Getting error when attempting to connect through infiniband interface

Hello,
I launched coherence with -Dtangosol.coherence.localhost=<infiniband address> on two machines. I get a message saying that one machine connected to the other, but no partitions are transfered. Instead I get a run time exception on my main thread. The code works fine, I tried with the ethernet address and the code ran.
I also tried the multicast test on these two machines through their respective infiniband interfaces and I got messages being transfered.
Any thoughts on something I might have missed?

Hi Armando,
Can you please post the Coherence as well as multicast test logs from both nodes as an attachment to this thread.
thanks,
mark

Similar Messages

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

"Unknown Error" when attempting to publish through Muse

I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
Any help in the right direction is appreciated!

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Getting an error when attempting to connect Skype

Hello. I am using Windows Vista 32 bit
I am attempting to connect to Skype through my microsoft account, and I am getting the following message.
"Sometimes the internet gets a bit sleepy and takes a nap. Make sure it’s up and running then we’ll give it another go."
I have checked my Internet Explorer LAN settings and have not been able to determine an issue. My IE is version 9.0.8112.16421
If there is a clue, Yahoo Messenger has also recently stopped working.
Please help!
Solved!
Go to Solution.

I just fixed this myself. I went into Internet Explorer, the went to Internet Options - Advanced - enabled 'Use TLS 1.0'

Getting error when attempting to install CS5.5 on Windows 7 64 bit

Hi, I'm receiving the errors below when attempting to install Adobe CS5.5, but only for Adobe Acrobat and some other components of the suite. I am now trying to install just Acrobat Pro through the Suite and it fails. The error log is below. Please let me know what the issue is.
Thanks
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 3 error(s), 3 warning(s)
WARNING: DS013: Payload {D8D2B468-8342-411A-8760-BCC362C3408F} CS5.5 Master Collection 5.5.0.0 is already installed and the session payload {D57FC112-312E-4D70-860F-2DB8FB6858F0} CS5.5 Master Collection 5.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW066: OS requirements not met for {3EE734CB-F7AD-4691-9712-066E9FEC3E62}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Run the cleaner tool and try again. Also uninstall any existing, more modern versions of Flash Palyer and Acrobat/ Adobe Reader on the system.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Getting error ORA-12705, while connecting through Sql*Plus?

Hi TOM,
While connecting ORACLE Database through Sql*Plus / via through Application. We getting error called "Error while trying to retrieve text for error ORA-12705".
How to re-solve this one?
Thanks & Regards,
Senthil K Kumar.

Maran,
check the registry NLS_LANG in the registry rename it as suggested by burleson and add a new entryCurrently, it was more suggested by Maxim ;-)
Nicolas.

Dreamweaver CS6 - Get error when trying to connect to database..

When trying to connect to a database in Dreamweaver CS6 - I keep getting this error... 'An unknown error has occurred'. I've exhausted all google hits.. and have tried EVERY combination possible during the past 4 years... SOS - please help me.. Thanks!

Moving it yet again to the correct Dreamweaver forum: Developing server-side applications in Dreamweaver.
Usually, "an unknown error has occurred" means that there's something wrong with your testing server definition. Have you followed the instructions here: http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html ?

Resolved - Getting error when 'Click on Connect' in a Game

Hi there,
I have recently installed Windows 10 TP. and I have purchased a game Modern Combat 5 from store. And I am trying to connect to Facebook using embedded option given in the game so that my game data will be restored from previous games.
However I am getting error as below when Click on Connect:
<noscript><meta http-equiv="refresh" content="0; URL=/dialog/oauth?client_id=523631134360162&amp;redirect_uri=https%3A%2F%2Fwww.facebook.com%2Fconnect%2Flogin_success.html&amp;response_type=token&amp;display=page&amp;scope=email%2Cuser_birthday&amp;_fb_noscript=1"
/></noscript>
"Given URL is not allowed by the Application configuration.: One or more of the given URLs is not allowed by the App's settings. It must match the Website URL or Canvas URL, or the domain must be a subdomain of one of the App's domains."
Attached the snip below:
Regards
Nag

Hi ,
you can check it in the return codes of the function that caused the error.
Otherwise, it's a "communication error" - which could be just about everything that can cause a communication to break ,it needs EXCEL to read some info, but EXCEL is closed prematurely. So there is some kind of OLE or RPC communication going on in the background,which should not be interrupted.
Please check
Meaning of the SAP return codes:
: 1) Gateway errors:
: 221: Error in CPIC-SS 222: Storage bottleneck
: 223: Network read error 224: Network write error
: 225: Invalid request 226: No connection yet
: 227: Gateway process terminated 228: Shared-Memory problem(read)
: 229: Shared Memory problem(write) 230: No free LU
assign point if helpful answer!

