Getting Error when consuming portlet using WSRP at remote loacation
Hi,
I have created a producer portlet on a weblogic(10) domain installed at one machine.
When i am trying to consume that portlet using WSRP ,on that machine , its working perfectly fine.
But if am trying to consume this portlet from some other remote location, its giving me the following error.
Although i am able to get the WSDL of the remote portlet through IE.
Exception Stack trce :
com.bea.wsrp.faults.TransportException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl; nested exception is:
java.io.IOException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl
at com.bea.wsrp.proxy.ProxyBase.isVersionSupported(ProxyBase.java:1069)
at com.bea.wsrp.proxy.ProxyBase.getMaxNSforOperation(ProxyBase.java:1044)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.wsrp.proxy.ProxyBase.invoke(ProxyBase.java:422)
at $Proxy0.getMaxNSforOperation(Unknown Source)
at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:97)
at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:72)
at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:61)
at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.getServiceDescription(ProducerAgent.java:99)
at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:57)
at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:45)
at com.bea.wlp.eclipse.wsrp.portletbuilder.wizard.wsrp.SelectProducerPanel$ProducerInfoRunner.run(SelectProducerPanel.java:628)
Caused by: java.io.IOException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1149)
at com.bea.wsrp.util.CompatWsdlParser.getWsdlDocument(CompatWsdlParser.java:310)
at com.bea.wsrp.util.CompatWsdlParser.getWsrpPortUrls(CompatWsdlParser.java:64)
at com.bea.wsrp.wsdl.FixupWsdlParser.tryFixup(FixupWsdlParser.java:74)
at com.bea.wsrp.wsdl.FixupWsdlParser.parse(FixupWsdlParser.java:63)
at com.bea.wsrp.wsdl.WsdlInfoImpl.<init>(WsdlInfoImpl.java:169)
at com.bea.wsrp.wsdl.GlobalWsdlPool.getWsdlInfo(GlobalWsdlPool.java:55)
at com.bea.wsrp.proxy.ProxyBase.getWsdlInfo(ProxyBase.java:512)
at com.bea.wsrp.proxy.ProxyBase.isVersionSupported(ProxyBase.java:1065)
... 14 more
Edited by help_eachother at 08/20/2007 6:40 AM
The remote producer is returning an error code 503. You may be getting the same response code when you hit the producer web app. Could you verify this, and also the server logs on the producer side. I suspect that the app did not deploy correctly.
Similar Messages
-
Getting error when passing objects using IntelliJ 7.0
Hi All,
i have just started working in Web Services using Axis 2 in IntelliJ IDE. i am getting this error when i pass objects:
org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.i have used rpc/literal, i tried with other combinations but not working.
i have created two class called "address" and "user" and i want webservice client to pass "address" object to a "user" method.Hi,
Try populating the ltab_extensionin as the code given below:
Maybe it can help you.
Constants: c_flag_bape_vbak TYPE char10 VALUE 'BAPE_VBAK', " Constant
c_flag_bape_vbakx TYPE char10 VALUE 'BAPE_VBAKX'," Constant
wa_bape_vbap-vbeln = space.
wa_bape_vbap-posnr = wa_order_items_in-in_linenumber.
MOVE c_flag_bape_vbak TO wa_extensionin-structure.
MOVE c_flag_bape_vbap TO wa_extensionin-structure.
CALL METHOD cl_abap_container_utilities=>fill_container_c
EXPORTING
im_value = wa_bape_vbap
IMPORTING
ex_container = wa_extensionin-valuepart1.
APPEND wa_extensionin TO it_extensionin.
CLEAR : wa_extensionin.
MOVE c_flag_bape_vbapx TO wa_extensionin-structure.
wa_extensionin-valuepart1+0(10) = space.
wa_extensionin-valuepart1+10(6) = wa_order_items_in-in_linenumber.
wa_extensionin-valuepart1+80(3) = abap_true.
APPEND wa_extensionin TO it_extensionin.
CLEAR : wa_extensionin.
Regards,
Shweta -
Getting Error when we are using same variable value in parallel flows
Hi All
In one of the case we will get a Zipped folder in which we have 4 different types of files . we will have date in folder name . we want to insert that date in all the 4 types file data . so we are storing the filedate in a variable and we are planning to
insert that variable value in all the 4 types files . when we are loading data in parallel of those 4 files (if the folder size is less than 20MB there is no problem ) we are getting the below error . If we run them in Sequence it is working
fine without error . Please suggest what will be the issue .
