Getting error when trying to activate BW Stats

Hi,
We are getting this error:
Log not found (in main memory)
Message no. BL207
This happens when we go into Tools --> BW Statistics for InfoPrividers. and then select all the check boxes (or even 1) and try to OK it.
Has anyone seen this error? or know what the problem might be?

Hi All,
Do you find the solution for this. i am facing this problem as well... is there any memory parameter i need to look into? i have searched on note and forum, but to no avail. Your kind advise is very much appreciated.
Thanks.
best regards,
Nicholas Chang

Similar Messages

HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results.

Error when trying to activate new valuation area - AU158

Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
Tks

Year end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose.

Error when trying to activate new valuation area.

Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advance

Hi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Errors when trying to activate web service

Has anybody encountered an HTTP 500 error while trying to activate a webservice based on a business object from one of the SAP namespaces?
The error that I am getting is: HTTP 500 (InternalServerError) - Dump or unhandled exception in backend.

Yes we have the same Problem. Are you using Association in your BO?
The Problem is known
This was defect in the code while trying to include
Cross Bo associations in Read Operation.
This was fixed in FP26 with Hotfix HZEK001337.
This is not yet imported into VQ3.
Solution: Wait till VQ3 is supplied with this week's hotfixes
or try to generate service without Cross BO associations till hotfix
is imported into VQ3.

Error when trying to activate Office 2013 ProPlus - (0x80070005)

Have been receiving this error message for 2 days when trying to activate Office 2013.
Please note that I do not have the option to run Office as Administrator.
ISV using VB.net and SQL Server Express

Hi,
The suggestion I would like to provide was to run Office as administrator. By "I do not have the option to run Office as Administrator", did you mean you couldn't see the option or something else?
To run an Office application as administrator, we need to find the application shortcut, right click on it, then click "Run as administrator".
For the error message you provided, I also suggest you run the System File Checker to run the sfc /scannow command to scan all protected system files and replace the incorrect versions with the correct Microsoft versions.
For a Windows 7 PC
1. Click Start > All Programs >
Accessories, and then right-click Command Prompt and choose
Run as administrator.
2. In the command prompt, type sfc /scannow and press Enter.
3. When the system scan is complete, try to install Office again.
For a Windows 8 PC
1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click
Search.)
2. Enter command prompt in the search box.
3. In the list of results, swipe down on or right-click Command Prompt, and then tap or click
Run as administrator.
4. In the Administrator: Command Prompt window, type sfc /scannow
press Enter.
5. When the system scan is complete, try to install Office again.
I hope the information is helpful.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Getting error when tried to learn the documents in OFR Designer

Hi All,
As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
Always getting the below two errors:-
1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot learn the BrainwareView : DefaultView
SERbrainware : Learn, learning error (7)
2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot create Brainware Dictionary for BrainwareView : DefaultView
SERbrainware : Create/AppendDictionary, preprocessing error (3)
Thanks in advance,
Moumi.

Hi All,
The below mentioned error were resolved after adding documents in Void Class.
Thanks,
Moumi.
Edited by: 903667 on Jan 31, 2013 8:34 PM

Getting error when trying to update apps

I'm getting this error when trying to update CC apps on my iMac:
Update Failed
Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
Has anyone experienced/resolved this issue?

Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Getting error when trying to open Job Manager

Hi List
we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
[nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
Please advice.
Thanks..

Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
Thanks,
Venkat
http://oraclebizint.wordpress.com

Getting an error when trying to activate MP !

hi guys,
I am getting following error , when i am trying to activate multi provider.
The MultiProvider definition contains an InfoObject that has not been assigned to the relevant InfoProviders.
please help
thaks

Hi Hon,
When you double click on the MP, you will be able to see all your Cubes. Also in the Right side you will be able to see the folders of MP like dimension, Unit, Time etc..
First you will need to drag & drop all the characteristics from your Cubes to Dimensions folder(You can rename it) & also Keyfigues to Keyfigure folder of MP.
Then at the top of right side left coner, you will find a icon "Identify characteristics". When you click on that, it will show you all the IO's you have dragged under DImension folder of MP along with the Checkbox & respective cubes in which that IO is present.
You will need to select the Check box(check them) & continue this for all the IO's.
Similarly there is one more button for kwyfigures beside "Identify characteristics". Select that & repeat the above step for keyfigures now.
After doing this, try to activate the MP. It should work
Hope this helps!
Regards,
Pavan

Getting error when trying to login to CR XI server on suse linux server

http://www.experts-exchange.com/Database/Reporting_/Crystal_Reports/Q_21747694.html
Hello,
I'm getting the above error when I try to login as administrator (blank password).
This did work until I rebooted the linux server.
I checked there are no port conflicts (nothing is using port 6400).
I restarted the services manually, I even rebooted server and then restarted ccm services manually but no luck. I did find this is a known problem with linux crystal reports server but nothing stated about how to resolve it.
Finding solutions in the SAP portal is difficult! This is about as user friendly as the Cisco support website. Cisco portal is AWEFUL.
I'm in process of getting a support contract from SAP but it's taking a long time.
I have to state the support from SAP is a big step DOWN from the business objects support. We were able to call and speak to engineers in a few minutes.
With SAP support I was able to talk to some foreigner (asian or indian) to tell me that there is no phone support with SAP. This after being redirected at least 4 times between departments.
Wow! So what do the other business objects customers have to say about the SAP support?
I can't help but wonder about moving on to another solution for publishing reports.
A vendor who actually gives a damn about the customers.
Oskar

this worked until I rebooted the server.
I'm getting error showing it's trying to connect to a mysql database 'BOE115'.
This server does have a mysql db running on it, but that db has no instance of BOE115.
It also shows it's trying to connect as a user that isn't on the database.
Where can I see the script with user/password that is trying to run and connect to the mysql db?
Also, why didn't the install create the instance and user?
Why did this work until I rebooted?
There is no firewall on this server, that has been disabled.
Thank you,
Oskar

Getting error when trying to activate BW Stats

Similar Messages

Maybe you are looking for