ORA-06413 Error when trying to connect through Win ME.

When I am trying to connect to Oracle 8.0.4 database on SCO
Unixware 7.1.0 though SQL*Plus on Windows ME. It gives error ORA-
06413: Connection not open. But it allows to connect through
Windows 95/98/NT. What may be the reason?

yes it does list wham3.....here's the output of lsnrctl services wham3
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-SEP-2005 15:53
:34
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=juipinj.corp.whamtech.co
m)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=wham3)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service " wham3.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:46 refused:0 state:ready
LOCAL SERVER
Service "wham3XDB.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: JUIPINJ, pid: 2024>
(ADDRESS=(PROTOCOL=tcp)(HOST= JUIPINJ.corp.whamtech.com)(PORT=1073))
Service "wham3_XPT.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:46 refused:0 state:ready
LOCAL SERVER
The command completed successfully

Getting error when attempting to import jpegs into Premiere Elements

When attempting to import still images (jpegs) into a video project I am able to import some, but on others get the error "importer reported a generic error," and I can't figure out why some photos load and others don't. Can anyone help?

1st, Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PrEl Crash http://forums.adobe.com/thread/973935
2nd, what is the source of the picture? (ie... which camera)
SOME pictures may be created with "malformed" file header information... the solution is generally to open in Photoshop and resave to fix the file header
3rd, Pictures must be RGB not CMYK (CYMK?) http://forums.adobe.com/thread/1081681

Network-related or Instance-specfic error when attempting remote connection from SSMS

Hello,
I have installed SQL Server express on a Win7 desktop and want to connect to it via SSMS on a laptop. I have set up a SQL login on the desktop so I can login, but when I try to connect to the instance from the laptop via SSMS I get the error 26 with saying
there is a network related or instance specific issue and that there is an error locating the Server/Instance specified.
I am trying to connect to a named instance on the SQL Server on the win desktop. Remote connections are enabled and TCP 1433 and UPD 1434 ports are open in Windows Firewall. Antything else I should watch for?
Thanks

Hi MrDAndersen,
According to your description, you come across the errors of pre-login handshake and wait operation timing out. Please help to post the full error log for further analysis.
Based on my research, this issue could occur when .NET Framework 4.5 and non-IFS BSP/LSP are installed on the machine, and non-IFS BSP/LSP interferes with the call to Winsock.
To work around the issue, you could use one of the two methods below.
1. Determine whether a non-IFS BSP or LSP is installed. You could use the "netsh WinSock Show Catalog" command and examine every Winsock Catalog Provider Entry item that is returned. If the 0x20000 bit is clear (not set), it is a non-IFS BSP or
LSP and remove the installed non-IFS Winsock LSPs. For more information about the process, please refer to the article:
http://support.microsoft.com/kb/2568167
2. Download and apply .NET Framework 4.5.2:
http://www.microsoft.com/en-us/download/details.aspx?id=42643
There are two connect items for your reference.
https://connect.microsoft.com/VisualStudio/feedback/details/745004/
https://connect.microsoft.com/VisualStudio/feedback/details/729323
Best regards,
Michelle Li

Error when attempting to connect

hello there. whenever i try to connect to our new airport extreme 802.11n i get a strange error that consists of an 8 digit number that's different every time, and "PIN for "`¬Ä†å""
it fails to connect but keeps trying and completely freezes the airport menu for about ten minutes until it finally announces that it's completely failed with, "Please contact the network administrator about access to "`¬Ä†å". `¬Ä†å isn't the name of the network.
the light on the airport is blue and it works for someone else using it, he's using a Macbook Pro (not a core duo so no N support). the administrator isn't home at the moment but i'm getting pretty frustrated with being unable to print and scan using my printer. any ideas regarding something i could do on my end?
Macbook Intel Core 2 Duo Mac OS X (10.4.9)

OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

I have a -1202 error when attempting to connect to itunes windows xp is up to date

I have a -1202 error and can not get onto an itunes account

OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

Getting error when attempting to connect through infiniband interface

Similar Messages

Maybe you are looking for