[OLE DB Destination [132]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
[OLE DB Destination [132]] Error: There was an error with input column "filedate" (523) on input "OLE DB Destination Input" (145). The column status returned was: "The value could not be converted because of a potential loss of data.".
[OLE DB Destination [132]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (145)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "OLE
DB Destination Input" (145)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (132) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (145). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
Surendra ThotaHi Surendra,
It might be a data type casting issue caused by memory pressure. Please try to use the minimal length of data types that meet the requirements. Besides, if the package runs in 32-bit runtime mode, try to execute it in 64-bit runtime mode. In addition, if
the issue is not happening in the production environment, I suggest that you install the latest Service Pack for your SQL Server 2008 (R2).
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Keep getting error when trying to use =related function in PowerPivot
Greetings,
I have created a relationship between two tables based on a common field in PowerPivot, and whenever I use the =related() function to try and bring data from a field in one table to a field in another table, I keep getting and error message that says:
The column 'XXXX[xxxx]' either doesn't exist or doesn't have a relationship to any table available in the current context.
Any ideas? I've made this work before in a different dataset so I'm not sure what I'm missing. I have a feeling it might be really basic, but I'm spinning my wheels here.
Thanks very much!
MFWHi MFW,
This sounds like the table where you are trying to use the RELATED function from is on the
one side of the one-to-many relationship (i.e. the relationship arrow is pointed towards it). If in reality there is only a
one-to-one relationship between the data and you only need to bring the data from one table to the over, you can simply reverse the direction of the relationship and the RELATED function will work as expected. If this is not the case then you'll
need to use RELATEDTABLE instead of RELATED and some kind of aggregation or computation that ensures that a single value is returned for the column you are trying to get data from. There is also another function called CALCULATE which can be used for
this scenario.
Imagine that we have two simple tables: Table1 and Table2...
Table1
Column1
Column2
1
A
2
B
Table2
Column1
Column2
1
AA
2
BB
...and create a relationship where Table1 is on the many side and Table2 is on the one side i.e. Table1 -> Table2
We could use a number of methods to pull the the values from Column2 in Table1 into a new Calculated Column in Table2.
If the column we are trying to pull contains text values then we could use a combination of the CALCULATE and LASTNONBLANK function:
=CALCULATE(LASTNONBLANK(Table1[Column2], TRUE()))
If the Table1[Column2] contained only numeric or date values then we could use a combination of the RELATEDTABLE and MAXX functions:
=
MAXX(
RELATEDTABLE(Table1),
Table1[Column2]
An alternative to the DAX directly above is to use the CALCULATE and MAX functions:
CALCULATE(MAX(Table1[Column2]))
You can learn more about the functions I have referred to below:
CALCULATE
LASTNONBLANK
RELATEDTABLE
MAXX
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn -
Frm-92101 getting error when running form using webutil
hi
I get an error FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details
i am using form version
Forms [32 Bit] Version 10.1.2.0.2 (Production)
problem is some time form runs and some time dont any solution or possibility???check this for configuration of webutil
http://baigsorcl.blogspot.com/search/label/WebUtil
Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/] -
Get error when unzipping document using Java Class
I am using an applet to unzip a compressed docuement. The document is compressed by a Java Rich client into a database and is going to be opened by a web application. So in order to decompress we are using an applet with the same unzip code. The rich client is working fine, but the applet is giving an error. Can anyone tell me what the following error means?? I have found no documentation on it and it is not giving me any real information.
java.util.zip.DataFormatException: oversubscribed dynamic bit lengths tree
I am using the Inflater class to unzip the doc.
thanks,Can you be any more specifc about what you are doing?
It may be a security issue as you are running the code in an applet.
The other thing to look into would be the content type you are using to send the zipped data over http. When writing the zipped object into the HttpServletResponse on the server you must call
setContentType("application/zip");
For a quickish example see
http://java.sun.com/developer/technicalArticles/Networking/Webserver/WebServercode.html
This sets the content type based on the file to be returned extension.
Hope this is helpful. -
Getting error when trying to use on 64bit server.
