Getting error : This operation is not supported on a report server that runs in native mode

Hi,
I have installed SQLServer2008 Standard Edition in my system.
Using SSRS 2008.
I have added
http://<serverName>/ReportServer/ReportService2006.asmx as web reference in my project.
If i consume any method in ReportingService2006 am getting below error .
This operation is not supported on a report server that runs in native mode. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native
mode.
How to solve this problem?
Thanks,
Thangakumar

Hi Thangakumar,
In Reporting Services Web service, there are two endpoints available for managing objects on a report server, ReportServer2005 and ReportServer2006. The
ReportService2005 endpoint is used for managing objects on a report server that is configured for native mode. The ReportService2006 endpoint is used for managing objects on a report server that is configured for SharePoint integrated mode. From you description,
your Reporting Services runs in native mode, but ReportService2006.asmx is used for SharePoint integrated mode. If you need to call Reporting Services Web service in native mode, please change the address to:
http://<serverName>/ReportServer/ReportService2005.asmx
If you need to call Reporting Services Web service in SharePoint integrated mode, please change the address to:
http://<Server Name>/<Site Name>/_vti_bin/ReportServer/ReportService2006.asmx
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/ms155398(v=SQL.100).aspx
Thanks,
Albert Ye

Similar Messages

I get error "This operation is not permitted" after creating form and opening it in Reader...

Hi,
I am very frustrated with this form I have created. I created the form in Acrobat 8 but could not get it allow changes to be saved until I chose to "distribute" form. I did that and now have a form that can be caved once filled out however when you open it you get the error "This operation is not permitted".
From reading some other posts, I have done the following:
Checked security settings and they do not fix it.
Checked that all fields were form fields and they seem to be.
Checked restrictions listed in purple bar and there were none.
Checked for "unembedded" fonts and there were none.
I think using Acrobat 9 might help me but I do not want the expense as I only use Acrobat for forms like this once a year.
Does anyone know what is going on here and can maybe help?
Thanks,
Sean

I'm having the same problem. Have you already found a solution?

HT4101 When I plug my USB adaptor into my iPad 2 and 3 I get error this accessory is not supported by iPad

I have a apple USB adaptor and I keep getting the error accessory not supported

On the iPads...
1: Make sure the Dock Connectors are Clean and Free of Lint.
2: Try a different Cable.
3: Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Error "This class does not support SAAJ 1.3" in oim 11g

hai all,
i have error "This class does not support SAAJ 1.3" when i running create user.
i already tried added in startWeblogic.cmd and in setDomainEnv.cmd :
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl and -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
step like this site (http://blog.xebia.com/2009/07/14/jax-ws-cxf-and-saaj-on-oracle-weblogic-103/)
i already too set path for = saaj-impl-1.3.jar but the error still same "This class does not support SAAJ 1.3"
i used weblogic 10.3.5, i'm generate soap message used rt.jar (import javax.xml.namespace.QName; etc)
any idea to solving this error ?
thank's
darvesth
Edited by: darvesth on Mar 19, 2013 4:08 AM

thank you darvest, i follow your step before.
but i added any steps after that.
1. include saaj-impl-1.13.jar and saaj-api.jar in project adapter
2. add parameter "SOAPConstants.SOAP_1_2_PROTOCOL" in line code, MessageFactory mf= MessageFactory.newInstance()
-> MessageFactory mf= MessageFactory.newInstance(SOAPConstants.SOAP_1_2_PROTOCOL);
so, my problem already resolve..
i hope this solution usefull to resolve our problem, darvest.
thanks,
Tim BENGA

HT201342 I have just opened an icloud email address and am unable to open ANY of the messages in my INBOX. I keep getting the message, "Cannot open this item. This operation is not supported until the entire message is downloaded. Download the message and

I have just opened a new icloud email address and am unable to open ANY of the messages in my INBOX. For each item I get the message "Cannot open this item. This operation is NOT supported until the entire message is downloaded. Download the message and try again". I now have no clue what I need to do to open these items. Help please.

