Getting error message while creating Contract through BAPI
Hi
I am getting a 'Specify either address number or address handle' message while creating contract from BAPI BAPI_CONTRACT_CREATEFROMDATA. Can someone please tell me what can be the cause.
Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai
Similar Messages
-
Getting Error Message while creating transformations
While creating transformation for char customer no in the rule type for constant , getting an error message source parameter 0001 is not being used.
Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai -
How do I stop getting error messages while creating a NEW iTunes account?
I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
Session Timeout. Your session has timed out. Please try this operation from the beginning.
I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
Thank you,
sun_teacherSee the thread here:
http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
We all had the same problem. -
Getting error message while creating encrypted table space
I have created an oracle wallet and while creating table space I am getting the following error..
Please provide me some thougts on this
Wallet status is below
file /usr/tp/sys/oracle/admin/ofss41d2/wallet OPEN
the tablespace creation syntax is
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT);
The error is
Error starting at line 7 in command:
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT)
Error at Command Line:7 Column:0
Error report:
SQL Error: ORA-28374: typed master key not found in wallet
I am using Oracle 11.2.0.3.0Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai -
Error message while creating Appropriation Request
Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors RAISE_EXCEPTION
Date and Time 18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
condition "ERROR_IN_STATUS".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLAIA_TOOL
Include LAIA_TOOLU11
Row 119
Module type (FUNCTION)
Module Name AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 * TYPE = SY-MSGTY
90 * CL = SY-MSGID
91 * NUMBER = SY-MSGNO
92 * PAR1 = SY-MSGV1
93 * PAR2 = SY-MSGV2
94 * PAR3 = SY-MSGV3
95 * PAR4 = SY-MSGV4
96 * IMPORTING
97 * RETURN = ls_return.
98 * endif.
99 * if not ls_return is initial.
100 * append ls_return to return.
101 * raise error_in_status.
102 * endif.
103 *
104 * Füllen der Ausgabetabellen
105 perform fill_output_tables tables lt_status
106 lt_jsto
107 et_appreq_status
108 et_appreqvarnt_status
109 et_appreq_user_status
110 et_appreqvarnt_user_status
111 lt_objnr
112 lt_objnr_varnt
113 lt_return
114 using i_language
115 i_with_text.
116
117 if not lt_return[] is initial.
118 append lines of lt_return to return.
>>>>> raise error_in_status.
120 endif.
121
122
123 ENDFUNCTION.Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
ERROR Message while creating Rebate condition record T code VBO1
Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
sivaHi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Unable to capture error message while creating an SO using bapi
Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar -
Deletion marked material should give error message while creating proc ord
Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur. -
Warning to error message while creating a SC
Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RKUse the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin -
Error message while creating or editing a report
Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software. -
Error message while creating an inbound delivery to generate an idoc
hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leoInbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps. -
Error Message while creating connection pool
Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Error message while creating database
Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
I am getting error message while attempting to upgrade the software to iOS 6.1.3
Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch -
Getting error message while defining Profit Center
Dear Expert,
Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
Thanks in Advance
Regards
KrishnaDear Krishna,
What is your B1 version and PL? Is it upgraded from an old one?
Thanks,
Gordon
Maybe you are looking for
-
As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections. But can we do that as below: add supporting details for more than one cells at the same time? I tried to do that in workspace and smartview
-
Problem while hide a block on selection screen on button press
Hi, I have added two buttons on the application toolbar of the selection screen. I have input fields under two blocks on the selection-screen. Initially the second block is hidden. If I press the button 1 the second block should be made visible. For
-
Web Page Composer in CE 7.2?
Hello All, We are implementing the Portal for our customer. As the customer requires a flashy screen we suggested CE 7.2. But, we noticed that Web Page Composer does not come along with CE 7.2. WPC is a very important component and it is critical for
-
Photoshop CS6 Extended Upgrade
Where can I get Adobe CS6 Extended upgrade (from CS5 Extended) for windows on a disk and NOT a download and what is the cost? I don't want an eduction copy.
-
I have a 4s and when I try to delete apps it wont work.
The x in the corner does not appear. I am trying to reboot it now. But I really need space on my phone and I dont want to have to reboot it and lose all my numbers.