Getting error when try to load from R3 to bw after the patches

we are in BW3.5
last day we applied patches to R3 system and BW system, and Now I am trying to load data into BW, it is failing, I am getting message says "Incomplete control parameter for commmunication with the BW system" Any idea?

Hi
Do a right click/Check source system on your source system in R/3....
Check the source systems definitions inn R/3 (we20, we21)
Ask the basis team to check everything is OK
PY

Similar Messages

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

IP address error when try to print from GS4

I have set up ahome network so we can print from our phones or laptops wirelessly (no internet). The phones are Galaxy S4s, the printer is an HP Photosmart Plus B210 series, and the router is a netgear. The router has been reset to factory to erase the (forgotten) WEP key. All devices will find the printer. One of the phones prints fine, but when I try to print from the other I get a error message along the lines of "Using a static IP adress may cause printing issues, try setting up a dynamic IP." Both phones were purchaced and activated at the same time, the only dfference being my husband downloaded an app "HP All-In-One Printer Remote" while I wasn't here, trying to print a document. I have since uninstalled it thinking it was causing the error, but I still can't get his phone to print, The error dialouge box pops up with "OK' and "Cancel" options when you choose the printer, then it just sits there. I sent the document to my phone and it printed fine, so I don't think it is the document. Any ideas..? As far as I know, no configuration changes have been made to either phone that would cause something llike this...
Thanks
dawtch

Hi dawtch,
Welcome to the HP Support forums. I gather that your Samsung Galaxy S4 prints to your Photosmart B210 series printer, yet your husband’s Samsung Galaxy S4 is unable to successfully send print jobs.
I’ve included the ePrint Job Did Not Print document for you to follow the trouble shooting steps. I know you’ve indicated that the phones should be configured the same, but if you husband is like my husband ....
If the steps in the document don’t resolve the issue, would you please post back with some further information:
What version of Android OS is running on your husband’s phone? How To Check What Android Version You Have by wikiHow
Have you set up the ePrint feature of the printer?
How are the print jobs being sent to the printer (by HP ePrint app, 3rd-party app, or forwarding an email to the printer)?
Is your husband connected to the same wireless network as the printer when he tries to print?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Get error when trying to load Grid editor in EPMa for my Custom 1 Dimension

Hi,
Would anyone know why I get the the below error when I try to edit my C1 dimension in HFM:
Error Message: Error Loading Namespace for id : awb.grideditor
All EPM Services are started.
Regards

Alo why would you get the below error:
There was a communication error processing the data.URI: http://address../awb/dimeditor.getChildNodes.do

Getting error when starting managed server from administration server

          When i start one of my managed server in the cluster i get the following error
          The WebLogic Server did not start up properly.
          Exception raised: java.lang.ArrayIndexOutOfBoundsException
          java.lang.ArrayIndexOutOfBoundsException
          at com.bea.utils.misc.ProcessUtil.base64ToBytes(ProcessUtil.java:552)
          at com.bea.utils.misc.Process.validate(Process.java:1231)
          at com.bea.utils.misc.Process.isValidSignature(Process.java:518)
          at com.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:647)
          at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:278)
          at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:335)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
          at weblogic.Server.main(Server.java:35)
          Reason: Fatal initialization exception
          Please tell if somebody know it


Do you have any other products from BEA other than WLS?
          I can't seem to find the following (com/bea/utils/misc) from WLS source
          line ?
          Kumar
          Ritesh Kapoor wrote:
          > When i start one of my managed server in the cluster i get the following error
          > The WebLogic Server did not start up properly.
          > Exception raised: java.lang.ArrayIndexOutOfBoundsException
          > java.lang.ArrayIndexOutOfBoundsException
          > at com.bea.utils.misc.ProcessUtil.base64ToBytes(ProcessUtil.java:552)
          > at com.bea.utils.misc.Process.validate(Process.java:1231)
          > at com.bea.utils.misc.Process.isValidSignature(Process.java:518)
          > at com.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:647)
          > at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:278)
          > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:335)
          > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
          > at weblogic.Server.main(Server.java:35)
          > Reason: Fatal initialization exception
          >
          > Please tell if somebody know it
          >
          >

Getting error when importing BP records from Excel

Hi,
I am familiar with importing from Excel into SAP using Admin>Data Import/Export, so I very puzzled by an error message.
Row Number 1: Default payment method should be included with the BP's payment methods [Business Partner - Payment Method Code]
This error appears for every row. I do not see the field in the Import From Excel Field pull-down menu that I can add or assign to a column in my excel sheet that will fix this problem.
Thanks!