I have deployed my .NET app to 32bit workstations with no problem, but I have some users that remote in to the server to run and they cannot print reports. They are getting the following error
Either Crystal reports registration key permissions are insufficient or the Crystal Reports runtime is not installed.
Please install appropriate Crystal Reports redistributable
What do I need to do in order for this to work in 32bit and 64bit environments?Need more info.
1) What version of CR?
2) What OS?
3) Is this a we app or some sort of server / client app?
4) What version of .NET?
Also, from your description, I'm having a problem connecting that to your query re 32 bit and 64 environments(?).
Ludek -
Getting error when submitting form using IE but not when using FF
Error: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs.
at Error$/throwError()
at flash.net::URLVariables/decode()
at flash.net::URLVariables()
at flash.net::URLLoader/onComplete()
Has anyone had this problem?I don't know how I would test that I don't know of any way to test it locally.
here's the code for the form:
import flash.net.*;
import flash.events.*;
import flash.text.TextField;
var status_txt:TextField = new TextField();
var myFormat:TextFormat = new TextFormat();
myFormat.font = "Georga";
myFormat.color = 0x00ff00;
myFormat.size = 21;
status_txt.autoSize = TextFieldAutoSize.LEFT;
status_txt.x = -240;
status_txt.y = -225;
addChild(status_txt);
submit_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
stage.addEventListener(KeyboardEvent.KEY_DOWN, reportKeyDown);
//this.status_txt.mouseEnabled = false;
//this.parent.mouseEnabled = true;
function reportKeyDown(e:KeyboardEvent):void {
var KeyCode:uint = e.charCode;
if (KeyCode == 13){
submit_btn.dispatchEvent(new MouseEvent(MouseEvent.CLICK));
function ValidateAndSend(e:MouseEvent):void {
var variables:URLVariables = new URLVariables();
var request:URLRequest = new URLRequest();
// variables.recipient = "[email protected]";
if(!name_input.length){ createStatus("please enter a name"); }
else if(!email_input.length) {createStatus("please enter a email address");}
else if(!validateEmail(email_input.text)){createStatus("enter valid email address");}
else if(!message_input.length){createStatus("please enter a message");}
else {
variables.name = name_input.text;
variables.email = email_input.text;
variables.message = message_input.text;
request.url = "gdform.php";
request.method = URLRequestMethod.POST;
request.data = variables;
var loader:URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
loader.load(request);
createStatus("Thanks " + name_input.text + ", your message has been sent!");
function createStatus(msg:String):void {
status_txt.text = msg;
status_txt.setTextFormat(myFormat);
function validateEmail(str:String):Boolean {
var pattern:RegExp = /(\w|[_.\-])+@((\w|-)+\.)+\w{2,4}+/;
var result:Object = pattern.exec(str);
if(result == null) {
return false;
return true;
this is the php on the server that I submit to.
<?php
$request_method = $_SERVER["REQUEST_METHOD"];
if($request_method == "GET"){
$query_vars = $_GET;
} elseif ($request_method == "POST"){
$query_vars = $_POST;
reset($query_vars);
$t = date("U");
$file = $_SERVER['DOCUMENT_ROOT'] . "/../data/gdform_" . $t;
$fp = fopen($file,"w");
while (list ($key, $val) = each ($query_vars)) {
fputs($fp,"<GDFORM_VARIABLE NAME=$key START>\n");
fputs($fp,"$val\n");
fputs($fp,"<GDFORM_VARIABLE NAME=$key END>\n");
if ($key == "redirect") { $landing_page = $val;}
fclose($fp);
if ($landing_page != ""){
header("Location: http://".$_SERVER["HTTP_HOST"]."/$landing_page");
} else {
header("Location: http://".$_SERVER["HTTP_HOST"]."/");
?> -
Getting error when reading xml file from a remote connection
Hi all,
I want to read an xml file from a remote connection, not from my local machine.So when i am creating the data server i am giving the host name(that is the ip of the machine where the xml file is located), giving the proper username and password and giving the path of the xml file. When i am testing the connection the error that is coming:- "Connection failed and the xml file could not be created, verify that you have write permission in the directory"...
but read write and execute permissions have been given on the directory as well as to the file...
Regards,
SouravHi Sutirtha,
Initially I have started the agent.sh giving the agent name <agent name>and port number 20910 and defined it in the topology manager it is showing that the agent test is succesful. Then I tested a particular Data server against that agent and the test was successful.
