Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

Similar Messages

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

Getting error when refreshing the WebI report

Hi,
I am building WebI reports using a universe which is constructed over a BI cube.
Initially I am building the report and uploading it into CMS.
When I am importing the report from CMS and refreshing it, I am getting an error
"A database error has occured. The database error text is: A runtime exception has occured. (Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
What could be the reason for this kind of behaviour?
The version of BO is 3.1.

Hi,
Your answer was really helpful, and it worked upto some extent. I have updated the lisence key and the following error is no longer coming.
"(Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
But now I have a new error popping up when ever I import a report from CMS and refreshing it.
The error is "A database error occured. The database text is: The supplied XML is not valid.[SYMTNKEY].[LEVEL 01]. (WIS 10901)."

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?

yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Timout error when schedule a large report

I received a timeout error when I scheduled a large report. To refresh and save it as an excel file, and then send to a file location. I can do that with a small report. Could I change the setting somewhere to increase the bach process time? Thanks!
Failed
External Destination:     File copy the instance with the filename: "Inventory Usage STE2008-11-20-11-48-52.xls" to the directory: "//osh_fs/share/Inventory Usage Report/STE" .
Creation Time:     11/20/2008 11:48 AM
Start Time:     11/20/2008 11:48 AM
End Time:     11/20/2008 12:08 PM
Server Used:     oshbo1.Web_IntelligenceJobServer
Error Message:     Transport error: No response from server, timeout exceeded.

Hi,
For scheduling a lrage webi report:
Go into the CCM, and then Stop the Input, Output, WebI Job Server.
In the Command line of WebI Job Server :
Before -restart add " -requestTimeout 7200000"
i.e: ......procwebi -requestTimeout 7200000 -restart.........
In the Input FRS:
Do the same as above.
........ -requestTimeout 7200000 -restart......
In the Output Server do the same as well: add -requestTimeout 7200000 before -restart.
Start all the servers.
-Shreyash.

WIS 10901 error when creating a webi report based on OLAP unv (SSAS 2005)

Hi,
I'm using two VM.
Machine A is running SSAS 2005. I'm able to create SSAS cube. Everything is ok
Machine B is runing BO XIR3.1. I'm able to create webi report on relational DB without any problem or opening samples.
Both VM machines are on the same custom network and I'am able to ping both. SQL managment server studio is installed on both machines. I'm able to manage SSAS from B also and not only from A.
Creating unv with BO designer on machine B is OK, connexion is runing and universe has been created and published on the BO server
But when I create a webi report from B, using my OLAP unv based on SSAS located on machne A I recieve following error message :
Une erreur de base de données s'est produite. Le message d'erreur est le suivant : . (WIS 10901)
thanks for your help,
Nicolas

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Error when geeting the WebI report into Xcelsius using LiveOffice

Hi All,
I am using Xcelsius 2008 SP2 and Live Office. I run the report in the WebI and I am trying to get the report into Xcelsius using the live office. When I go to live office and select web intelligent I am able to see the report it the InfoView but when I go to next step to insert into live office I am getting the below error "
An error occurred when an object was selected in the report part viewer.(LO 02026)
Maximum character output size limit reached. Contact your BOBJ administrator(Error: ERR_WIS_3072)".
Could any one please help me.
Thanks
Muvva

Hello Raghavendra,
What is the size of the WebI report? There may be a limitation to the rows of data you can pull into Live Office.
If this is the issue, you can avoid it through an alternative connection method called the [Xcelsius Web Intelligence Integration Suite.|http://antivia.com/products-xcelsius.stm]
You can use this to connect Xcelsius directly to WebI, without the need for Live Office.

Getting error while refreshing a Webi reports for a specific universe

Hi Experts I am trying to refresh a WEBI Report but getting this error: A database error occured.
The database error text is (cs)"Specified network layer is invalid" Previously this was working fine...
from today itself I am getting this error
My DB is DB2 DB Drivers: DB2 V9 ->JDBC Driver

Test Connection is always successful...
Not sure whats wrong

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Regional Settings when scheduling a webi report