Jennifer,
If you are so confident about the settings in B1 then it is probably something to do with the import engine.
The other option would be to import this through DTW. Unless there is a compleling why you only want to use the Import utility I would not wait to do this using DTW as it is equally easier given that it is only BP Master and everything is in excel already.
Thanks
Suda

Bought movie from iTumes get error when try to play it on iPhone

Yesterday I bought a movie from iTunes - just to see how movies looked on my iPhone. Downloaded fine, transfered to iPhone through iTunes. Movies - with cover image appear within the video list. When I try to play the movie I get a "This movie could not be played". Any ideas?

downloaded latest software - seems to have done the trick. sorry for being a daftie

Getting error when try to backup oracle rac to another location

Hi there,
I am attempting to backup database to another location from a Oracle RAC database version 11gr2. Here is my script:
#!/bin/ksh
export ORACLE_SID=vvsms1
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1; export ORACLE_HOME
BASE_PATH=/usr/sbin:$PATH; export BASE_PATH
PATH=$ORACLE_HOME/bin:$BASE_PATH; export PATH
/u01/app/oracle/product/11.2.0/dbhome_1/bin/rman target sys/viviet@vvsms log /home/oracle/log_rman/vvsms.log append <<EOF
RUN {
CROSSCHECK BACKUP;
CROSSCHECK ARCHIVELOG ALL;
ALLOCATE CHANNEL CHANNEL1 TYPE DISK FORMAT '/home/oracle/backup/vvsms/backup_%U';
BACKUP INCREMENTAL LEVEL 0 TAG 'incr_vvsms' DATABASE;
BACKUP ARCHIVELOG ALL;
DELETE OBSOLETE;
RELEASE CHANNEL CHANNEL1;
EXIT;
EOF
I write it into a .sh file and set crontab to run it. But when it run i get the error like these:
Starting backup at 22-OCT-12
channel CHANNEL1: starting incremental level 0 datafile backup set
channel CHANNEL1: specifying datafile(s) in backup set
input datafile file number=00002 name=+DISK2/vvsms/datafile/sysaux.289.794242439
input datafile file number=00006 name=+DISK2/vvsms/datafile/ts_service.dbf
input datafile file number=00007 name=+DISK2/vvsms/datafile/ts_viviet.dbf
input datafile file number=00008 name=+DISK2/vvsms/datafile/viviet.dbf
input datafile file number=00009 name=+DISK2/vvsms/datafile/ts_vivietct_primary.dbf
input datafile file number=00003 name=+DISK2/vvsms/datafile/undotbs1.290.794242445
input datafile file number=00001 name=+DISK2/vvsms/datafile/system.288.794242429
input datafile file number=00004 name=+DISK2/vvsms/datafile/undotbs2.292.794242453
input datafile file number=00005 name=+DISK2/vvsms/datafile/users.293.794242455
channel CHANNEL1: starting piece 1 at 22-OCT-12
released channel: CHANNEL1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on CHANNEL1 channel at 10/22/2012 01:50:16
ORA-19504: failed to create file "/home/oracle/backup/vvsms/backup_2anobqu5_1_1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
I don't know what i'm wrong? The location is correct ("/home/oracle/backup/vvsms/).
Please suggest me some things about it. What do i need to do?
Thanks in advance!
P/s: Sorry for my bad English.

/u01/app/oracle/product/11.2.0/dbhome_1/bin/rman target sys/viviet@vvsms log /home/oracle/log_rman/vvsms.log appendThis line can be your problem.
As this database is a RAC and your are using a service with load balance "vvsms" and "/home/oracle/backup/vvsms" is not a shared location. RMAN is starting a session on Other node where "/home/oracle/backup/vvsms" does not exists.
Try change it :
/u01/app/oracle/product/11.2.0/dbhome_1/bin/rman target sys/viviet@vvsms log /home/oracle/log_rman/vvsms.log appendTo this (using Easy Connect Method):
/u01/app/oracle/product/11.2.0/dbhome_1/bin/rman target sys/viviet@localhost:1521/VVSMS log /home/oracle/log_rman/vvsms.log appendWhere:
localhost: your local node
VVSMS : is the service of database
Also check if "/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora" have configured the line "NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)"
P.S : When RMAN start a session it show where is logged, check on logs what instance RMAN was logged.
HTH,
Levi Pereira

I get errors when uploading to Facebook from in Lightroom 4?

