Getting error related to Purchasing organisation in Enterprise buyer
Hi experts,
I have created one user in the SRM server,
i have given him a sufficient roles in the system,
But when i am logging on to the Enterprise buyer i am getting following two errors when i click on "Carry out sourcing".
1.User data was not found; Inform the system administrator.
2.Your user was not assigned to a purchasing organization.
the roles which i have given to this user is having almost all the roles and for that user this error is not coming in enterprise buyer.
Please someone tell me how to assign Purchasing organization to specific user.
Hi Paresh,
You can assign users to any of the Org units i.e P.Org, P.Group, Co.Code etc using USERS_GEN transaction.
You can see the already assigned users under various Org. units (P.Org, P.Group, Co.code etc).
The other way of assigning users is to right click on the Org. unit under which you want to assign the user then search for the concerned user and do the assignment.
Its not mandatory to assign users to P.Org. You can assign users to the P.Group under the concerned P.Org.You have to maintain the P.org under the responsibility tab of the concerned P.group.
Hope this makes you more clear and helps in understanding the issue. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja
Similar Messages
-
I am getting errors related to a plant not in that plant range .
I have created a costing run for company code 6000 and defined a plant number range in the Selection Parameters However, I am getting errors related to a plant not in that plant range . Can you explain this?
What does the error say?
If you get this when you try to mark or release the Cost Estimate, you should be able to ignore the error. The system complaints that Marking has not been allowed for some plants etc. Nothing of significance.
Else, check the transfer control. Either way, maybe we can answer better if we know what the error is.
Cheers. -
Get error while Integrating with Oracle's Enterprise User Security
Hi,
I am trying to create an Oracle Enterprise User integrating with OVD and MS Active Directory.
I am following all the steps in Integrating with Oracle's Enterprise User Security.
In the documentation section: "Configuring Oracle Virtual Directory for the Integration"
I have applied the steps successfully until:
Update and load the entries into the Local Store Adapters by performing the following steps:
I have successfully extended the Oracle Virtual Directory schema with the loadOVD.ldif
However I am getting errors in the next step: Update realmRoot.ldif to use your namespaces
The next step states the following:
Update realmRoot.ldif to use your namespaces, including the dn, dc, o, orclsubscriberfullname,
and memberurl attributes in the file. If you have a DN mapping between Active Directory and
Oracle Virtual Directory, use the DN that you see from Oracle Virtual Directory.
The realmRoot.ldif file is located in ORACLE_VIRTUAL_DIRECTORY_HOME/eus,
where ORACLE_VIRTUAL_DIRECTORY_HOME represents the location where Oracle Virtual Directory is installed.
The realmRoot.ldif file contains core entries in the directory namespace that Enterprise User Security queries. The realmRoot.ldif file also contains the dynamic group that contains the registered Enterprise User Security databases to allow secured access to sensitive Enterprise User Security related attributes, like the user's Enterprise User Security hashed password attribute.
Load your domain root information in the realmRoot.ldif file into Oracle Virtual Directory using the following command:
ldapmodify -h Oracle_Virtual_Directory_Host –p OVD_Port -D cn=admin -w Admin_Password -v -a –f realmRoot.ldif
When I run the ldapmodify command I get the following error:
add dc:
testldap
add objectclass:
top
domain
domainDNS
adding new entry DC=testldap,DC=local
ldap_add: Operations error
ldap_add: additional info: LDAP Error 1 : null
The actual realmRoot.ldif looks like this:
