parameters are been maintained.
This is Idoc to SOAP scenario.
please help us with ur suggestions!!!
Regards
AnuHi all,
Thank you all, Finally we could resolve the above error but got stuck with the below error..
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: . at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.RouteRequest(SoapServerMessage message) at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
My message mapping is working fine and even web service is up and running.. any more suggestions -
ERROR" unable to convert the service as an ALE logical system"
Hello All,
In SOAP to IDOC scenario I tested the webservice with the client tool. Its hitting the integration engine but its throwing up an error" unable to convert the service as an ALE logical system". How can I maintain a logical system for a service as its outside our landscape. Can any one let me know how to proceed with this.
Looking forward to expert comments.
Thanks and regards,
NeelimaHi,
Check this blog by Michal.
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Sudheer. -
Unable to convert the service as an ALE logical system
nHi to All..
I'm facing a problem in one scenario IDOC to RNIF. I got this problem "Unable to convert the sender service to an ALE logical system. In that Interface is working properly but the thing is Acknowledgement is showing error and when I was triggring the IDOC from ECC at the time message Data Receiving successfully but coming to Acknowledgement Am getting ERROR. Any one can please do the needful for this.
Note:- Sender is Business system and Receiver is Business Service
Thanks and Regards
SrinivasHi srini
Receiver System is SEND the acknowledge to ECC here only we are facing the problem
help me uderstand correctly ...
your asyn interface is ECC(sender)-to- Bservice receiver .(works fine)
now Bservice (sends an ACK)- to -ECC (receiver) - do u have other asyn interface for this .. must be.
if not this means you are trying out sync scenario in which you are expecting the ack to go back to ECC syn (which i think not possible or u need to use BPM as the idoc interface will be always asyn).
try giving the LS name in the Bservice , not in the Bsystem as you mentioned.or
open your receiver agreement and select header mapping - Sender service
choose your PI's business system
Regards,
Srinivas -
Sender service to an ALE logical system
Hi,
I have a question. I am getting an error "Unable to convert sender service to an ALE logical system". Please help!
Thank you.
regards,
Karun.MHi Karun,
Take a look at this excellent weblog
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
thanks,
Prashanth -
Error "Unable to convert the sender service to an ALE logical system"
Hi,
I send I message from XI to R3 and I get the error "Unable to convert the sender service to an ALE logical system" in transaction "sxmb_moni". I've configured the idoc-adapter, as following:
-I have created a business system "r3sys_bs" with a logical system "r3system". This business system is the idoc-adapter. This logical system is also created in transaction "bd54". In the ID I have assigned the business system the logical system (adapterspecific identification).
So, this error still appears.
Can anybody help me please?
Regards
StefanHi,
our scenario is JMS --> XI --> IDoc
so, I have created a business system "jms_bs" without a logical system in sld, that I use for the jms-connection to another software. so, the business system is a "third party".
Then I have created a business system with assigned logical system for the IDoc-Receiver as I in my first posting mentioned.
Which of both business systems need a logical system?
Thanks
Regards
Stefan -
i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
I have tried uninstalling itunes and re-installing it.
Turning off firewall and antivirus.
Has anyone had this before and if so how did you over come this issue?
Thanks in advanceHey troyboi12345,
Thanks for using Apple Support Communities.
To troubleshoot this issue, follow this article.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Have a nice day,
Mario -
Unable to convert the sender service XID_900 an ALE logical system Error~
Dear Expert:
I received a IDOC Ack but there is an error ocour~
Unable to convert the sender service XID_900 an ALE logical system
XID_900 is our business system that config in SLD.
it's very weird ....sender server should be like point to our BPM isn't?
Regards
Jack Leehi,
>>>it's very weird ....sender server should be like point to our BPM isn't?
this means that your XID_900 business system in Integration directory
does not have adapdater specific identifiers filled in
it has nothing to do with a BPM
also check out my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk -
Unable to convert the sender service to an ALE logical system
Hello,
file adapter > XI 3.0 > Idoc adapter > r/3 system
In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI > idoc scenario to this same r/3 system (using same sld business system)
I read other topics on this error but it seems they all talk about an IDOC outbound interface.
What should I check?