Hello,
I have BOXIR2 SP4 installed on a Windows 2003 Server.
When I run a Webi Report In the Infoview Portal (or in webi), that means when I refresh a report or save a report to Excel or PDF Format or the date format is correct. When I schedule this report from Infoview, it's also ok.
Correct Format ==> format of the language defined in the Infovier User Interface Settings.
(infoview in french --> french format , infoview in english --> english format)
But, When I schedule this report from the Central Management Consle (CMC), the date are displayed in the english or american format : 02/11/10 instead of 11.02.2010
I check the "Regional and Language Options" on my Windows Server and the language is set to "French (Switzerland)".
All the BO Services are running with the 'Local_system Account'.
I don't understand why it is not taking the French language to generate the reports... ? Which parameter or file based on?
How to change this behavior ? It is a way to "force" BO to take an other language ?
A big thank you for your help! I have already gone through the forum but found nothing concrete ...
JP
Edited by: Jean-Philippe Fauchère on Feb 11, 2010 3:42 PM

Hello wavery,
I finally solved my problem. And In fact it was very simple I thought that by leaving the default value "Use Interface locale" under the web Intelligence Tab, the settings defined in the interface were taken into account, but this is clearly not the case!
My settings were defined as follows :
Infoview > Preferences > General > My interface locale is ... --> French (Switzerland)
Infoview > Preferences > Web Intelligence > Select a format locale: --> Use Interface locale
(I don't understand why the French were not chosen because my interface was defined in French ??)
My settings, after modification:
Infoview > Preferences > General > My interface locale is ... --> French (Switzerland)
Infoview > Preferences > Web Intelligence > Select a format locale: --> French (Switzerland)
>>> It works !
Thanks for your Help...

Getting error when testing a web service through WS Navigator

Hi experts,
I am using PI 7.1
I am getting the following error while testing the web servicefrom WS navigator
com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException: No operation found using soap keys [],
I did the following developement
1 created service interface in Integration repository
2. generated java bean skeleton on NWDS
3. deployed it on JPR
4 created Endpoints
Pls suggest some solution to fix the problem.
Thanks & Regards
Nitin

Check this guide:
http://wiki.sdn.sap.com/wiki/display/JSTSG/(WSR)Problems-P04
Regards,
Ravi

Getting error when argument of web.show_docunent(file_name)

Hi,
I am getting error if I open a document in thin client using web.show_document(file_name)
if file_name is null then get error f FRM-40748
is any excepttion handling
begin
web.show_document(file_name);
exception
end;
I don't want to use if file_name is not null then web.show_document

I think web.show_document takes two parameters, the first one being the filename,
and the second one could be(_blank,_parent,_self).
See the form builder help for more details.

Error when Scheduling a Cristal Report versus an Excel Table.

The excel book is located in a folder at the Infoview server.
The report has been published at the Infoview
If I use the u2018u2019u2019viewu2019u2019u2019 link at infoview I obtain the results ok. (Iu2019m not asked for any user/pw)
But
If I try to schedule the report, I always obtain an Error, because it needs a user/pw
(Error en archivo E:Archivos de programaBusiness ObjectsBusinessObjects Enterprise 11.5DataprocSchedservername.reportjobserver~tmp1da060de63d6960.rpt: No se puede conectar: parámetros de conexión incorrectos. )
Which user/pw does the system ask for?
Thanks!

Hello,
Just to let you know we figured this one out. At some point I'd installed Crystal Reports Designer XI R1 on the server (must have service packed it as well). This is a good thing as it's helped troubleshoot various connection issues etc.
However this overwrote the prompt.dll file, the version of the new file was 11.0.0.2478. I've since installed Business Objects XI R1 on my local machine without Crystal Reports to see what the version of the prompt.dll file would be. It was 11.0.0.1282 so I replaced the newer prompt.dll with the older one and problem fixed.
Cheers,
Chris

Error when scheduling WebI reports in Infoview

When I shedule WebI reports in Infoview I get the error message "The target program that is required for the task i inactivated".
First I choose the report that I want to schedule. Then I rightclick and choose "Shedule" and choose "Send To" and any of the choises. The I get the error message in the subject.
We use:
-BO XI 3.1 SP3
On my client:
-IE 7.0.573013 or Firefox 3.0
-Win XP
-Java 1.5
How can I get the sheduling up and running?

Hi All,
I want a run my report once by scheduling, so i provide a time interval for scheduling a report
start date/ time : 11:38:AM 10/30/2011
end date/time : 11:43:AM 10/30/2011
after completion of end time....report is failed and fetching an error
Error : Object could not be scheduled within the specified time Interval
Any solution for resolving this error

Getting error when schedule a webi report

Similar Messages

Maybe you are looking for