Getting error when configured sender mail adapter
Hi Everyone,
When i tried configuring sender mail adapter am getting these logs in Runtime workbench.
In ID,when i gave ip address in place of URL, am getting this log
"exception caught during processing mail message; java.io.IOException: unexpected password response; read -ERR Logon failure: unknown user name or bad password."
When i gave URL in place of URL, am getting this log
"exception caught during processing mail message; java.net.UnknownHostException:"
why is it giving this log, What correction i have to do to make it work.
Thanks in advance,
Sakthi
Hi,
<i>1.How to stop deleting mails.</i>
When the IMAP4 protocol is used, we get an option "Delete messages when read".You could specify if you need to delete it or not.
<i>2.How to do mapping for an attachment,what additional things i have to do for this.</i>
Could you please elaborate?
<i>3.Is there any option to change the flag of mail once it is read by XI.</i>
You cannot do this from XI. You would need to do it in your email client. In case you are using IMAP4,you could mark the message as read, once XI reads the unread message.
Regards,
Smitha.
Similar Messages
-
Error when configuring Sender File Adapter (XI 7.0)
Hi all,
After i had configured my Sender File Adapter of Communication Channel 'CC_SEND_MATERIAL_FILE', an error message for this Communication Channel (in Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) occurred as below:
Error: com.sap.aii.af.ra.ms.api.DeliveryException: java.net.MalformedURLException: unknown protocol: dest
I think that all configurations for this Sender File Adapter are correct. But i don't know where is protocol "dest" and how can i correct this protocol.
Could anyone please help me to resolve this problem?
Thanks for all in advance,
Vinh VoHi Sarvesh,
Yes, i have configured the source file with the path in the AL11. I think all an other configurations are also OK. But i don't know what is protocol 'dest'.
Anybody can explain and help me, please!
Vinh Vo -
How to configure sender mail adapter
Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu SinghalHi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin -
Error during configuration of Sender Mail Adapter
Hellow All,
I was trying to configure Sender Mail Adapter and I am getting this error.
<b>error occured: exception caught during processing mail message; java.io.IOException: unexpected greeting response; read 220 mailrelay2.lntinfotech.com ESMTP Service (Lotus Domino Release 6.5.5) ready at Fri, 14 Jul 2006 16:11:29 +0530</b>
Can anybody please suggest me why this error is occured and how to solve that?
I am waiting with points, come on
Thanks in advance,
SugataHI,
1)Try to do with POP3
2)Check the URL , give correct Exchange Server Name/IP address.
3) Hope you have access to read the inbox (sometimes it will not be there)
Than try it.
Regards.
Moorthy -
Sender Mail Adapter Configuration error
Hi,
I am working on scenario mail adapter to CRM system. And when I tried to configure the sender email adapter I have got the error following error, Can any one help me to resolve this issues
error occured: <b>exception caught during processing mail message; java.net.ConnectException: Connection refused</b>
the details I have provided are as follows
Transport protocol is POP3
URL - POP://mailservername/Inbox/folder
And I have tried with the IMAP4 also
URL - IMAP://mailservername/Inbox/folder
And we have cross checked that the XI server is able to ping that particular mail server.
Regards,
Venkat.Hi Venkateswara,
I would suggest that you go through these to know how to configure your sender mail adapter,
<a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step mail adapter step by step</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure adapter Scenario</a>
Also, to know the various parameters of a sender mail adapter, just go through this link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">Configuring sender mail adapter</a>
Check your mail adapter configuration against these details. Also, check if the mail server you are trying to access is running.
Also go thru this pdf to make yourself more comfortable with mail adapters.
https://websmp205.sap-ag.de/~sapidb/011000358700004556712005E/HowTo_Mail_Adapter2.pdf
Regards,
abhy -
Sending mail adapter from Exchange server
Hi ,
I need to configure sender mail adapter which needs to forward the mails comes to the Microsoft Exchange server to XI and then to other application..
MAIL->XI->SAP System..
We are using Microsoft Exchange server to send/receive mails..But we need POP3 url to receive mails ..is it possible to receive mails from the Microsoft Exchange server..
Can anybody help me to find out the solution..Anandan,
Yes it possiable to send mails from MailServer.
Configuring the Sender Mail Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
Mail Adapter scenarios SAP Exchange Infrastructure
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
Mail Adapter (XI) - how to implement dynamic mail address
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Also refer these links:
http://www.microsoft.com/exchange/evaluation/compare/ClientCompare.mspx
http://www.microsoft.com/exchange/evaluation/whatis.mspx
http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
http://www.imap.org/papers/imap.vs.pop.brief.html
Also please go through these notes:
804102
xi 3.0 mail adapter with pop3 user authentication problem
810238
XI 3.0 Mail Adapter for POP3 may not report some errors
Just an additional info "sender mail adapter is to convert e-mails to XI messages"
Message was edited by:
Sreeram Reddy -
How to determine the protocol to use in Sender mail Adapter ?