I have looked thoroughly for an answer/fix to this and cannot find one. http://forums.adobe.com/message/4326179#4326179 did not work.
I hit 'Publish' to upload new photos. It goes like normal and then when done comes with, "(Error) Photo upload failed, but no error sting was returned from facebook." I hit 'OK.' Then another error comes up, "(Warning) Can't update this collection. Photo upload failed, but no error sting was returned from facebook."
It used to come up with this and be able to upload some photos, and I would have to keep doing this until are were uploaded. Now, I have 4 photos to upload and have tried for about 2 weeks just publishing. I will also have more photos to publish soon.

Try the 4.4RC - there are some Facebook related fixes http://labs.adobe.com/technologies/lightroom4-4/

Getting error when reading xml file from a remote connection

Hi all,
I want to read an xml file from a remote connection, not from my local machine.So when i am creating the data server i am giving the host name(that is the ip of the machine where the xml file is located), giving the proper username and password and giving the path of the xml file. When i am testing the connection the error that is coming:- "Connection failed and the xml file could not be created, verify that you have write permission in the directory"...
but read write and execute permissions have been given on the directory as well as to the file...
Regards,
Sourav

Hi Sutirtha,
Initially I have started the agent.sh giving the agent name <agent name>and port number 20910 and defined it in the topology manager it is showing that the agent test is succesful. Then I tested a particular Data server against that agent and the test was successful.
After this we had stopped the agent and restarted it.
However now suddenly the testing against the remote agent is failing with the following excep:
java.lang.Exception:
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.s(pm.java)
     at com.sunopsis.graphical.l.pm.g(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.l.pm.q(pm.java)
     at com.sunopsis.graphical.l.pm.<init>(pm.java)
     at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
     at com.sunopsis.graphical.frame.bo.w(bo.java)
     at com.sunopsis.graphical.frame.bo.d(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
PS: do i have to modify any file after or before starting the odi agent
Thnks and Rgds,
Sourav
Edited by: user13263578 on Mar 15, 2011 9:35 PM
Edited by: user13263578 on Mar 15, 2011 9:48 PM

Getting error when calling Java program from JSP page.

Hi All,
I'm getting below error msg, previously the page use to display and also java program use to run properly, but suddenly today i came across this error. May be some settings have been changed on my server, since number of developers uses this common webserver here.
Any help would be much appreciated. Pls let me know if if anyone requires much info regarding this one.
javax.servlet.ServletException: sun/tools/javac/Main
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at java.lang.Throwable.fillInStackTrace(Compiled Code)
     at java.lang.Throwable.(Compiled Code)
     at java.lang.Exception.(Compiled Code)
     at javax.servlet.ServletException.(Compiled Code)
     at org.apache.jasper.servlet.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.tomcat.core.ServletWrapper.doService(Compiled Code)
     at org.apache.tomcat.core.Handler.service(Compiled Code)
     at org.apache.tomcat.core.ServletWrapper.service(Compiled Code)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward
Root cause:
java.lang.NoClassDefFoundError: sun/tools/javac/Main
     at org.apache.jasper.compiler.SunJavaCompiler.compile(Compiled Code)
     at org.apache.jasper.compiler.Compiler.compile(Compiled Code)
     at org.apache.jasper.servlet.JspServlet.doLoadJSP(Compiled Code)
     at org.apache.jasper.servlet.JasperLoader12.loadJSP(Compiled Code)
     at org.apache.jasper.servlet.JspServlet.loadJSP(Compiled Code)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(Compiled Code)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(Compiled Code)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(Compiled Code)
     at org.apache.jasper.servlet.JspServlet.service(Compiled Code)
Message was edited by:
shukla_arvind

did u happen to upgrade ur jdk?????

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word"

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme to resolve
this issue.

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded.

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded. I tried everything from reseting Firefox ,completely new installation of firefox to about.config and nothing worked it's been two days now since the problem started and i am pretty frustrated and desperate as i try to fix the issue so please help me with some solutions????
Big thanks in advance

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved

I cant sync my iphone 5s on windows itunes, keep getting error message unable to load dataclass information from sync services.

i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
I have tried uninstalling itunes and re-installing it.
Turning off firewall and antivirus.
Has anyone had this before and if so how did you over come this issue?
Thanks in advance

Hey troyboi12345,
Thanks for using Apple Support Communities.
To troubleshoot this issue, follow this article.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Have a nice day,
Mario

Getting error when try to load from R3 to bw after the patches

Similar Messages

Maybe you are looking for