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--? on OEL 64 bit host for OEL 64 bitguest

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
I am using entire Oracle Stack..OEL, ORACLE VBOX
Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6 x86-64 bit) .
and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
I am struck and unsure how to proceed . I appreciate any help regarding this.
I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?

Hi
Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
Edited by: 891882 on Oct 28, 2011 1:21 PM

I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

This operation is not supported in WCF Client plz help

Hi
I am new to WCF and would like to create duplex (TCP binding) WCF service as well as WCF client.
see the below code. When I run the application in WCF client it on every operationcontract "This operation is not supported in WCF Client"
[ServiceContract(CallbackContract=typeof(ICalculatorDuplexCallback))]
public interface ICalculatorDuplex
[OperationContract(IsOneWay = true)]
void Clear();
[OperationContract(IsOneWay = true)]
void AddTo(double n);
[OperationContract(IsOneWay = true)]
void SubtractFrom(double n);
[OperationContract(IsOneWay = true)]
void MultiplyBy(double n);
[OperationContract(IsOneWay = true)]
void DivideBy(double n);
public interface ICalculatorDuplexCallback
[OperationContract(IsOneWay = true)]
void Equals(double result);
[OperationContract(IsOneWay = true)]
void Equation(string eqn);
namespace DuplexWCFService
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]
public class CalculatorService : ICalculatorDuplex
double result;
string equation;
ICalculatorDuplexCallback callback = null;
public CalculatorService()
result = 0.0D;
equation = result.ToString();
callback = OperationContext.Current.GetCallbackChannel<ICalculatorDuplexCallback>();
public void Clear()
callback.Equation(equation + " = " + result.ToString());
result = 0.0D;
equation = result.ToString();
public void AddTo(double n)
result += n;
equation += " + " + n.ToString();
callback.Equals(result);
public void SubtractFrom(double n)
result -= n;
equation += " - " + n.ToString();
callback.Equals(result);
public void MultiplyBy(double n)
result *= n;
equation += " * " + n.ToString();
callback.Equals(result);
public void DivideBy(double n)
result /= n;
equation += " / " + n.ToString();
callback.Equals(result);
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding name="tcp_secure">
</binding>
</netTcpBinding>
</bindings>
<services>
<service name="DuplexWCFService.CalculatorService">
<endpoint address="" binding="netTcpBinding" bindingConfiguration="tcp_secure"
contract="DuplexWCFService.ICalculatorDuplex">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
<endpoint address="mex" binding="mexTcpBinding" bindingConfiguration=""
contract="IMetadataExchange" />
<host>
<baseAddresses>
<add baseAddress="net.tcp://IRFAN-TSDD:8733/DuplexWCFService" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="">
<serviceMetadata httpGetEnabled="false" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>

Hi,
The following is a list of features not supported by WCF Test Client:
Types:
Stream,
Message,
XmlElement,
XmlAttribute,
XmlNode, types that implement the
IXmlSerializable interface, including the related
XmlSchemaProviderAttribute attribute, and the
XDocument and
XElement types and the ADO.NET
DataTable type.
Duplex contract.
Transaction.
Security: CardSpace , Certificate, and Username/Password.
Bindings: WSFederationbinding, any Context bindings and Https binding, WebHttpbinding (Json response message support).
For more information, you could refer to:
https://msdn.microsoft.com/en-us/library/bb552364%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396#sectionToggle19
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5787cd27-d8ae-47a3-8281-aa86e56dea0b/how-to-test-duplex-service-using-wcftestclientexe-tool?forum=wcf
For
testing WCF duplex service:
http://stackoverflow.com/questions/8154102/how-do-i-test-my-wcf-duplex-service
Regards

Create a SharePoint 2013 Appplication in C#,Error:This operation can be performed only on a computer that is joined to a server farm

I want to create a sharepoint application in C#:
SPFarm CurrentFarm = SPFarm.Local;
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
webAppBlder.UseNTLMExclusively = true;
webAppBlder.AllowAnonymousAccess = false;
webAppBlder.UseSecureSocketsLayer = false;
SPWebApplication webApp = webAppBlder.Create();
webApp.Provision();
It's create a new application succeed,but when I view the site there is an error:
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
How can I fix this issue?
ps:I had create some new application in sharepoint web site.It's all fine without any issue.
The sharepoint server,sqlserver and the programs in the same machine.
Besr regards

Hi,
I think below line is causing the error -
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
can you put that line within a try catch and see that causes an exception. If so, you might try as below-
SPSecurity.RunWithElevatedPrivileges(delegate()
webAppBuilder = new SPWebApplicationBuilder(CurrentFarm);
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Why does my iphone give me this error "This accessory is not supported by iphone" on my iphone 4?

