Getting error REP-1352: The fonts specified for this report cannot be found

Dear Friends,
I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
I searched internet and found the reason for the issue i.e., as follows.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
Please help me ASAP.
Thanking you.
With Kind Regards,
Senthil Alagu .P.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

Similar Messages

  • REP-1352: The fonts specified for this report cannot be found for the char

    We have migrated all our character reports to oracle 10g - sun solaris machines.
    Now, these reports give us an error....
    REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG
    Does anyone have suggestions.
    desformat - DELIMITED
    mode - character
    Thanks

    Hi,
    Did you check this DocId:203781.1. I think it will help you problem.
    Moreover does your X-server or vnc server on HP work fine.
    In the past with HP version 11.0 there was always problem with HP x-server. just check that your x-server is runinig will ex. x-clock.
    Cheers,
    Hamdy

  • EIONode.xnode the governing library for this node cannot be found

    I have a question concerning the LabView FPGA I/O-Node.
    I want to use an FPGA I/O-node to analyze data coming from an analog input. But everytime I try to insert the I/O-node into my vi, LabView tells me it cannot find the file "EIO_TerminalDirection.ctl", which seems to be needed by "EIONode.xnode", if i got it right.
    Some time ago, i could actually use this node without any problems. I'm not sure, but i think in the meantime i did a mass compile on the whole LabView directory, because LV kept asking me to do so (i had several other problems then, which disappeared after the mass compile)
    If you have any ideas, anything, please post, because i cannot find any hints anywhere and i do NOT want to install the whole environment again!

    Hello choluteca,
    wich LV version do you use? Did you try to repair the LV version? Open system control  under XP (Start/Programme/Systemsteuerung). Switch to entry software and move to National Instruments (repair). Please do this for lv, lv fpga and lv rio and try again the LV FPGA I/O node.
    Kind regards,
    Elmar

  • While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

    DCDIAG /test:dns result is pested here.
    C:\Users\administrator.SUD>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MUM-ADS-01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: Connectivity
             ......................... MUM-ADS-01 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... MUM-ADS-01 passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sud
       Running enterprise tests on : sud.in
          Starting test: DNS
             Test results for domain controllers:
                DC: MUM-ADS-01.sud.in
                Domain: sud.in
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Forwarders/Root hints (Forw)
                      Error: Root hints list has invalid root hint server:
                      a.root-servers.net. (198.41.0.4)
                      Error: Root hints list has invalid root hint server:
                      b.root-servers.net. (128.9.0.107)
                      Error: Root hints list has invalid root hint server:
                      c.root-servers.net. (192.33.4.12)
                      Error: Root hints list has invalid root hint server:
                      d.root-servers.net. (128.8.10.90)
                      Error: Root hints list has invalid root hint server:
                      e.root-servers.net. (192.203.230.10)
                      Error: Root hints list has invalid root hint server:
                      f.root-servers.net. (192.5.5.241)
                      Error: Root hints list has invalid root hint server:
                      g.root-servers.net. (192.112.36.4)
                      Error: Root hints list has invalid root hint server:
                      h.root-servers.net. (128.63.2.53)
                      Error: Root hints list has invalid root hint server:
                      i.root-servers.net. (192.36.148.17)
                      Error: Root hints list has invalid root hint server:
                      j.root-servers.net. (192.58.128.30)
                      Error: Root hints list has invalid root hint server:
                      k.root-servers.net. (193.0.14.129)
                      Error: Root hints list has invalid root hint server:
                      l.root-servers.net. (198.32.64.12)
                      Error: Root hints list has invalid root hint server:
                      m.root-servers.net. (202.12.27.33)
                   TEST: Delegations (Del)
                      Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                      [Missing glue A record]
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000006] Intel(R) PRO/1000 MT Network Connection:
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         gc._msdcs.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         gc._msdcs.sud.in
                   Warning: Record Registrations not found in some network adapters
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 128.63.2.53 (h.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.63.2.53
                DNS server: 128.8.10.90 (d.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.8.10.90
                DNS server: 128.9.0.107 (b.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.9.0.107
                DNS server: 192.112.36.4 (g.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.112.36.4
                DNS server: 192.203.230.10 (e.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.203.230.10
                DNS server: 192.33.4.12 (c.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.33.4.12
                DNS server: 192.36.148.17 (i.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.36.148.17
                DNS server: 192.5.5.241 (f.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.5.5.241
                DNS server: 192.58.128.30 (j.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.58.128.30
                DNS server: 193.0.14.129 (k.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 193.0.14.129
                DNS server: 198.32.64.12 (l.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.32.64.12
                DNS server: 198.41.0.4 (a.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.41.0.4
                DNS server: 202.12.27.33 (m.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 202.12.27.33
             Summary of DNS test results:
    Auth Basc Forw Del  Dyn  RReg Ext
                Domain: sud.in
                   MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
             ......................... sud.in failed test DNS

