Getting error when trying to back up

I am getting the follow message when trying to back up. The backup disk image “/Volumes/Data-1/Macintosh.sparsebundle” could not be accessed (error -1). What does this mean?

See # C17 in Pondini's excellent support document....Time Machine --- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Similar Messages

Getting error when trying to back up ipod touch 5

I am trying to back up my daughters ipod touch 5 and it just says it can't because there is an error. i have rebooted the ipod and the laptop(HP) but still happens. Any ideas?

What is the wording of the error message?
Maybe:
iOS: Troubleshooting backup issues in iTunes

HT3546 I get an error when trying to back up on my TC. Message says - The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error -1).

I get an error when trying to back up on my TC. Message says - The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1).
Any suggestions

See here...
https://discussions.apple.com/message/20933934#20933934

Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Getting error when trying to update apps

I'm getting this error when trying to update CC apps on my iMac:
Update Failed
Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
Has anyone experienced/resolved this issue?

Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Getting error when trying to open Job Manager

Hi List
we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
[nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
Please advice.
Thanks..

Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
Thanks,
Venkat
http://oraclebizint.wordpress.com

Getting error when tried to learn the documents in OFR Designer

Hi All,
As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
Always getting the below two errors:-
1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot learn the BrainwareView : DefaultView
SERbrainware : Learn, learning error (7)
2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot create Brainware Dictionary for BrainwareView : DefaultView
SERbrainware : Create/AppendDictionary, preprocessing error (3)
Thanks in advance,
Moumi.

Hi All,
The below mentioned error were resolved after adding documents in Void Class.
Thanks,
Moumi.
Edited by: 903667 on Jan 31, 2013 8:34 PM

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

Getting error when trying to login to CR XI server on suse linux server

http://www.experts-exchange.com/Database/Reporting_/Crystal_Reports/Q_21747694.html
Hello,
I'm getting the above error when I try to login as administrator (blank password).
This did work until I rebooted the linux server.
I checked there are no port conflicts (nothing is using port 6400).
I restarted the services manually, I even rebooted server and then restarted ccm services manually but no luck. I did find this is a known problem with linux crystal reports server but nothing stated about how to resolve it.
Finding solutions in the SAP portal is difficult! This is about as user friendly as the Cisco support website. Cisco portal is AWEFUL.
I'm in process of getting a support contract from SAP but it's taking a long time.
I have to state the support from SAP is a big step DOWN from the business objects support. We were able to call and speak to engineers in a few minutes.
With SAP support I was able to talk to some foreigner (asian or indian) to tell me that there is no phone support with SAP. This after being redirected at least 4 times between departments.
Wow! So what do the other business objects customers have to say about the SAP support?
I can't help but wonder about moving on to another solution for publishing reports.
A vendor who actually gives a damn about the customers.
Oskar

this worked until I rebooted the server.
I'm getting error showing it's trying to connect to a mysql database 'BOE115'.
This server does have a mysql db running on it, but that db has no instance of BOE115.
It also shows it's trying to connect as a user that isn't on the database.
Where can I see the script with user/password that is trying to run and connect to the mysql db?
Also, why didn't the install create the instance and user?
Why did this work until I rebooted?
There is no firewall on this server, that has been disabled.
Thank you,
Oskar

Getting error when trying to download deployed software package

Hello all, I have been struggling with this for almost two weeks and am about to give up. The error I'm getting is when a client tries to download a deployed software package. The software shows up in IE browser (servername\cmapplicationcatalog),
but when I click install it errors out saying can't install or request software. I am not a network guru and did not setup SCCM but need a little (maybe a lot) guidance. I have looked at log files till my eyes are ready to fall out but just not
sure what I am looking for.
In ccmmessaging.log, I see this error "No reply message from Server. Server may be temporarily down or a transient network error" and this after "http://servername/ccm_system/request failed
with 0x8000000a"
Here comes the weird part, I had this working, successfully deployed twice to two clients. The next day I came in to work and it was broke. I have no clue what could have changed over night to cause
this issue. If someone could maybe lend a hand troubleshooting, I would be most grateful.
Many thanks in advance!!
Rob

Hi,
Please review the link below, here is a useful article for you.
Tips and Tricks for Deploying the Application Catalog in System Center 2012 Configuration Manager
http://blogs.technet.com/b/configmgrteam/archive/2012/07/05/tips-and-tricks-for-deploying-the-application-catalog-in-system-center-2012-configuration-manager.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Getting error when trying to download update for flash player with OSX 10.91

Trying everything to download update for Adobe Flash Player. This is maddening. I have tried uninstalling previous player and re-installing and checked my preferences. Can any one give me some instructions that are easy to understand. I keep getting an error when installing.

There usually is an Adobe flash uninstaller that goes through a process satisfactorily.
Did you get the Adobe Flash update from their
page, directly? http://get.adobe.com/flashplayer/
Also note the extensive info at Adobe link below.
If you are having trouble, or Safari is involved, if
you use a different browser, such as Firefox, etc to
get that version Flash update. There's another thing to
look into, in Mavericks, that older OS X didn't
have, that may affect installation...
In System Preferences, find a Flash Player preference
under "Other." Click on the Advanced tab and then "Check
Now" in the Updates section. An available new one
would be installed. There is a similar issue/answer
in the following solved ASC discussion thread:
https://discussions.apple.com/message/21189654#21189654
•Adobe Flash Player - Installation Problems - Mac OS X:
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
Hopefully this helps.
Good luck & happy computing!

Getting error when trying to add authorzation in ERM (AC 5.3_SP,)

Hi Experts,
I have created a role in ERM and successfully saved it, when trying to add authorization by selecting the functional area->selected the functional are(procurement dept.) -> next i clicked on the authorization data-> aded one row ->when searching for the function id from the description field, it's searching for some time and after that, getting the follwing error .
"Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://xiserver.ep.in:50000/VirsaCCFunction5_0Service/Config1?wsdl&style=document"
Please do help.
Best Reagrds,
Gurugobinda
Edited by: gurugobinda harichandan parida on Sep 10, 2009 6:29 PM

Hi Alpesh and Zaher,
Thanks a lot for all your help and support.
After applying the note 1279722 my error got resolved, but after that when I am going to the next step to maintain PFCG it is giving me the error as: "Unhandled error; Function template PRGN_CHECK_ROLE_EXISTScould not be retrieved from CPD".
Please do suggest.
Regards,
Gurugobinda

Getting error when trying to back up

Similar Messages

Maybe you are looking for