Just yesterday went to my local Costco and bought myself a Logitech docking station and it was a great deal. On the side of the box it lists the devices that it will support. The iPhone 4 is listed. When I hooked it up and plugged my iphone 4 into it. This error come up "This accessory is not supported by iPhone". First, I was thinking what a way to get customers to buy and end it will end up not working. Buyer Beware.
Apple should give us a update that will fix this software error on our iPhone's. There are millions of iPhone's out there and not having any problems using accessories and docking stations. Not fair to the rest of us out there that want the same benefit to the iPhone.

This has nothing to do with Logitech. I have tried other products in the past year and a half. My iphone has been giving me this error since iOS 5. Something in the software is preventing us to use these aftermarket equipment. My sister in laws iphone 4 has the iOS 6 and she has a JVC stereo in her home and has no problems or errors on her iphone 4.
My terminals are clean. I have given my iphone a factory reset and a restore. My iphone shouldn't be limited to uses of other products. In the near future I am planning on getting a new cellphone. I don't want to switch from apple.
Apple's next update for iPhone should fix this for us. So, we can use our docking stations.

My apple camera connector comes up with an error "this accessorty is not supported.." on my iPhone 4 now that I have updated to iOS7, previously it worked fine. Any suggestions?

I have an iPhone 4 and a camera card connector (bought from apple) which worked fine together, then I updated to iOS7 and now when I plug it in it says " This accessory is not supported by this iPhone."
Any suggestions on how to get my certified apple camera connector working with my iPhone again would be greatly appreciated. I really wish I hadn't updated to iOS7....
Thanks

You need to update iTunes to 11.1 on your PC

Web Deploy error - "This method is not supported by this class"

I have an MVC project which I am trying to deploy to one of our internally-hosted web front end servers via a TFS build process. Our server hosts the MS Deploy service, and other solutions deploy without problems to the same box. The parameters for the build
process are as follows:
/p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=https://<server>:8172/msdeploy.axd /p:DeployIISAppPath="<internal.site.com>" /p:username=<username> /p:password=<password>
/p:IncludeIisSettingsOnPublish=false /p:AllowUntrustedCertificate=True /p:OutputPath=bin\ /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=11.0
The error message I receive at the point the build reaches the deployment activity is:
Web deployment task failed. (Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.)
Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.
The request was aborted: The request was canceled.
This method is not supported by this class.
We've found
this StackOverflow post which describes the same error we're experiencing, however the suggested solution is something we already do in our server configuration, so this doesn't resolve the issue for us.
Has anyone seen this error before, or is able to make any suggestions why it is happening?

Hi Matt,
You have to have a look in the build log then copy the command that is under Run MSBuild node and executed it on the build agent.
You should find something like below:
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe /nologo /noconsolelogger "C:\Builds\....sln" /nr:False /fl /flp:"logfile=C:\Builds\...log;encoding=Unicode;verbosity=normal" /p:SkipInvalidConfigurations=true /p:CreatePackageOnPublish=true /p:DeployOnBuild=true /p:SkipExtraFilesOnServer=True /m /p:OutDir="C:\Builds\...\bin\\" /p:Configuration="DEV" /p:Platform="Any CPU" /p:VCBuildOverride="C:\Builds\....sln.Any CPU.DEV.vsprops" /dl:WorkflowCentralLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;BuildUri=vstfs:///Build/Build/31630;IgnoreDuplicateProjects=False;InformationNodeId=14;TargetsNotLogged=GetNativeManifest,GetCopyToOutputDirectoryItems,GetTargetPath;LogProjectNodes=True;LogWarnings=True;TFSUrl=http://...-tfs:8080/tfs/...;"*WorkflowForwardingLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;" /p:BuildId="aa2d3857-27e9-4854-b44f-4ca625ccd786,vstfs:///Build/Build/31630" /p:BuildLabel="..._2015.02.27.2" /p:BuildTimestamp="Fri, 27 Feb 2015 11:16:41 GMT" /p:BuildDefinition="..."
Daniel

I have tried to convert and this is what I get for an answerFile does not support conversion? How can that be Its a PDF??