After this we had stopped the agent and restarted it.
However now suddenly the testing against the remote agent is failing with the following excep:
java.lang.Exception:
at com.sunopsis.graphical.l.pm.a(pm.java)
at com.sunopsis.graphical.l.pm.s(pm.java)
at com.sunopsis.graphical.l.pm.g(pm.java)
at com.sunopsis.graphical.l.pm.a(pm.java)
at com.sunopsis.graphical.l.pm.a(pm.java)
at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at com.sunopsis.graphical.l.pm.q(pm.java)
at com.sunopsis.graphical.l.pm.<init>(pm.java)
at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
at com.sunopsis.graphical.frame.bo.w(bo.java)
at com.sunopsis.graphical.frame.bo.d(bo.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
PS: do i have to modify any file after or before starting the odi agent
Thnks and Rgds,
Sourav
Edited by: user13263578 on Mar 15, 2011 9:35 PM
Edited by: user13263578 on Mar 15, 2011 9:48 PM -
Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation
Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.Hi,
Check the sample code..
report zpo_test .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
exporting
poheader = header
poheaderx = headerx
importing
exppurchaseorder = purchaseorder
tables
return = return
poitem = item
poitemx = itemx
poaccount = account
poaccountx = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
write / return-message.
endloop.
Regards
Sudheer -
Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?
Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet. -
Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.
I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.
-
Getting error when record type is used
Hi Experts,
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
IS
TYPE emp_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
TYPE emp_type is TABLE OF emp_record INDEX BY binary_integer;
PROCEDURE EMP_PROC;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
END;
CREATE OR REPLACE PACKAGE BODY emp_details_proc
IS
PROCEDURE EMP_PROC
IS
V_DEPTNO NUMBER := 10;
V_JOB VARCHAR2(20):='CLERK';
BEGIN
for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
loop
sal_update_PROC
( p_rule => rc
, p_deptno => V_DEPTNO
, p_job =>V_JOB
end loop;
EXCEPTION
WHEN OTHERS THEN
DBMS_output.put_line(SQLERRM);
END;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
IS
V_ename VARCHAR2(20);
V_SAL NUMBER;
BEGIN
V_ename := p_rule.ename;
V_sal := p_rule.sal;
IF V_sal <=3000 THEN
UPDATE EMP SET sal=sal+v_sal*10 WHERE ename=v_ename;
commit;
END IF;
dbms_output.put_line(v_ename||' '||v_sal);
END;
END;
Instead of this
SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
If I use
SELECT * FROM emp where deptno =v_deptno
PROCEDURE sal_update_PROC
( p_rule in emp%ROWTYPE
, p_deptno in number
, p_job in number
I am not getting any error.
Please help me.Why I am getting error what is wrong in my code.
Thanks in advance.for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
loop
sal_update_PROC
( p_rule => rc
, p_deptno => V_DEPTNO
, p_job =>V_JOB
p_rule => rc --> What exactly in rc? It's just a counter. You are using this (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)query but not using a single value returned from this query in the code.
Ishan -
Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?
Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far... -
I get the following error when trying to use the itunes store "your apple id has been disabled"
I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?
Welcome to the Apple Community.
Contact Apple through iTunes Store Support
Maybe you are looking for
-
How do I combine two versions of the same album into 1
I have songs from the same album on 2 albums in my library. How do I combine them?
-
Hi - my Apple TV had a failed up date and now I need to restore it. I have hard wired to my comp but iTunes's does not see to be picking it up? Just have the apple device blinking its light and comp timer is just going round? Any ideas anyone? Thanks
-
When i try to install ijii reactor it install almost ill end but then fail error is following: Feature: ijji Auto Installer Component: iAIFile1 File: C:\Program Files (x86)\Mozilla Firefox\Plugins\ How i i remove this file because it says thath alrea
-
Hello every body, I have got few queries for which I require answer urgently. Kindly revert back immediately. Whether the following transactions are possible in Standard SAP without any enhancements. 1. After the Goods recept, is it p
-
API to create Descriptive Elements with Catalogs
We need to add new descriptive elements on Item Catalogs programmatically. Could someone please guide with appropriate API`s or any other loader process. Also please note this is not assigning values for descriptive elements under items. This is only