Getting error message with 1230 autonomous access point

When try to add a new WLAN, i get an error
This 'VLAN ID' is already in use. Choose an unique VLAN ID
I am using an old image 12.3(2)JA2
can somebody guide me on the same
Thanks in advance
Nikhil

Go ahead and post your config as it is, as well as the commands you're trying to enter. It sounds like the VLAN you're wanting to use is already in use by another SSID, or at least the AP thinks it is.
Keep in mind that you can only have one SSID per VLAN.

Similar Messages

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.)

Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H.

Getting Error Message When Trying to Access iTunes Music

Hi!
Need some help.
Little Mac Mini has been through a lot after foobaring after the last update. To bring you up to speed, I had to get Apple Genius Bar to fix the problem but they re-installed the OS by installing 10.4.7, Safari 2.0.4 and iTunes 7.0.x even though it had had 10.4.11, Safari 3.0.4 and iTunes 7.5 on it before the problem. Even when it was offline with Safari and mail crashing, iTunes worked fine. After Apple's re-installing 10.4.7, iTunes had problems and gave me a message that it could not play the video files because the quicktime version was too old. So Quicktime too was re-installed using an older version. Why did Apple Genius Bar fellow do this?
Anyway... after this I found an underlying problem with the directory and had to restart with Tiger install disc and run Repair Disk to fix it. Then I got the computer back up to 10.4.11, Safari 3.0.4 and iTunes 7.5 using Apple's combo update and Software update. Repaired permissions and verified disk, everything.
So here is the problem, I can not get iTunes to access my music on the external hard drive anymore. I remember getting a message that suggested that something happened to the xml file.
Here's the thing: I have two complete copies of the iTunes music on two external hard drives. I also have, in addition to these, a complete copy of the iTunes Music backed up using the Apple program "Back-Up." Usually, I keep iTunes pointing to the music folder on one of the external hard drives, but now, it insists on opening up the iTunes music on the internal which has very little music on it. I know how to open the other music libraries by holding down the option key and starting iTunes and choosing a library. In the past when I did this I got iTunes up with all of my music, etc. fine. I used to be able to access the music library on one external and then switch to the other library by holding the down the option key while starting iTunes. But now, I get a message that says "An iTunes Library file could not be found in the folder 'iTunes Music.' Please change to another" irregardless of which library I choose. What does this message mean? How do I get iTunes to access the music in these libraries again?
I know that the music libraries are all fine on the externals, because I have gone and found them. All is okay with that, but I can't get iTunes to see them. Could this be because the xml file is missing? I can't seem to find it anywhere. Not in the main hard drive or on any of the externals. If it is missing and I need it, where can I get it and where, exactly do I put it. I am a bit sketchy on my understanding of the file hierarchy as you can tell.
I do have back-up. Would a restore fix the problem. My little mac only has about 6 gigs left in it's internal so there is not enough room to put the music back into the internal iTunes that it is currently working from. Can I restore the back up version on to one of the externals? I don't know really what to do.
What am I missing? Thank you so much!- Charlotte

