Getting Error thru exeution of a report F.44
Dear Experts
At the time of executing the report through F.44 ( Vendor Interest Scale ) getting the error "Error table for
vendor interest scale from 30.05.2009 No List Generated.
Immediate feedback is needed.
Thanks - Vg.
Hi Viral,
I am getting the same error as you faced I need your help.please give me solution for this.
Many Many Thanks
Similar Messages
-
Getting error while schedule a webi report
Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
RegardsHi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj -
Getting error while refreshing the Webi report
Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H -
Getting error when schedule a webi report
Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
RegardsHai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/ -
Iam getting error while running the xml report
Hi,
I designed the template by using subtemplate.If I run the concurrent program I am getting error like
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Thanks,
Bhuvana.Whats the error?
Maybe post the log file so we can see the full file -
i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well -
I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434 -
Getting error when refreshing the WebI report
Hi,
I am building WebI reports using a universe which is constructed over a BI cube.
Initially I am building the report and uploading it into CMS.
When I am importing the report from CMS and refreshing it, I am getting an error
"A database error has occured. The database error text is: A runtime exception has occured. (Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
What could be the reason for this kind of behaviour?
The version of BO is 3.1.Hi,
Your answer was really helpful, and it worked upto some extent. I have updated the lisence key and the following error is no longer coming.
"(Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
But now I have a new error popping up when ever I import a report from CMS and refreshing it.
The error is "A database error occured. The database text is: The supplied XML is not valid.[SYMTNKEY].[LEVEL 01]. (WIS 10901)." -
Getting error while refreshing a Webi reports for a specific universe
Hi Experts I am trying to refresh a WEBI Report but getting this error: A database error occured.
The database error text is (cs)"Specified network layer is invalid" Previously this was working fine...
from today itself I am getting this error
My DB is DB2 DB Drivers: DB2 V9 ->JDBC DriverTest Connection is always successful...
Not sure whats wrong -
Getting error while drill through a report
Hi,
I am getting this following error when I drill through a report and the OFA application freezes. I hope this is problem with the OFA installation.
(MXMSERR) S does not exist in any attached database.
What does it mean and what could be the problem ?
Please let me know how to rectify the problem?
Thanks
MurugesanHi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H -
Discoverer 3.1.25: getting error ORA-06550 when scheduling report
Hello,
we are still using the Discoverer version 3 (release 3.1.25). I know that this version is out of support, but that doesn't harm use from using it...
The Discoverer has been working fine for the last couple years. At the beginning of every month the same already defined reports are getting generated. But with the beginning of the year 2010 we are getting the error:
ORA-06550: line 1, column 93:
PLS-00201: identifier 'EUL$BATCH_PACKAGE0100112082923.RUN' must be declared
ORA-06550: line 1, column 93:
PL/SQL: Statement ignored
ORA-06512: at "SYS.DBMS_JOB" line 79
The numbers "0100112082923" after the identifier "EUL$BATCH_PACKAGE" specify the date and time:
082923: 08 hour, 29 minutes, 23 seconds
0100112: 010 year, 01 month, 12 day
The reason of that error is that the mentioned Package/Packagebody EUL$BATCH_PACKAGE*0*100112082923 doesn't exist in the database. But as a matter of fact the Package/Packagebody 'EUL$BATCH_PACKAGE100112082923 does exist. The Discoverer creates the Package/Packagebody without the "0" after the identifier "EUL$BATCH_PACKAGE" in the database, but wants to use the Package/Packagebody with the "0" after the identifier "EUL$BATCH_PACKAGE". Seems like a bug to me - does anybody have the same problem?
Until the year 2009 the year was specified with just two digits (09) - now the year seems to get specified with 3 digits (010) - but in the database just two digits are used. Is there any property table or button where this gets defined?
Any help will be appreciated!Seems like if I have found the bug by myself...
In the procedure SubmitJob(...) of the package EUL$BATCH_REPOSITORY the name of the scheduled procedure gets generated with the hardcoded string
"EUL$BATCH_PACKAGE0". The zero after "PACKAGE" is only correct when the year ends with one digit (e.g. 2001, 2002, ..., 2009). When shortening the
string to "EUL$BATCH_PACKAGE" everything works fine again...
Rgds -
User is getting Error while opening a Discoverer report::Model Manipulation
Hi,
I am stuck with a peculaiar error as reported:
While opening a Discoverer Report its giving Error:
Model manipulation via state object.Server writes and pass through reads can only be made on objects attached to the model
instance of
oracle.disco.model.corbaserver.ScheduleRunWorkbookInfoImpl made state from:removed from
oracle.disco.model.corbaserver.schedule.ScheduleRunWorkbookInfoImpl
Kindly any help will be benefitial for me.