# Please uncomment the following one line if you are importing this
# LDIF file via OVD Manager or OVD Server's ldapmodify tool.
#version: 1
#dn: dc=com
#dc: com
#objectclass: domain
dn: DC=testldap,DC=local
changetype: add
dc: testldap
#o: subarashii
objectclass: top
objectclass: domain
objectclass: domainDNS
#objectclass: orclSubscriber
#orclsubscriberfullname: subarashii
#orclVersion: 90400
# If your domain structure has more layers than dc=subarashii,dc=com,
# for example, it's dc=us,dc=subarashii,dc=com, you will need to load
# the following ldif entry/entries too.
# Uncomment out the following, if required.
#dn: dc=us,dc=subarashii,dc=com
#orclversion: 90400
#orclsubscriberfullname: us
#objectclass: domain
#objectclass: top
#objectclass: orclSubscriber
#dc: us
# Adding EUSDBGroup entry
# Modify the memberurl attribute and replace it with your own domain name
#dn: cn=EUSDBGROUP,dc=subarashii,dc=com
#cn: EUSDBGROUP
#memberurl:ldap:///dc=subarashii,dc=com??sub?(&(objectclass=orclService)(objectclass=orclDBServer))
#objectclass:groupofuniquenames
#objectclass:groupofurls
#objectclass:topDid you ever get your questions answered about the realmRoot.ldif file? Did you manage to configure a successful integration of OVD with EUS? I am battling with trying to get Oracle Virtual Directory integrated with Enterprise User Security, but every step I take in Chapter 7 of the OVD manual fails in some way, and the instructions are often vague. I am not sure how to modify the realmRoot.ldif file. Is there any improved documentation on this? I have logged a Service Request, but not getting any help. Any resources or documentation you know of that provides better guidance would be much appreciated. I am way behind my schedule now and this is a very frustrating exercise.
Thanks. -
Getting error message when purchasing app from store.
hi people, whenever i try to download any paid app after filling all the required details of my card im getting error message saying "payment method declined", why so?? can anyone help??
aayushp wrote:
I've been having the same issue. It was all fine until yesterday when I was searching for updates.
Since when have you been seeing this error message?
Last time I checked for an update was about 2 weeks ago and there were no errors reported. However, today I wanted to update iTunes to version 10.7 and decided to use the standalone installer rather than the SU version. Still, I decided to run the MAS Software Update function in order to ensure that my computer had all its software up-to-date and then I get this message. I don't think that me installing iTunes is to blame. Probably, it could be an internet connection problem on Apple's end I am still submitting a bug report to Apple.
Now one question, who is your ISP (internet service provider)? In my case I have Comcast and I am in Florida.
Thanks for your reply! -
Getting error trying to purchase magazine subscription.
I'm getting a "You can't purchase this. You must purchase the app that this item is for before you can purchase the item". Well, this is what I am trying to do. I have the app and now I am trying to sign up for a year subscription. Any help is appreciated.
I have a 1st Gen ipad. 32 gig with 3G.
Thanks.
Brian B.Hi jsmalley,
You have two native ways of getting a scaler datetime object in a DataPlugin, which you can then assign to an "eTime" channel value by value. If you are reading in a datetime string (01/05/1999 12:23 am), then you can use the following syntax:
Set DateValue = File.Formatter.ParseString(StringValue, eTime)
If, alternatively, you are individually reading out the components of the datetime value (Years, Months, Days, Hours, Minutes, Seconds, Milliseconds), then you can use the following syntax:
Set DateValue = CreateTime(Years, Months, Days, Hours, Minutes, Seconds, Milliseconds, Microseconds, Nanoseconds)
In both cases you would assign the datetime value normally, though you have to use the "Set" syntax since you're assigning an object:
Set Root.ChannelGroups(1).Channels(1).Values(1) = DateValue
One footnote here, it is not very efficient to assign channel content value by value. Is there a compelling reason you're not using Blocks and DirectAccessChannels? Also, it's just fine to declare the channel as eR64 and tweak the display format property to be "Time"-- the one drawback with that is that LabVIEW and CVI and MeasurementStudio will not (yet) recognize that channel as a datetime channel, only DIAdem and Excel will.
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
GETTING ERROR RELATED TO TASK LIST IN ORDER CREATION USING BAPI_ALM_ORDER_M
hi all ,
I am using bapi_alm_order_maintain to create a new work order . i am passing task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message " PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
SEEKING YOUR HELP TO REMOVE THIS ERROR.hi all ,
I am using bapi_alm_order_maintain to create a new work order . i am passing task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message " PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
SEEKING YOUR HELP TO REMOVE THIS ERROR. -
Reg an error related to default organization dn
Hi,
We created a Test DC in our environment., dc=test,dc=alpha,dc=com , but the actual default organization dn was dc=alpha,dc=com.