    Hi Meinolf,
    Please find the IP Details as well as DNS test results.
    C:\Users\Administrator.SCI>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MDCDCDNS
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: Connectivity
             ......................... MDCDCDNS passed test Connectivity
    Doing primary tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
     ERROR: NO DNS servers for IPV6 stack was found
             ......................... MDCDCDNS passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sci
       Running enterprise tests on : sci.com
          Starting test: DNS
             Test results for domain controllers:
                DC: MDCDCDNS.sci.com
                Domain: sci.com
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000009] Microsoft Virtual Network Switch Adapter:
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         gc._msdcs.sci.com
                   Warning: Record Registrations not found in some network adapters
                   MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
             ......................... sci.com passed test DNS
    C:\Users\Administrator.SCI>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : MDCDCDNS
       Primary Dns Suffix  . . . . . . . : sci.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : sci.com
    Ethernet adapter Local Area Connection 7:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : External Internal Virtual Network
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.64.7.1
       DNS Servers . . . . . . . . . . . : 10.64.7.32
                                           10.64.7.35
                                           10.20.33.72
                                           10.20.33.71
       NetBIOS over Tcpip. . . . . . . . : Disabled
    Ethernet adapter Local Area Connection 6:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : TEAM : Team #1
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 8:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
    42A}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
    901}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Please check and revert back for any queries..
    Thanks...
    Deva Self-trust is the first secret of success.

  • Adobe Anchor Service CS4 Error 1612. The installation source for this product is not available.

    Hi,
    I've been trying to install CS4 Design Premium, except that I got this message:
    Adobe Anchor Service CS4
    Error:
    Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
    What is wrong and how do I fix it? I've installed this on my sister's laptop as well, but I've already uninstall it. Could this be the reason why?
    Help appreciated, thanks!

    Contact Adobe Technical Support for CS4 installation issues.
    The problem has nothing to do with the fact that you already installed the same software on your "sister's laptop as well." And although you have already uninstalled it (and hopefully deactivated it as well), please remember that this software is licensed for a single user! You and your sister cannot somehow share the license. 
              - Dov

  • How to manage the font size for webRfc Reports

    Hi All,
    How to manage(increasing or decreasing) the font size for webRFC Reports.
    Regards
    Sri

    Hi,
    Can you try republishing and see ....
    Ideally the font size would be controlled by the <font tag and if you have made changes correctly it should be reflected correctly.
    Check whether the HTML code is also correct.
    Thanks & Regards,
    Vijith

  • Cannot open project: the folder for this project cannot be found cs4

    I am using Encore CS4  and I get the error "cannot open project: the folder for this project cannot be found"
    Having searched the forums I can not find a solution for when the project folder has been deleted.
    Can someone tell me the solution to this issue.

    If you deleted the Encore directory, you cannot fix this.  You'll have to start over.
    Encore creates this folder structure:
    Root or some other Folder
    MyProject.ncor (the Encore project FILE)
    MyProject (the Encore project directory)
    Other Folders for the Encore project (e.g. Cache, Sources)
    You can get the "the folder for this project cannot be found"  in various ways.
    There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name.  You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
    Folder was renamed.  If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
    Encore project file was moved - or Encore directories were moved.  If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
    If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone.  While many of its instructions are inside the project file itself, many are not.  Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

  • What are all the tables used for this report:

    hi
    what are all the tables used for this report:
    report:
    •     <b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
    thanks in advance

    Tables: MSEG, MKPF, MARD.
    FOR REFERENCE SEE TRANSACTION : MB5B.
    Message was edited by: Sharath kumar R

  • What are the tables used for this Report

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.
    9994262112.

    hi
    good
    try with these tables,
    MARA
    KNA1
    thanks
    mrutyun^

  • What r all the tables used for this report. please reply

    hai,
    what r all the tables used for this report.
    report :
    <b>
    •     Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).</b>
    thanks in advance

    hi Ashok,
    Check this out
    http://www.allsaplinks.com/tables.html
    http://www.sapgenie.com/abap/tables.htm
    Regards,
    Santosh

  • What r the tables used for this report.