File does not support conversion? How can that be Its a PDF??

Hi vang,
Kindly refer this FAQ link:What file formats does Adobe PDF Pack support?
Regards,
Florence

SP 2013 - Error: This operation can be performed only on a computer that is joined to a server farm

Hello Community!
I am working with SharePoint 2013 and I built a farm inside the firewall. Then a decision was made to move the two WFE's to the DMZ. Since that time, whenever I try to access the site collections, I get the error below.  Other information: All
the web applications are on port 80, but I'm not having any problem with accessing Central Administration which is on port 8080; the network team did screw up the DNS originally, but I'm told it's correct now; the two WFE's servers show in my Manage servers
on the Farm interface 2X, once with the server name, once with the fully Qualified Domain Name, the ones with the FQDN shows a Services Running status of Not Configured.
Has anyone else ever seen this error and if so please provide guidance and instruction for fixing the error.
Thanks!
Tom
Server Error in '/' Application.
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server
to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code.
Exception Details: System.InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server
to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified
using the exception stack trace below.
Stack Trace:
[InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration
database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   Microsoft.SharePoint.Utilities.SPUtility.AlternateServerUrlFromHttpRequestUrl(Uri url) +262
   Microsoft.SharePoint.Administration.SPAlternateUrl.GetContextUri(HttpContext ctx) +385
   Microsoft.SharePoint.SPAppRequestContext.InitCurrent(HttpContext context) +1013
   Microsoft.SharePoint.SPAppRequestContext.get_Current() +175
   Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken,
SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) +400
   Microsoft.SharePoint.SPRequestManager.GetContextRequest(SPRequestAuthenticationMode authenticationMode) +120
   Microsoft.SharePoint.Administration.SPFarm.get_RequestAny() +370
   Microsoft.SharePoint.SPLanguageSettings.GetGlobalInstalledLanguages(Int32 compatibilityLevel) +39
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.RefreshInstalledLocales() +103
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.Initialize() +130
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.System.Web.IHttpModule.Init(HttpApplication app) +873
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +582
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +384
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +397
[HttpException (0x80004005): This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To
connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +646
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +771
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18010
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
According to your description, my understanding is that you got an error when you moved your SharePoint.
This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Occasionally my iPad 2 does not download POP3 emails with the error "This message has not been downloaded from the server"

The error is "This message has not been downloaded from the server". I used to get this sometimes on my iPhone 3G too. The messages can be downloaded by a PC client or GMail or another type of smartphone. The
Chris

My question, which I thought was obvious, was has Apple got a workaround for this obvious error in their IOS email client. It hasn't been fixed and it's about time it was.
The fact that this problem :-
1. Manifests itself on both iPhone and iPad devices
2. Does not show up on Windows clients (Outlook 2007, Outlook 2010, Windows Live Mail, Becky 2)
3. Does not show up on web clients (GMail, Pobox, Hotmail)
4. Does not show up on MacOS clients
5. Does not show up on Android clients (Mail, Touchdown)
Leads to the inevitable conclusion that the problem is not device related (so I agree with you there) but is client / platform (Mail or IOS) related. The fact that more research on this forum shows that this issue has been around since IOS 1.0 days corroborates this conclusion.
I do not agree with you presumption that the issue is with the message, all the evidence above refutes this.
So here I am on the official Apple discussion forum seeking enlightenment and assistance from the combined knowledge of the assembled technorati. And quite frankly your terse, bad tempered message falls way short. If there were an "unhelpful answer" button on your message I would have pushed it.

Getting error : This operation is not supported on a report server that runs in native mode

Similar Messages

Maybe you are looking for