And recently we deleted the Test DC, dc=test,dc=alpha,dc=com, from which we started getting errors related to provisioning profile,
When i tried checking the synchronization status , it is throwing error , cause it is taking the wrong organization dn value,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
at oracle.ldap.util.Subscriber.resolve(Subscriber.java:591)
at ora cle.ldap.util.Subscriber.<init>(Subscriber.java:372)
at oracle.ldap.util.Subscriber.<init>(Subscriber.java:321)
at oracle.ldap.util.RootOracleContext.getSubscriber(RootOracleContext.java:378)
at oracle.ldap.util.provisioning.ProvisioningCmdArgs.computeDefaultValues(ProvisioningCmdArgs.java:243)
at oracle.ldap.util.provisioning.ProvisioningProfile.ProfileHandler(ProvisioningProfile.java:632)
at oracle.ldap.util.provisioning.ProvisioningProfile.main(ProvisioningProfile.java:1019)
Unable to resolve Organization : oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
But if i explicitly specify the organization dn, then it works correctly,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> application_dn="orclApplicationCommonName=sid6854,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com" \
> organization_dn="dc=alpha,dc=com" \
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -4
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164253
orclODIPProfileLastSuccessfulProcessingTime: 20140115164253
Outbound profile status details:
orclLastAppliedChangeNumber: 4799005
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164304
orclODIPProfileLastSuccessfulProcessingTime: 20140115164304
So it seems the DEFAULT organization dn value is still stored in some locaiton from where oidprovtool using the wrong value ?
Could you please let me know how to point out to the correct organization dn ?
Regards,
KarthigaThanks J,,, Your suggestion helped to find another way.
its resolved now..
1. Searched for the entry:
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=test,dc=alpha,dc=com
2. Created test.ldif file with the below entry:
dn: cn=common,cn=products,cn=oraclecontext
changetype: modify
replace: orcldefaultsubscriber
orcldefaultsubscriber: dc=alpha,dc=com
Executed modify command:
ldapmodify -h oidtest.bpweb.bp.com -p 3060 -D "cn=orcladmin" -w XXXXXXXXXXXXX -f test.ldif
3. Again searched for the value and it shows the right one now.
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=alpha,dc=com
4. And checked provisioning and it is working fine now
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=bp,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -2
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120049
orclODIPProfileLastSuccessfulProcessingTime: 20140116120049
Outbound profile status details:
orclLastAppliedChangeNumber: 4808806
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120046
orclODIPProfileLastSuccessfulProcessingTime: 20140116120046
Regards,
Karthiga -
When I attempt to upgrade an app in iTunes for windows, I get an error: "Could not purchase. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later"
I am running the latest iTunes 10.7.0.21 for Windows 7.
This error occurs if I try to either update the app or if I delete it and attempt to redownload.
I have an iPhone and an iPad. I am unable to update the apps or install the apps from within the App Store on iOS.
I do not have an AOL ID, as is a common issue with this type of error.
From what I can tell, my Apple ID account seems fine. I logged in, changed some information, and ensured my credit card is valid and updated.
I can download new apps just fine. I am unable to update or install apps I have purchased in the past.After 30 minutes this morning, no resolution. Then another tech support call this afternoon, 15 minutes in, was escalated to a Tier 2 (Senior) advisor. He said something similar to the above ("this is one of the strangest things I've seen"). He was chatted with iTunes guys and took all my info into the case and was escalating it over to engineering. Said they would be in touch.
So, no solution...yet.
Just to clarify:
iTunes on Windows7: trying to update an existing app, or re-download a prior app, gives the (11111) error. Downloading a new (free) app worked fine.
App Store on iPhone5, iOS 6.0.1: click on UPDATE, switches to INSTALLING...for a second, then switches back to UPDATE. No error message (and nothing in Diagnostic data).
App Store on iPad 3, iOS 6.0.1: same as iPhone 5.
Definitely account related.
I have cleared the store cache, signed out and back in, deleted the credit card data, and re-added, rebooting PC and iPhone...nothing works.
Will post if I hear anything back from Apple. -
I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??
You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Can not purchase on iTunes. Have $ in account but getting errors. Appears trying to use credit card info and credit card processing down. please advise if I have a set up issue or if there is just a technical problem with iTunes store.
hmm i wonder if this is related to the paypal issue...
http://discussions.apple.com/message.jspa?messageID=2234044#2234044
L -
Error :Purchasing info record not found in purchasing organisation
Hi,
after invoice verification with T.Code MIRO,
Goods issue for consumption: with T.Code MB1A
it display error message: purchaseing info record not found in purchasing organisation, pls tell me steps to correct it.
thanks in advance
ramesh.Dear Azis,
Double Click on the serial no of the Component you will get the inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
Please recheck again your components.