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.

    Hi Ashok,
    this is easy to do.
    Open Two SAP Screen with same user ID.
    Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
    Trace on ,Run the report in another screen.
    Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
    process,End trace process and Display track process.
    The SQL trace will  give you all the table details which is used in that particular report.
    You have not mentioned about the report name so I have suggested this way.
    regards,nishant
    Please reward if this helps

  • AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

    I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
    C:\Users\Administrator>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = R210_1_2K12
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: Connectivity
             ......................... R210_1_2K12 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... R210_1_2K12 passed test DNS
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : bcas-tbf
       Running enterprise tests on : bcas-tbf.local
          Starting test: DNS
             Test results for domain controllers:
                DC: R210_1_2K12.bcas-tbf.local
                Domain: bcas-tbf.local
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         gc._msdcs.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         gc._msdcs.bcas-tbf.local
                   Warning: Record Registrations not found in some network adapters
                   R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
             ......................... bcas-tbf.local passed test DNS
    IPCONFIG info:
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : R210_1_2K12
       Primary Dns Suffix  . . . . . . . : bcas-tbf.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : bcas-tbf.local
    Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
    ) #36 - Virtual Switch):
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
       Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
       IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 172.16.0.1
       DHCPv6 IAID . . . . . . . . . . . : 335554233
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
       DNS Servers . . . . . . . . . . . : ::1
                                           172.16.0.202
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
    erred)
       Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
       Default Gateway . . . . . . . . . : ::
       NetBIOS over Tcpip. . . . . . . . : Disabled
    I'm unsure of what the problem is or what to do next.  Thank You.

    Disable IPv6 according to Pauls blog:
    Disabling
    IPv6 on Windows 2008
    After disabling run:
    ipconfig /flushdns
    ipconfig /registerdns
    restart the netlogon service or reboot.
    For co-existence from IPv4 and IPv6 see: 
    Configuring DNS for IPv6/IPv4
    Coexistence
    IPv6
    for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
    IPv6 for the Windows Administrator: IPv6 Fundamentals
    Hopefully, that fixes your issue.  Added some links to read in cause you want to.
    If it answered your question, remember to “Mark as Answer”.
    If you found this post helpful, please “Vote as Helpful”.
    Postings are provided “AS IS” with no warranties, and confers no rights.
    Active Directory: Ultimate Reading Collection

  • HELP!  I tunes wouldn't update so I tried to delete and reinstall.  I keep getting a message stating the installation source for this product is not available.  Verify that the source exists and that you can access it.  please help!!

    Help!  Itunes wouldn't update so I tried to delet and reinstall.  I keep getting a message: The instillation source for this product is not available.  Verify that the source exists and that you can access it.  I also get this message:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.  Help I have no idea what that means or how to fix it. 

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How to get total,maximum,mimumum no. of cases for this report

