Getting error message while creating encrypted table space
I have created an oracle wallet and while creating table space I am getting the following error..
Please provide me some thougts on this
Wallet status is below
file /usr/tp/sys/oracle/admin/ofss41d2/wallet OPEN
the tablespace creation syntax is
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT);
The error is
Error starting at line 7 in command:
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT)
Error at Command Line:7 Column:0
Error report:
SQL Error: ORA-28374: typed master key not found in wallet
I am using Oracle 11.2.0.3.0
Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai
Similar Messages
-
Getting error message while creating Contract through BAPI
Hi
I am getting a 'Specify either address number or address handle' message while creating contract from BAPI BAPI_CONTRACT_CREATEFROMDATA. Can someone please tell me what can be the cause.Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai -
Getting Error Message while creating transformations
While creating transformation for char customer no in the rule type for constant , getting an error message source parameter 0001 is not being used.
Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai -
How do I stop getting error messages while creating a NEW iTunes account?
I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
Session Timeout. Your session has timed out. Please try this operation from the beginning.
I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
Thank you,
sun_teacherSee the thread here:
http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
We all had the same problem. -
Error message while creating Appropriation Request
Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors RAISE_EXCEPTION
Date and Time 18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
condition "ERROR_IN_STATUS".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLAIA_TOOL
Include LAIA_TOOLU11
Row 119
Module type (FUNCTION)
Module Name AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 * TYPE = SY-MSGTY
90 * CL = SY-MSGID
91 * NUMBER = SY-MSGNO
92 * PAR1 = SY-MSGV1
93 * PAR2 = SY-MSGV2
94 * PAR3 = SY-MSGV3
95 * PAR4 = SY-MSGV4
96 * IMPORTING
97 * RETURN = ls_return.
98 * endif.
99 * if not ls_return is initial.
100 * append ls_return to return.
101 * raise error_in_status.
102 * endif.
103 *
104 * Füllen der Ausgabetabellen
105 perform fill_output_tables tables lt_status
106 lt_jsto
107 et_appreq_status
108 et_appreqvarnt_status
109 et_appreq_user_status
110 et_appreqvarnt_user_status
111 lt_objnr
112 lt_objnr_varnt
113 lt_return
114 using i_language
115 i_with_text.
116
117 if not lt_return[] is initial.
118 append lines of lt_return to return.
>>>>> raise error_in_status.
120 endif.
121
122
123 ENDFUNCTION.Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
ERROR Message while creating Rebate condition record T code VBO1
Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
sivaHi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Getting error message while opening PDF file.
Hello Experts....
I'm getting error message while opening the attached PDF file in mail.
I'm Sending the payslip to mail which is converted into .PDF format.
Where exactly the problem i m not getting.
Please help....CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = rqident
no_dialog = ' '
DST_DEVICE = out_parms-pdest
PDF_DESTINATION =
get_size_from_format = out_parms-pdest
IMPORTING
pdf_bytecount = bytecount
pdf_spoolid = pdfspoolid
LIST_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = out_tab
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
IF sy-subrc NE 0.
ENDIF.
*CALL FUNCTION 'BAPI_GET_PAYSLIP_PDF'
EXPORTING
employeenumber = PERNR-PERNR
sequencenumber = '00001'
payslipvariant = 'PAYSLIP-PM'
IMPORTING
RETURN =
PAYSLIP = PAYSLIP
PDF_FSIZE =
******************CONVERTING PAYSLIP(XSTRING) TO BINARY FORMAT******
call function 'SCMS_XSTRING_TO_BINARY'
exporting
buffer = payslip
APPEND_TO_TABLE = ' '
IMPORTING
OUTPUT_LENGTH =
tables
binary_tab = OUT_TAB.
check not ( out_tab[] is initial ).
refresh i_record.
clear : i_record.
call function 'QCE1_CONVERT'
tables
t_source_tab = out_tab
t_target_tab = i_record
exceptions
convert_not_possible = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
do.
i_record = it_attachment_long.
append i_record.
shift it_attachment_long left by 255 places.
if it_attachment_long is initial.
exit.
endif.
enddo.
select single ltx into subject from t247
where mnr eq pn-begda+4(2)
and spras eq 'EN'.
condense subject.
concatenate 'Payslip for the month of' subject pn-begda+0(4)
into subject separated by space.
describe table lt_objbin lines l_att_lines.
read table lt_objbin index l_att_lines.
lv_document_data-doc_size = tab_lines * 255 .
lv_document_data-obj_name = 'Payslip'.
lv_document_data-obj_descr = subject.
e-mail body
clear lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = tab_lines.
lt_objpack-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
append lt_objpack.
For e-mail attachment
lt_objhead = 'payslip.pdf'.
append lt_objhead.
lt_objbin[] = out_tab[]."i_record[].
"describe table i_record lines l_att_lines.
describe table out_tab lines l_att_lines.
CLEAR LT_OBJPACK.
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_att_lines.
lt_objpack-doc_type = 'PDF'.
lt_objpack-obj_name = 'attachment'.
lt_objpack-obj_descr = 'payslip'.
lt_objpack-doc_size = ( l_att_lines - 1 ) * 255 + strlen( lt_objbin ).
append lt_objpack.
make recipient list
" check user_mail_id is not initial.
lt_reclist-receiver = user_mail_id.
lt_reclist-rec_type = 'U'.
append lt_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = lv_document_data
put_in_outbox = 'X'
commit_work = 'X'
tables
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.
write:/ 'Mail sent to', 30 user_mail_id.
write : sy-uline.
else.
write:/ 'Error encountered'.
endif.
clear : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
refresh : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
clear : filepath+3(17), pdffile, encryptpdf, batch_file.
clear : out_tab, i_record, filetable.
clear : user_mail_id, password.
else.
write : 'payslip not generated'.
endif.
end-of-selection.
Please Check.... -
Unable to capture error message while creating an SO using bapi
Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar -
Warning to error message while creating a SC
Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RKUse the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin -
Error message while creating or editing a report
Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software. -
Error message while creating an inbound delivery to generate an idoc
hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leoInbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps. -
Error Message while creating connection pool
Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Error message while creating database
Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Getting error message while updating Job attributes using PP03 for IT1641
Hey Guys,
We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
Thanks...
Edited by: Karan Gheewala on Apr 3, 2008 9:06 PMSolved using Note 123383 - WC: Customizing worker's compensation tables
Thanks,.. -
Deletion marked material should give error message while creating proc ord
Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.
Maybe you are looking for
-
I cant seem to download the latset version of itunes onto my laptop computer. I keep getting this error HRESULT: 0x8007054F. Dont know what that means. Please HELP!!!!!!!!!!!!!!
-
IOS5 upgrade/iCloud/Loss of Photos
Finally got around to upgrading my iPad(1) with iOS5....somehow in doing so I 'lost' all the photos on the iPad. I have duplicates of the photos on my iMac. Can I, and if so how, transfer photos from the Mac to the iPad? Both 'puters are using iC
-
Web Component with servlet in j2ee 1.4.2
I get this error message when I try to deploy my .war file using the deploy tool: distribute: C:\Sun\AppServer2\Applications\WV\WV_WEB.war [TIMEOUT: 'ProgressObject' never started running.] !!! Operation Incomplete [NotRunning] !!! [Completed (time=1
-
How do i save a flow chart I created in pages into a pdf? i can't figure it out
-
Hi everyone, I have no idea on how to code jexcel. I need immediate help in this topic. Im using jsp and mysql for my programming. I hope u all can help me in the coding for reading and writing excel files in java. Thanks