Regards,
Shareeq
Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM -
I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
Get "Error in Net Price Calculation" error while creating a Purchase Order
I am getting a error when i try to create a PO. Says "Error in Net Price Calculation item 00010(Please correct)"
I have defined conditon records with the price for the material and have also created info record.However the price in the info record (including currency i.e USDN is different than the one defined in the conditon records currency is USD).
However the price is different from the one defined in info record and in material master.
Where is it picking the price from also is there any way to edit the price in material master or info record ?
Also when i view the condition records by using Tcode MEK1 i get the following error
"Access Pricing Purchasing Z00q 20 contains no fields"
I know Z001 is the access sequence
Can any one tell me wht is this error message about ?
Edited by: Dspsac on Jan 29, 2008 4:31 AMhow can u maintain the condition record as well as info record for a vendor -material in the same time frame
it is not possibe
as info record is also 1 of the condition table
if u have maintained the info record then system is going to fetch the data from there but point top notice is it depends on the validity of record
system fetch the price from info record
and the currency used is fom vendor master -
Getting error while opening Enterprise project type (EPT)
Hello All,
In Project Server 2013, I am getting error while opening any Enterprise project type (EPT) from EPT page or when I am trying ot create any new EPT. How can I troublshoot this, please help.
Thanks in advanceI searched ULS logs and got the below error details.
Exception occured in method 'Workflow.ReadWorkflows' System.Data.NoNullAllowedException: Column 'WORKFLOW_ASSOCIATION_NAME' does not allow nulls. at System.Data.DataColumn.CheckNullable(DataRow row) at System.Data.DataColumn.CheckColumnConstraint(DataRow
row, DataRowAction action) at System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent) at System.Data.DataTable.SetNewRecordWorker(DataRow row,
Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException) at System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID,
Int32 pos, Boolean fireEvent) at System.Data.DataTable....
Let me know your advise on this. -
Please maintain PAN and LST details Error while extending the Vendor in Purchasing Organisation
Dear Gurus,
I have created a import vendor 200100 in finance using FK01 and mentioned LST, CST and PAN No details as "Nil", but when i am extending the Import vendor 200100 to purchasing organization level using T code XKO1, while saving i an getting error as: "Please maintain PAN and LST details" even i checked in J1ID also... Excise data is maintained for this vendor. Please help me to resolve this issue. Many thanks.
Regards,
Siddu MHi,
You have to maintain PAN and LST number in Vendor master. This can be done in two ways :
1. Go to transaction code J1ID. Select Vendor Excise details and click on Edit
Click on
Next Screen
OR
2. Go to Vendor Master
Click on
Next Screen
Click on Sales Tax / Service tax tab
Click on Withholding Tax tab
In case CIN tab is not visible please revert as it comes on the basis of configuration which will be guided to you.
We have said OR because in case it is updated in J1ID it reflects in CIN details or vice versa.
Hope, this solves your issue else revert.
Regards,
Tejas
Maybe you are looking for
-
Automatic payment not working. Why?
I recently changed my credit card information and it looks like the automatic payment is set up. When I go to my skype number information it shows the updated credit card number. However, I received a notice that my number was being shut down for non
-
Acrobat 7 Pro background music
Hi, I've created a multipage PDFusing the page properties of the first page to load a WAV file. My problem is, one of the page has a link to an online video which launches IE and plays the video. However the music in the PDF continues to play, drowni
-
How can I install different apps on different drives?
I've got a SSD as my boot drive so I want to put my most commonly used apps there (eg Photoshop, InDesign...), and the less frequently used apps (Acrobat, Dreamweaver, Media Encoder...) on a second drive. I installed some on my boot drive, but when I
-
Dear All, We created a condition type (Calculation Type : A (percentage) ) and assigned access sequence and maintained in pricing procedure but later decided to change the calculation type to B (Fixed Amount) on this condition type. I am wondering, w
-
I've got a Powermac G4 DP 800 that the disk drive works fine, but when I attach a hard drive to the ATA ribbon, neither drive shows up,not in Disk Utility, not even in System Profiler. Unhook the hard drive, again disk drive works fine. Tried a diffe