Getting error when trying to add authorzation in ERM (AC 5.3_SP,)

Hi Experts,
I have created a role in ERM and successfully saved it, when trying to add authorization by selecting the functional area->selected the functional are(procurement dept.) -> next i clicked on the authorization data-> aded one row ->when searching for the function id from the description field, it's searching for some time and after that, getting the follwing error .
"Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://xiserver.ep.in:50000/VirsaCCFunction5_0Service/Config1?wsdl&style=document"
Please do help.
Best Reagrds,
Gurugobinda
Edited by: gurugobinda harichandan parida on Sep 10, 2009 6:29 PM

Hi Alpesh and Zaher,
Thanks a lot for all your help and support.
After applying the note 1279722 my error got resolved, but after that when I am going to the next step to maintain PFCG it is giving me the error as: "Unhandled error; Function template PRGN_CHECK_ROLE_EXISTScould not be retrieved from CPD".
Please do suggest.
Regards,
Gurugobinda

Similar Messages

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Error when trying to add transitions and titles

I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
thanks!

Hi minD:
This error usually indicates an OS problem, rather than iMovie problem.
Prevent Mac Disasters
Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
(Article is in 3 parts, don't miss parts 2 and 3)
Sue
(Thanks to Lennart Thelander for the copy & paste)

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

FRM-40735 Error when trying to add an employee as key member for a project

FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

Error ORA-06502 says PL/SQL: numeric or value error.
The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
AB

Error When Trying To Add Web Clipping

Receiving the following error in the Apache error log when trying to add a webClipping portlet:
[Sun Feb 1 08:17:25 2004] [info] [client 141.146.192.68] MOD_OC4J_0007: Oc4j process unique id:
C_130.35.162.13.11a3ac.f52e368ff8.-8000#titsto_iasmt.auohsitst03.oracleoutsourcing.com#391727#OC4J_Portal#OC4J_Portal#default_island parsed from cookie of session request: /portalTools/webClipping/htdocs/wcstudio/jsp/toolbar.jsp does not match to oc4j instance with destination name: OC4J_Portal. Ignore this cookie.
The error "WCS-102" shows up on the web - page while trying to add a webClipping portet.
We have installed JPDK 9.0.2.6.2 over 9.0.2.6.1 and redeployed jpdk and portalTools. Note that the middle tier is a two node RAC.

Sorry to resurrect this old topic - but was a solution found for this? I'm having the same problem.

Getting error when tried to learn the documents in OFR Designer

Hi All,
As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
Always getting the below two errors:-
1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot learn the BrainwareView : DefaultView
SERbrainware : Learn, learning error (7)
2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot create Brainware Dictionary for BrainwareView : DefaultView
SERbrainware : Create/AppendDictionary, preprocessing error (3)
Thanks in advance,
Moumi.

Hi All,
The below mentioned error were resolved after adding documents in Void Class.
Thanks,
Moumi.
Edited by: 903667 on Jan 31, 2013 8:34 PM

Getting error when trying to update apps

I'm getting this error when trying to update CC apps on my iMac:
Update Failed
Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
Has anyone experienced/resolved this issue?

Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Error when trying to add a project to Subversion source control

When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
"There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
Does anyone have a clue what the problem (and a solution) might be?
Thanks,
Theo.

Hi,
Davin mentioned:
This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
The OPM help on collaborating mentions:
Open a rulebase project from source control
To open an existing Oracle Policy Modeling project from a source control repository:
In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
Is this caused by an installation error or part of the "issue with the source control integration" ?
Please let me know if I'm the only one experiencing this problem ....
Thankx,
Paul

Getting error when trying to open Job Manager

Hi List
we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
[nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
Please advice.
Thanks..

Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
Thanks,
Venkat
http://oraclebizint.wordpress.com

Getting error when trying to add authorzation in ERM (AC 5.3_SP,)

Similar Messages

Maybe you are looking for