Thanks and RegardsPl post details of OS, database and Discoverer versions. Pl detail the steps to replicate this error. This MOS Doc may be helpful
734850.1- Error "Failed to Find Workbook ParameterValue.." When Trying to Edit Scheduled Discoverer Workbooks
HTH
Srini -
Getting error data when navigate child report.
hi,
i am unable to get the current session data when i navigate to the child report from mother report.....
ex,when mother report has data for 12/01/13(date prompt) then after navigation data is showing from 10/01/2013 to last date.....not just 12/01/2013.
My req is when i select particular date in mother report (Main Report), then when i click any column the child report will also display the same date data.
thanks for your help.
Regards
ZakeerMake sure you used same date column in Both Reports and in second Report Make Date column as "Is Prompted"
-
Getting error on printing of crystal report
hi..
on clicking print button using active x i got this error why this error comes
http://i51.tinypic.com/fz2bk0.png
thanks in advancemy cs file look like this
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class _Default : System.Web.UI.Page
ReportDocument crReportDocument = new ReportDocument();
//'CrystalReport1' must be the name the CrystalReport
TableLogOnInfo crTableLogOnInfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
//Crystal Report Properties
CrystalDecisions.CrystalReports.Engine.Database crDatabase;
CrystalDecisions.CrystalReports.Engine.Tables crTables;
CrystalDecisions.CrystalReports.Engine.Table crTable;
protected void ConfigureCrystalReports()
string Server1 = ConfigurationManager.AppSettings["Server"];
string user1 = ConfigurationManager.AppSettings["Userid"];
string Password1 = ConfigurationManager.AppSettings["Password"];
string DataBase1 = ConfigurationManager.AppSettings["DataBase"];
crReportDocument.Load(Server.MapPath("InvoiceReport.rpt"));
crConnectionInfo.ServerName = Server1;
crConnectionInfo.DatabaseName = DataBase1;
crConnectionInfo.IntegratedSecurity = false;
crConnectionInfo.UserID = user1;
crConnectionInfo.Password = Password1;
crDatabase = crReportDocument.Database;
crTables = crDatabase.Tables;
foreach (CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
crTableLogOnInfo = crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
crTable.ApplyLogOnInfo(crTableLogOnInfo);
Session.Add("h1", crReportDocument);
protected void Page_Init(object sender, EventArgs e)
if (Session["h1"] == null)
ConfigureCrystalReports();
CrystalReportViewer1.ReportSource = Session["h1"];
CrystalReportViewer1.RefreshReport();
CrystalReportViewer1.Visible = true;
protected void Page_Load(object sender, EventArgs e)
is that i have to change anything...? -
Getting Error in Report painter
Dear All ,
i am getting an error after i execute a report in report painter,
Getting the following errors,
Characteristic Ledger does not exist
Characteristic Record Type does not exist
Characteristic Ledger does not exist
Message no. GR655
Diagnosis
The characteristic must (message type E) or should (message type W) be addressed in the report definition. This means that a set must/should exist for the characteristic in the definition of the report rows, report columns, or report selection.
For performance reasons, it is important that you limit the value ranges of those key fields located at the start of the database key as much as possible.
Procedure
Define a set for this characteristic in the report.
Note
In Controlling (Table CCSS), different characteristics (cost center, order, project, etc.) are portrayed internally with a common technical characteristic, "Object". In reports, either a specific characteristic such as cost center must be used, or the characteristic "Object" must be used directly. If this is not the case, an error message appears saying that the "Object" characteristic is missing.
regards
ManHi,
define a ledger / record type, (eg in the general data selection).
Best regards, Christian
Maybe you are looking for
-
Can I have more than one account to buy music ?
Hello, This is my first time here and not even sure how to retreve the answer lol so will ask that maybe someone can e-mail me at '[email protected]' with it ? I have a gift cert from 'Bose' that I have 15 songs left on it but am also getting a gift
-
While activating Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error
Dear all While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error Error when writing routines Message no. RSAA561 Error while activating transformation Message no. RSTRAN510 Error when activating Transformation 0N7SM
-
I have an append query that takes over an hour to run (which is fine), but when I use vba and call this append query it will never run. I have 3 of these that are very similar. Here is the query itself. The select version of this query takes appr
-
Workflow for Reservation in MM
Hello Gurus, My client need to have one system of approval for the reservation of material in SAP. The SAP don't have one workflow standard to do this, i have to develop the workflow. My question is how i stop the process of reservation? Anyone alrea
-
Create pdfs that perform calculations
Hello. I would like to find a product in order to create beautiful pdf files, with text fields where you can enter numbers and perform various calculations with them. I can attach a pdf like the one I would like to create. Which product should I buy?