Well... no response.?
Anyway.... solved my own problem. Apple should hire me.
Actually read another post and got an idea. Held down the option key while starting iTunes. Got the window that asks if I want to create a new library or to choose a library. I had been choosing and finding that my libraries on the two external hard drives were damaged. Yes... I think it was because the iTunes Library files and the iTunes Library xml files were missing. So instead of choosing library, I chose to create a new library. Of course it brought up iTunes with nothing in it. I opened the folder "iTunes" on that same external hard drive and boldly clicked and dragged it on to the empty Music section of iTunes. It imported! First importing everything. Music, podcasts, video, audio books, etc. and then imported album art and then boom, it was all there. With trepidation, I closed iTunes and reopened it and yes, all is there still... like in.... it works! It plays! I've been listening to music while typing this.
Of course, the playlists and play counts, ratings are gone. Yes... I expected that, but I have all of the media and that is what is important. Even the things I downloaded just before the problem happened is in there. Okay... well that's good.
Hey.... what ever you do, keep back ups and copies, like several and in several formats and all over the place. For instance, most of my music is backed-up in five places. On a cd, also on a dvd, and also in three places on two different external hard drives!
Okay.. for the weird thing and it's only weird to me because I obviously do not completely understand the file system in the mac. It's this: Before I created this new library, when I went to the external hard drive I found the folder labeled "iTunes" and no other folders. The iTunes folder only contained the media content and I could not find the library or library xml files. Now after importing that one iTunes folder into the newly created library and allowing it to get everything into it, going to the external hard drive I had expected to see a new folder with a new copy of all of the music content in it but instead I found a new folder labeled " iTunes1" and opening it, I found the library and library xml files. Ah.... so if I am understanding this correctly, what "creating a new library" did was to add in new the library and library xml files that were missing, but it still accessed the "iTunes" folder with all of the content that was already there. So... in essence fixing the problem. Yes... this would be correct because the external has the same amount of gigs used as it had before I created the new library. This is way cool! And no, I did not mess anything up, my computer's internal hasn't enough space for the iTunes music content and it's showing the same amount of space used so it's not like it moved the stuff into the internal. It couldn't do that, anyway.
I shall thank the guys on the other post for their help. Hope this helps others.
By the way... this whole problem happened originally because apparently my hard disk had errors in the directory and the downloading of the last security update (security update 2007-009) was just too much for it.
Look before updating always check by going to Utilities and performing a "permissions repair" and also running "Verify disk," even if you see that your S.M.A.R.T. disk shows "verified." If verify disk shows any errors or problems then perform a disk repair. Do this before any update or installation or you may run into serious trouble. To do this get out your OS install disk. Use the Tiger one if your computer is currently running Tiger. Leopard one if it's using Leopard. Put the disk in and re-start your computer. As soon as it is off and before it even begins to start up, hold down the C key on the keyboard and keep holding it down until you get the message asking what language you want. Don't panic, this is correct. It will look like it wants to install the OS again. Don't re-install the OS. But you can choose the language. Here I was panicking and I don't want you to. At the top you will see the installer bar. Go to Disk Utility up on that bar and click on that, it will take you to Disk Utility and you will then and only then be able to perform a disk repair by clicking on "Repair Disk." Do it! Do it a couple of times until the thing reports that the disk has no problems. I forgot how it states this but I do remember that the lettering is in green. Green is great! Close Disk Utility. Quit Installer. A window will come up asking you to choose where to restart from so choose your internal hard drive and it should restart and be good to go.
Trust me, the updates are fine. 10.4.11, Safari 3.0.4 and iTunes 7.5 are good, it's existing problems in your computer's directory or keychains that is causing the problems when updating or installing new stuff. I had to learn all of this the hard way, even though I tried to keep my mac clean and in top shape, and even though I asked and asked the Genius Bar guys at the local Apple store if there is anything more I needed to know to prevent difficulties. I learned all this here, in these discussions, in answer to my posts under other sections. Thanks Klaus1, Hawaiian_Starman, dechamp, and baltwo!
Okay.. if I got anything wrong in my descriptions, please, please correct me! I don't want to be inaccurate. I want to know this stuff!
Thank you so much for persevering through my long post, here. -Charlotte

Getting error message when trying to access video on my iPad

Hi this is my first time on this site so bear with me if I do the wrong thing.
Here goes I have read through some of the answers to the question but mostly they seem to related to YouTube. My question relates to my iPad. I get an error message when trying to view a video which I synced from my macbook pro. The message reads "You do not have permission to access the requested resource" The question is how do I get permission. Has anyone got an answer would be much appreciated.

Hi this is my first time on this site so bear with me if I do the wrong thing.
Here goes I have read through some of the answers to the question but mostly they seem to related to YouTube. My question relates to my iPad. I get an error message when trying to view a video which I synced from my macbook pro. The message reads "You do not have permission to access the requested resource" The question is how do I get permission. Has anyone got an answer would be much appreciated.

Getting error message with Itunes

Telling me to remove Itunes and reload with 64 bit version. Using laptop with Windows 7, also have desktop using Windows Xp and dont get this message.

Many thanks.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

When I try to run applications on my domain controller, I get error message, "The service cannot access control messages at this time."

My domain controller is Windows Services 2008 R2. I get this error message when trying to open Active Directory, Group Policy, services, etc. We had this problem previously. Rebooted the server and it worked for awhile, but the problem
has reoccurred.