    Description:     Reason For Contact For Customer - This report will provide the total number of cases created for a particular Reason For Contact for a particular Customer with a valid Business Code. This report will also provide the Maximum, Minimum and Average number of cases created for a particular Reason For Contact for that particular type of Customer. This report will take From Date, To Date, Agent Group and Business Code as inputs and generates the report on the screen. All the input criteria will be mandatory.
    See the attachment for the Report.
    NOTE :1) FOR TOTAL,WE HAVE COUNT NUMBER OF CASES CREATED for a particular Reason For Contact for a particular Customer with a valid Business Code
      2) FOR Maximum, Minimum and Average CONSIDER number of cases created for a particular Reason For Contact for that particular type of Customer.
       For this report,I am using 5 tables. In the table ScaseParty  i have C_Bus_Code,C_cust_type coulumns are there.
      I am taking Input Criteria For Business code(ie c_bus_code).suppose business code is 'F0106',I have to get how many cases(means records) are there for a particular Reason For Contact for that Business Code.I AM GETTING THE TOTAL BUT
    for getting maximum,minimum,average , i have to check the C_cust_type For that Business code ,after that I have to take all the business codes for that C_Cust_Type and with in the business codes ,i have to take the maximum number of cases which business code have for that particular Reason for contact For that particular customer type.
    Eg: Reason for contact  Businesscode   customer type   
         Delivery Timing     0306            1        
         Delivery Timing     0306            1
         Delivery Timing     0310            1
         Delivery Timing     0310            1
         Delivery Timing     0310            1  
         Delivery Timing     0310            1  
       In this way i want the result
        Maximum =4 since, for reason for contact(delivery timing) for that customer type(customer type =1),the maximum no. of cases are 4 bcz, business code = 0310 comes 4 times.
    Minimum =2 bcz, business code = 0306 comes 2 times.
       The Problems i am facing
    1)  Since i have taken the input criteria Business code = 'f0106' ,the data filters in the where condition and the getting the number of cases exist for that business code(f0106) for that Contact of Reason data only.But i have to take all the business code exists for that Particular type of customer for that Particular reason for contact for getting the max,min,avg.
      I can't handle max,min,avg in one report since it checks total cases for that Business code only.
      SO,I THINK I HAVE TO INVOKE A SUBREPORT PASSING THE C_CUST_TYPE,iSN'T IT????
    2) iF I TAKE THESE THINGS IN SUB REPORT,HOW CAN I find out the maximum number of case with in the business codes for reason for contact for that particular customer type.
      CONSIDER THE ABOVE EXAMPLES, I AM GETTING 3 CASES FOR CODE = 0306 N 2 RECORDS FOR CODE= 0310 ,hOW CAN I GET mAXIMUM cASES ie 3  BY COMPARING THESE TWO CODES FOR THE DELIVERY TIMING  .  IS THERE ANY FUNCTION??????
    In which way i have to handle this report.
      Regards,
      Vijay
      mail : [email protected]

    Hi Vijay,
    The most efficient way to acheive what you want will be to create a stored procedure or command object in which you have a subquery that calculate your maximum, minimum and average values.
    If you are looking at a solution within Crystal Reports without having to write a SQL Query, then as you said, you can use a subreport that will returns the cases created for a particular Reason For Contact for that particular type of Customer.
    ( You will need to link the subreport to filter the data down )
    Then you can calculate the minimum values in the subreport by using the Minimum function and manually counting the values in a variable, the formula will look like:
    WhilePrintingRecords;
    Shared NumberVar MyMinimum;
    If Minimum({Business Code}) = {Business Code} Then
       MyMinimum := MyMinimum + 1;
    Insert the formula in the details section of the subreport.
    This will count the number of time the minimum Business Code appears in the subreport.
    You can create a similar formula for the maximum values by using the Maximum function.
    As for the average, you can create a summary that counts the number of of Business Code, divided by the distinct count of Business Code, so it will give you the average. The formula will look like:
    WhilePrintingRecords;
    Shared NumberVar MyAverage;
    MyAverage :=
    ( If DistinctCount({Business Code}) <> 0 Then
         Count({Business Code}) / DistinctCount({Business Code}))
    Then you can display the above shared variables on your main report.
    Hope this help!
    Regards,
    Patrick

  • Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

    Hi,
    I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
    the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
    updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
    any help in this regard is highly appreciated
    Thanks,
    Santosh Sutar  

    Hi Satosh Sutar,
    Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
    From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
    And here is an article about updating apps for Office and menifest schema files in the project for your reference:
    How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Blob in the union

    hi. i m trying te use the union with the query which has blob column.The query works fine with out union but with union it gave me error inconsistant data type.

  • What are the steps (High level) needed to implement US Payroll?

    Hi, What are the (high level) steps needed to implement US Payroll? Please provide any relavent URLs for any steps if possible. Thanks, Prabakar

  • Computers won't sleep

    Hi Hope somebody can help me diagnose this problem. I loaded some colour calibration software called Colormunki, by a company called Xrite. Since doing so both my G5 desktop and my Macbook will not go to sleep automatically. There is no uninstall pac

  • ITUNES shows a eq where whats playing usually goes??!?

    Hey All, I have an issue, well not really I just want to know how I did it. In ITUNES - where it usually shows the name of the song and a bar showing where it is in the song etc - it shows a Equilizer that goes with the music. Does anyone know how I

  • Is there a conflict with Mountain Lion and ATT air card?

    I have an ATT USBconnect Momentum 4G air card. Ever since I installed Mountain Lion I am getting an error message that says that something is trying to modify the configuration. Is there a conflict with Mountain Lion and the ATT 4G air card? If so, i