Thanks
BoazI do have the same problem as Boaz Paz
When I try :
file adapter > XI 3.0 > Idoc adapter > r/3 system
> This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
I get an error while XI tries to call its IDoc Adapter:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>AwayOrders</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
With the following trace logs :
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = AVTItalie</Trace>
<Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
2. declare "AVTItalia" as a business partner in SLD with the logical system name
Plz help! -
SOAP to IDOC: Unable to convert sender service BS to an ALE logical system
Hello everyone,
I have this scenario where i receive web services calls and have to integrate the received xml messages (idocs) into SAP R3 system.
I allready reveive the message in my XI engine, but i'm getting this error (being BS the name of my Business Service included in my external party):
"Unable to convert sender service BS to an ALE logical system"
I allready tried everything that is specified in this blog:
The specified item was not found.
Probably it doesn' fit my requirements. I'm not sure...
Can anyone help ?
Thank you in advance for any help
Nuno- do u have the same logical name defined in the BS and in the Adapter specific attributes.
also check if u have defined the logical system (SALE ) with the same name. -
Unable to convert sender service(BPM) to an ALE logical system
Hi All,
I am working on simple File to File Scenario where XI picks the File and process thru BPM and sends the file to R/3 Application server and wait for SYSTAT STATUS IDoc for the acknowledgement from R/3 System.
My scenario is working fine by receiving the STATUS IDoc and closing the BPM instance.
But later I am getting System error message as below:
Unable to convert sender service (BPM) to an ALE logical system
Any clues in this case?
Thanks in Advance.
Regards
Sudha.Hi Rajesh,
1. I am receiving the file into BPM and after validation Iu2019m splitting the file into multiple files.
2. Each split file sent to R/3 Application Server(by activating the correlation with the filename)
3. BPM will wait for SYSTAT STATUS IDoc (by using correlation with the filename) from R/3 System
for acknowledgement purpose. After receiving the respective STATUS IDoc (with the filename) then
BPM will close the instance.
4. If the STATUS IDoc not received with in specified duration an alert will raise and close the BPM
instance.
So we are not sending the STATUS IDoc data to Sender system.
Regards
Sudha. -
Unable to convert sender service BPM_Name to an ALE logical System
Hello ,
While sending from BPM to R/3 ( IDOC) i am getting the following error :
"Unable to convert sender service <BPM_Name> to an ALE logical system"
Please kindly advice,
ReddyHi Bujji,
I just remembered that you have to maintain your adapter specific parameters for your business process. The side effect however is that you have to define the business process name as logical system in your receiving SAP system and that you have to maintain partner profile settings.
The answer to your question is there in this Blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
If the above solution doesnot work.....
You can also try this, don't enter the "adapter specific settings" on the Integration Process. Instead enter a "Header Mapping" Sender Service in the Receiver Agreement. this should be the real sending system.
When you enter "adapter specific settings" in a BPM, the receiving SAP systems ALE layer thinks the sending system is your BPM - using the method discussed here we are overriding that so that ALE see's that its communicating with the real sending system.
I hope it helps....
Regards,
Abhy
Message was edited by: Abhy Thomas
Maybe you are looking for
-
How to make jar files at runtime in a server application
I am using Jung API and i need to load the class files in this JAR file for my application at runtime. I am using an applet which uses this API which is loaded with the help of a Servlet. The code is getting compiled but the JAR files and associated
-
26C100U LCD tv no sound or picture
This TV died yesterday. 2 yrs old. green light comes on but no sound or picture. Other functions do not work either. Unplugged over night still nothing. took back cover off and circuit boards look normal. Fuse is good. Capacitor looks ok. Any ideas?
-
Hi, I am looking for icons and their names that oracle uses in its DEFAULT&SMARTBAR menu. I like the previous and next record icons and want to use it in my customized menu but not sure what it is called ? I am using forms 11g. Any idea? Thanks Munis
-
FileNotFoundException thrown during deployment of EJB onto OAS
During the deployment of an EJB onto OAS, I got the following error messages: <snipped> Processing jar... Analyzing Beans... AppTierEJBClass Code generation for E:\\Oracle\\OASHome\\ows\\upload\\242TestOASAppSource.jar has been completed. Compiling g
-
Programmatically created calendar view does not appear on view selector menu
Hi! I'm using the following code to create a calendar view for a list: using (var site = new SPSite("http://localhost")) var viewFields = new System.Collections.Specialized.StringCollection { dateStartFieldName, dateEndFieldName, titleFieldName }; va