I would agree with others. Installing recent updates might solve the issue. Also, checking the errors in event viewer might help.
Have you tried to reboot the server? If no, you can start with that.
If none of the propositions helped, you can consider doing the following if you have at least one additional DC/DNS/GC server:
Run netdom query fsmo to identify the FSMO roles that the faulty DC is holding
Transfer FSMO roles that the faulty DC is holding to another healthy DC
Demote the faulty DC (If you are unable to do it, you can consider running
dcpromo /forceremoval and running a metadata cleanup)
Re-install the OS of the faulty DC and install the recent updates
Promote the re-installed server as a DC/DNS/GC server
Of course, you need to consider taking system state backups before proceeding.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Get Error message with Roport Generation toolkit

Hi:
I am new to labview and want to make a report that content of the FFT spectrum data and FFT figure. a error message as *The report generation toolkit does not support the data you are using*.I used a for loop for calculate the FFT,does this cause the problem?I really do know how to settle it.Any suggestion is welcome!Thanks in advance!!

You do not need to use the Unbundle function - you already have the data available, so you're just performing an operation to get data you already have. Just use wires:
yujin wrote:
.I really do not know how to add the waterfall to report,it seems can be translate to waveform.Even it is translated the report will also just be 2D show but not waterfall show.I wonder how I can get the picture of the waterfall,if so I can get it into report.But I do not know how I can do this,can you teach me?
I don't have LV 2009 running right now, so I can't give you the details, but basically what you need to do is to the get the image of the graph and add it to the report. You can use the Image to File method to save the image to file and then use the Report functions to add the image to the report. I can verify this tomorrow.
Attachments:
rewire.png ‏9 KB

Firefox will not open at all, keep getting error message with last 2 saved web pages on it

Yesterday, I closed Firefox. I had multiple tabs opened, so it asked me if I wanted to save them. I clicked YES and closed Firefox.
I had Google Docs open at the time.
Now, when I open up Firefox, everytime, it tries to load the 2 saved pages, then gives me an error message saying that Windows will try to find the solution to why it can't open.
I cannot use Firefox at all now.
How can I fix this?
I have re-installed Firefox completely and it does not work, it remembers my settings.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

ADOBE READER 8.1 WILL NOT WORK-KEEP GETTING ERROR MESSAGE 1606: COULD NOT ACCESS NETWORK LOCATION %APPDATA%

Have tried to uninstall the Adobe Program but it will not let me. I keep getting the 1606 error message. I have went to the Microsoft Help site and it says that the registry may need to be modified. They also advised you that if you do not modify it correctly you may have very serious problems.

Please see this Microsoft KB article http://support.microsoft.com/kb/886549/
Some registry entry may have been corrupted, and it needs to be fixed. If you don't know how to edit the registry, do you have somebody who is confident enough to edit the Windows registry?
Anyway, for now I just want you to check something in the registry - don't modify anything yet!
Click Start | Run | type regedit [Enter]
Once the Registry Editor is open, drill down to the following subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
In here you should see multiple entries, one being AppData - what is the data value on the right side? It should be %USERPROFILE%\Application Data.
Please close the registry editor now, and report back what you found.

Two Sites Published With iWeb...Viewers Get Error Message With Second Site

I have used iWeb to create two web sites. I believe I have done so properly, using File>New Site to begin creating the second site. After publishing, I can visit both sites from within iWeb.
Curiously, the message panel that displays after successful publishing indicates the same URL for both web sites. Obviously, that's wrong. That address will open the first site properly (after automatically adding additional characters to the URL during opening), but is incorrect for the second site. As an alternative, I have visited both sites from within iWeb, and copied the URL from the browser window as the "proper" address.
When I use the copied URL's in my own browser, I can navigate to each of the websites properly. However, when I give those URL's to someone else, they get an error message that the second site cannot be found using the URL for the second site that I obtained using the "copying" technique described. That's the case even though both URL's work properly from my computer and browser.
Any suggestions as to what might be wrong?
Desktop G4 Mac OS X (10.4.4)

Fred:
Mount your iDisk and go to the iDisk/Web/Sites folder and delete your friend's site folder that's there. The example below shows many site folders in the Sites folder.
Click to view full size
OT

Getting error message with javah -jni

Hi,
I am trying to generate .h file using javah -jni command.
I am executing the
prompt>javah -jni C:\proj\HelloWorld
But it's giving the error
Error: Class HelloWorld could not be found.
But the class file is there in that folder.
Could you please tell me why i am getting this error?
Regards,
Srinivas.

