Getting error "The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)" when trying to update on App Store.

I already tried deleting /var/folder ; connecting to my iPhone internet and still getting. How can I fix this?

OK tried everything but had to restore my mac completely to get it work.

Similar Messages

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

The operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)

Good Morning,
I am running into an issue when trying to process an update in the appstore on my macbook pro. I get the following error after clicking on the "update" button:
the operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Any help would be greatly appreciated!

James6 I love you, this problem has been annoying the **** out of me for months!
Thanks! Just turned off Kaspersky and low and behold a multitude of updates available!
Brilliant, good work fella

Software Update App Store 10.8.2 Error - The operation couldn't be completed (NSURLErrorDomain error -1100.)

When trying to run a software update in 10.8.2 from the App Store I recieve the error - The operation couldn't be completed (NSURLErrorDomain error -1100.)
Any help would be appreciated.
Thanks
Anthony

I found the answer by looking over towards the right on this page...to the More Like This section.
The answer is that this indicates a server overload with Apple's App Store server. Give it some time and try again.
Here's the link where this was discussed:
https://discussions.apple.com/message/19553195#19553195

Why am I getting error code 1402 when trying to update adobe reader 10?

Why am I getting error code 1402 when trying to update adobe reader 10?

Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

I am getting error message 3194 when trying to update software.

I am getting error message 3194 when trying to update software.

Security software issues perhaps, look here for help.
http://support.apple.com/kb/TS3694#error3194

I keep getting error message U44M1P2003 when trying to update photo shop elements 12

I keep getting error message U44M1P2003 when trying to update photo shop elements 12 can any one help an OAP Luddite?

See if that can help:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements

Just restore a backup on a new apple imac and get error message 43 when trying to update creative cloud ... is there something to do to suppress the old imac and identify the new one ??

I just move to a new imac following a crash.
Is there something to do to suppress any trace from the old one in order to be able to install creative cloud on the new one ?
I got an error when trying to update CC.
Flo

helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Getting error code U44M1I11 when trying to update Photoshop on Mac

Hi all,
I'm trying to update Photoshop in my Mac running OS 10.9.5, and I'm getting the following error in the error log:
Photoshop Camera Raw 8.7.1(CC)
Another instance of deployment is already running. Error Code: U44M1I11
Adobe Photoshop 2014.2.2
Another instance of deployment is already running. Error Code: U44M1I11
It doesn't matter if if use Cloud updater, or the Photoshop updater. I've rebooted my machine and have no other things running when I'm doing the update. I've also uninstalled Photoshop completely and started a fresh install, but the update still fails with the same errors in the error log. I've also tried updating one component at a time, i.e., Camera Raw or Photoshop - and I get the same error, but this time, only for the component I've tried to update.
Any ideas on how I can get past this and update Photoshop?
Thanks!
-JF

See this thread https://discussions.apple.com/message/16693349#16693349

Getting error code -5000 when trying to update OS ?

How do I fix error 5000? I am trying to update the OS and get this message when iTunes starts the backup.

See this thread https://discussions.apple.com/message/16693349#16693349

Keep getting error message 2738 when trying to update to 7.3.1

Hi folks I need some help... I keep getting an error code 2738 when I try to upgrade to 7.3.1.... I tried to uninstall itunes thinking that if I had a clean slate then it would allow me to upgrade.... and that went okay I then tried to unistall quicktime, and I keep getting unexpected error code 2738 and it wont let me delete quicktime. I then tried to reinstall Itunes/quicktime and it still gives me the same error code 2738 and shuts down after the quicktime part of the install is suppose to happen. Any help is greatly appreciated....

Hi folks I need some help... I keep getting an error
code 2738 when I try to upgrade to 7.3.1.... I tried
to uninstall itunes thinking that if I had a clean
slate then it would allow me to upgrade.... and that
went okay I then tried to unistall quicktime, and I
keep getting unexpected error code 2738 and it wont
let me delete quicktime. I then tried to reinstall
Itunes/quicktime and it still gives me the same error
code 2738 and shuts down after the quicktime part of
the install is suppose to happen. Any help is
greatly appreciated....
Okay I did a little playing around and got my situation resolved.... I went and installed the windows uninstaller program....http://download.microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1B D/msicuu2.exe and I clicked on remove quicktime.... I then removed the apple software update in the control panel using the add/remove programs feature, and also removed apple mobile support program in the add/remove list. restarted computer and re downloaded the new itunes w/quicktime file... It installed correctly this time. Hope this helps.... Thanks

I keep getting error message 4002 when trying to update Genius

I am trying to create a Genius list using the update Genius on the Store but I keep getting error message 4002. I have deleted and reinstalled iTunes but the same thing keeps happening.

See if that can help:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements

I keep getting error message (-1) when trying to update my software

I'm trying to update my 3rd generation ipod to the latest software, and everytime I try, it gets all way to the end and says "Could not be restored. An unknown error occured (-1)." This iPod is currently running version iOS2.2.1. Please help....it's driving me crazy! I'm trying to update to 4.2.1.

Not a good error.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
"may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I'm getting error code -54 when trying to connect to iTunes store...

Hello,
I have been receiving the following message code all week when trying to connect to the store:
"iTunes could not connect to the iTunes Store, An unknown error occurred (-54).
Make sure your network connection is active and try again"
My internet connection works fine.
Some other strange things that are happening on my MBP with leopard, is that Virus Barrier flashes up IP address after IP address trying to connect to some 5 digit port time and time and time again when I use Skype or any P2P sharing software – rendering them pretty much unusable (a DoS attack maybe?).
I had started this thread beforehand, I don't know if they are related with the iTunes error code mentioned above.
http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
Any advice much appreciated.

I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

I am getting error code 1328 when trying to update

I installed Adobe Acrobat Pro on a Windows 8.1 OS using a disc purchased.
Install is fine. I get a notification that there is an update available, however when downloading and attempting the update, I receive update 1328, "Error applying patch to [filename]. It's likely that something else updated the file, and the patch can't modify it. For more information, contact your patch vendor."
I've uninstalled, and re-installed several times, with no luck.
Any thoughts??
Thanks in advance

Moving this discussion to the Acrobat Installation & Update issues forum.
Udfly81 I would recommend reviewing Update errors | Windows which discusses error 1328.

Getting error "The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)" when trying to update on App Store.

Similar Messages

Maybe you are looking for