Getting error : " not found Number object J_1IDEPINV "

Hi SAP Expert,
When I am posting Excise Invoice at Depot using J1iJ, i am getting the error : " Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV " when trying to Save.
Already checked that I have maintained the number range for object J_1IDEPINV in J1i9 for my series group. But I am still getting the same error. Any clue ?

You would have maintained the number range for the required series group but ensure that it is maintained for the current year.
thanks
G. Lakshmipathi

Similar Messages

Error in allocating Despatch number Interval not found Number object J_1IIN

Dear All,
I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
Can somebody help me with a solution ?
Rgds,
Indrajit Dey

Dear Indrajit
Go to SNUM, input object J_1IINTPR2 and click on Number Ranges. Enter [Excise Group] and click on Intervals (with pencil icon). Maintain the number range and save. Now try the process once again.
thanks
G. Lakshmipathi

Error in allocating Despatch serial number Interval not found Number object

Hi All,
While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
"Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
Message no. 8I336"
The Excise Group(say 99) was created.
But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object J_1IINTPR2.
Do the needful to resolve this issue.
Needless to say helpful answers will be rewarded.
Regards,
Raj Kumar Reddy.

Dear Raj,
Go to Excise group details here you check these settings
IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
Have you check all these check boxes
1.Excise Inv during billing
2.Create and Post Invsingle step
3,Depot Excise invoice
4.EI capture
5.Diuty Different at GR
6.EI create/RG23D selection
7.Update RG1 at MIGO
I hope this will help you,
Regards,
Murali.

Error in allocating RG23D document number Interval not found Number object

Dear
Expert
Error in allocating RG23D document number Interval not found Number object J_1IRG23D
I tried the solution given in the forum but its not working,
Pls help me out.
Thanks and Regards
Deepankar

Hi,
As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
hope now its clear.
Thanks and regards
Deepankar

Interval not found number object J_1IINTNUM.

<b>Dear friends,
During creation of excise invoice(t code J1IIN) i found
Error in allocating int. doc number
Interval not found number object J_1IINTNUM.
PLEASE HELP
Ranjan</b>

Dear Ranjan,
Go to transaction SNRO enter J_1IINTNUM -> click on Number ranges pushbutton option in the applicaiton toolbar -> Click on Change Interval pushbutton -> Maintain Number Range Interval and save.
Regards,
Naveen.

Despatch serial number Interval not found Number object J_1IINTPR2

Hi all,
I am facing one error when creating excise invoice.
system shows the following error.
Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
For this, i tried to maintain number range in j1i9 object J_1IINTPR2.
Here system is not showing excise group number.
But for one company code it shows and another company code excise group code is not displayed.
Can anyone tell me what will be the problem?
Thanks in advance,
Babs

Thanks for your reply..........
excise group 10 belongs to first plant
excise group 20 belongs to second plant.
settings are maintained same for the two excise group.
excise group 10 is displayed in J1I9 (Number object J_1IINTPR2).
But excise group 20 is not displayed over there. I want to maintain number range for excise group 20.
Thanks in advance
Babs

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Go here (You may need to use the chat option.):
Activation & Deactivation Help
This is the Photoshop Forum.
Note to mod: Please move to the Photoshop Elements forum.

"Error in allocating Excise invoice number Interval not found Number object

Hi friends,
I am getting above error while creating the Excise Invoice. I have checked all the settings like No range in SNUM for object J_1IEXCLOC and all other settings. I have posted the thread earlier related to same problem and issue was resolved.Now I am facing the same problem and I have checked all the settings.
Looking forward for u r valuable inputs.
Regards
Jaiprakash

Try these customizings regarding your process.
Go to IMG Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.
There select your excise group and untick the box against the tab "Create EI". Now rerun the process and post the feedback.
SAP Customizing Implementation Guide>>>>>>Logistics - General>>>>>Tax on Goods Movements>>>>>
India>>>>>Business Transactions>>>.>>Outgoing Excise Invoices>>>>>Maintain Default Excise Groups and Series Groups
Above setting is only made for differentiate of Export sale transactions .............
Go to J_1iintpr2 and check the interval for current year.
Best regards,
Ankur
Edited by: Ankur Agrawal on Jun 22, 2009 6:13 PM

Error in allocating Excise inv no Interval not found No object J_1IEXCLOC

Hi, When I try to execute J1IV, I am getting the below error:
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
Regards
Suresh

Hi,
Please check in SNRO as you allocated no range for J_1IEXCLOC object for your series group & check for J_1IARE3 object also for same series group.
regards

Entry not found in object buffer

Hi,
When we create service desk message we are getting Entry not found in object buffer error error. Can you please help me out to resolve this issue.
Thanks

Hello again,
Is it a customized support message (e.g. ZLFN for instance) or the standard one ? If customer message, check your action profile... You need to have a copy from the standard action SLFN0001_ADVANCED_UPDATE_DNO.
Hope it helps.
BR.
Stéphane.

Funds mngt - Number range 01 not found for object BULI_DOCNR

Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advance

The number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Director Player Error : Handler not found in object

Hi,
I have made an exe to run a video in Director. This was done using old version of director, 8.5 supposedly.
When i try to run video through this exe, the video plays in background but i get the following error(snapshot attached):
"Handler not found in object
# openport
Script Error. Continue?"
I have installed shockwave player 8.5 and also put all the files from xtra folder to the folder where exe in lying but still i am getting the same error.
Any help will be greatly appreciated.

Looks like something in one of the scripts in your project that is being called but is not working correctly for some reason.
Without seeing the code it's hard to tell what the problem may be. I'm wondering if there's one of the old-style line continuation characters that may be breaking the #openport handler somewhere in your scripts.

Entry not found in object buffer error in leasing quotation

i am getting following error in SAP CRM 7.0 in quotation level.
when i am entering financing product in quotation.
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Dates Administrator
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Administrator

thank for your reply
At least we found out message class of this message.
From your given Function module we could identify that it giving information message, but we are experiencing error of object buffer related message.
In error it showing sub object as "Dates", can you please guide us to elaborate this further.
Regards,
Vikil

Trying to track a package on FedEx website and get "Framework Not Found" error message

Either by clicking on the email from FedEx and launching Firefox or by opening the FedEx website and entering the tracking number, I get "Framework not found" error and the search stops. It worked with previous Firefox versions but not with the new 4.0.1 version. Any suggestions?

I tried it with firefox and chrome and have the problem in both browsers, so it is not browser specific.

Getting error : " not found Number object J_1IDEPINV "

Similar Messages

Maybe you are looking for