Try this:
javah -jni -classpath C:\proj HelloWorld
Usage: javah [options] <classes>
where [options] include:
        -help                 Print this help message and exit
        -classpath <path>     Path from which to load classes
        -bootclasspath <path> Path from which to load bootstrap classes
        -d <dir>              Output directory
        -o <file>             Output file (only one of -d or -o may be used)
        -jni                  Generate JNI-style header file (default)
        -old                  Generate old JDK1.0-style header file
        -stubs                Generate a stubs file
        -version              Print version information
        -verbose              Enable verbose output
        -force                Always write output files
<classes> are specified with their fully qualified names (for
instance, java.lang.Object).

Getting Error message while trying to access security editior for a IDT universe

Hi,
I have created universe in SAP BO4.1, using IDT.
I have applied row level security for User Groups using Security Editor.
I have published the changes to repository.
But when I am trying to re open the security editor for that universe its throwing error:
"Unable to load security for universe ID ATF10O... (IDT 022123)."
I am not able to edit row level security, even this security restriction is not restricting data in WebI report.
Thanks for your response.

Hi Sonal,
The local file of Business Security Profile is missing or damaged.
Resolution
Use the workflow to reset the problematic Business Security Profile in the filestore. After that, you can manually re-create the new Business Security Profile to make it working.
Logon to CMC and find the ID of the universe with issue(e.g. 9010).
Logon to Query Builder (http://<web server>:<port>/AdminTools/).
Find the detail information about this universe with the following SQL statement:
select * from CI_APPOBJECTS where SI_ID = 9010
In the Search Results List, you will find a row with the title of SI_SL_BSPS (Business Security Profile), note down the number of it(e.g. 9016).
Then search with the following SQL statement in the Query Builder:
select * from CI_APPOBJECTS where SI_ID = 9016
In the Search Results List, SI_PATH is the local file address of the Business Security Profile (e.g. frs://Input/a_146/035/000/9106/).
Then you can back up the file and delete it.
Select a Business Security Profile without issue and rename it as the deleted one.
Put the new normal Business Security Profile under the location of the deleted file.
Then you can delete it in the IDT and recreate it normally.
Refer: SAP Note - 2080272 - Error "Universe access failure Unable to load security for Universe ID XXX (IDT 022123)" appears when editing a Business Security Profile in Information Design Tool
--Raji. S

I am trying to install software. I keep getting error message: 1008:9,-5000 Access denied Error. Plus: "You don't have enough access privileges for this installation." I have Administration privileges on MY machine. So, why can't I install software on it?

The machine I am trying to install on is a MacBook Pro. The software is for an IRIScan express 2 scanner. It says (and provides a disc containing the software) it is compatible with Mac OS.
In System reqirements it states the following:
This is the minimal system configuration required to use Readiris:
a Mac OS computer with a G3 processor.
the operating system Mac OS X version 10.2 (“Jaguar”). Earlier ver- sions of the Mac OS operating system are not supported!
110 MB of free hard disk space.
I have no idea what (nor where to find out if it has) a G3 processor is. My machine has Mountain Lion. Is this "above" or "below" "Jaguar"?
Any assistance will be appreciated.

I'll try Silverfast.
Err... Try VueScan first. VueScan have one-for-all software, Silverfast - lot of modules for specific scanners. If they not have version for your specific scanner - no chances.
VueScan works with at least some IRIS models: http://applejac.typepad.com/applejac_macintosh_users/2009/05/vuescan-universal-s oftware-image-capture-tool.html
And I see 10.7-10.8 support on IRIS page: http://www.irislink.com/c2-1628-189/Mac-OS-compatibility-support.aspx

Why do I get error message HDCP when I try to stream?

when try to stream a rented movie from iTunes I get error message with HDCP?

OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4 HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series. Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and cracked versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.)

Getting error message with 1230 autonomous access point

Similar Messages

Maybe you are looking for