Hi All
Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .? If yes , then which protocol i can use out of IMAP and POP ?..
How do i determine which protocol i should use to connect to my exchange server ?
Thanks
rohanHi Rohan,
//Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .?
Yes, you can.
//If yes , then which protocol i can use out of IMAP and POP ?..
You can use either of them. To know more on IMAP and POP, i would suggest you go through these links,
http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
http://www.imap.org/papers/imap.vs.pop.brief.html
If your are using IMAP, you will have to specify, which folder from which you wnaty the emmail to be retrived, this is not needed for POP.
Hope this helps,
Regards,
bhavesh -
Sender mail adapter config for MS Exchange Server
Dear All Gurus,
Need your advice on configuring sender mail adapter (mail to file scenario ) for exchange server. I have read a lot of SCN threads and other articles and was not able to find the exact solution for this. PI version : 7.3.
Thank you all in advance...Hi,
please check the below links.
http://wiki.scn.sap.com/wiki/display/XI/Step+by+Step+Mail+To+File+Scenario - Mail to File
http://www.riyaz.net/sap/xipi-configuring-the-sender-mail-adapter/90/
Regards
srinivas -
Error when using Variable Transport Binding in Sender Mail Adapter
Hi,
I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
Any ideas why this is happening?
Thanks,
BradHi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad -
When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNSHi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Sender Mail Adapter - CC Error
Hi,
My scenario is Mail>XI>Proxy(R/3).
The sender mail adapter checks the e-mail box and procces into XI.
I'm getting the following error in the CC:
"exception caught during processing mail message, java.lang.ArrayIndexOutOfBoundsException 0 > = 0"
But, this error is only present when the client try to sent the e-mail data, If i resend the same e-mail manually it works perfectly ( Which led me to think that the CC configuration is correct ).
I'm not ruling out any outlook issue.
Do you guys have experiencied this kind of issue?
Thanks.Thanks Satish,
I'm sending the same e-mail. (manually works, automatically don´t work)
Also, I can´t see the result of the payload because the error is in CC and only shows that error.
Configuration CC:
Transport Protocol: POP3
Message Protocol: XIPAYLOAD
URL, User,Pass...
Encoding : base64
Quality of service: Exactly Once
- Any suggestions? -
Sender Mail Adapter Error: exception caught during processing mail message;
HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference. -
Sender mail adapter : no messages and no error log
Hello,
I have configured a sender mail adapter to read mails from the inbox. I have used IMAP protocol. URL is specified as imap://EMHBSEXM01/Inbox. User name and password is also specified properly. I have kept poll interval to 1 minute. Messages in the inbox are in unread status. But the mail is not getting processed. I do not see anything after 1 minute. I tried using generate fetch report flag. But even then it does not create any message in SXMB_MONI. I checked runtime workbench for Mail adapter but I do not see any message for the same. Is there something that I am missing?
Thanks,
DevHi All,
I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
Does anyone have any idea what this error is?
Thanks in advance,
Devendra -
Sender Mail adapter get no mails
Hello,
we are using the sender mail adapter to receive mails (IDOCS) from a Exchange server.
A few days it works, but suddenly no mails are received.
But in RWB the mail adapter status is green and shows, that there are no new mails. But when I check the mail box with OUTLOOK, there are some mails.
When I deactivate and activate the mail adapter, all mails are read then.
Pollinterval: 1 minute
XI: SP10
Who can help me are had s similar problem?
Or is it possible to stop/start the mail adapter (or the adapter engine) automaitcally (more like a workarround)
best regards
Werner MagerlHi All,
I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
Does anyone have any idea what this error is?
Thanks in advance,
Devendra
Maybe you are looking for
-
Error while reversing mat document
Dear all, While reversing material document i am getting error as "Reverse the availed CENVAT credit before cancelling excise invoice." How i should proceed? Naren Edited by: Narendra Khedekar on Oct 5, 2010 10:50 AM
-
How do i re-install my CS4, with no discs?
How do i re-install my CS4, with no discs? I have InDesign CS from 2003. At some point I upgraded to Adobe CS4, but I did that online, and never had a disc. I had to clear my Mac, and reinstall my Mac when it crashed. I uninstalled my Adobe CS4, an
-
Specific Field in Material Master
Hi All, just some user can't see specific Field in Material Master with using MM03, but others people can. Where should I change settings? Is it something to do with authorization? thank®ards
-
Hi...hope someone can explain where I'm going wrong with my proposed menu system ? I have an HTML snippet with the code for a rollover menu so that on one page the menu will allow the selection of similar material to be accessed without the need to "
-
CC Ball Action stops working when I try to use a mask
Using AE CS6 on mac os 10.7.5. I'm trying to use CC Ball action to make a cool particle animaation. In order to do the animation I'm trying to create I need to use a mask. Every time I use a mask the cc ball action stops working. It's still in th