Getting error when trying to launch a game through game center

I am trying to launch Pinball HD from Game Center but always get connection errors. For instance, I receives the error "The requested operation could not be completed due to an error communicating with the server". I am also getting "a server with the specified hostname could not be found"
I am connecting through Wi-Fi. Any particular setting I need to specify in my router?

Wow. Did not expect an answer so fast! Unfortunately for me, the progress indicator keeps spinning for a long time before it comes back with an error. My internet connection is working. Is there a way to know what server it tries to connect to. I could probably run some tracing tools from there.

Similar Messages

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

[Solved]getting error when trying to launch kate in terminal

i'm wondering why i'm getting this error message when trying to open a file with kate using root in standard terminal
eg su
kate /home/user/document
and i'm getting this error mesage
No protocol specified
kate: cannot connect to X server :0.0
when i try the same method with user account it work perfectl
kate /home/user/document
no error
when i'm trying to open firestarter with root i get this kind message
No protocol specified
(firestarter:7848): Gtk-WARNING **: cannot open display: :0.0
so i try with standard user and i this kind of message
"insufficient privelige u need to be root"
Last edited by burmmo (2008-07-01 21:03:42)

You can always use
xhost + localhost
But the real solution lies here...

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Error when trying to access a form through https

Hi,
I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
I'm accessing the form through webcache.
the error:
Java Plug-in 1.6.0_37
Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Users\Carlos
c:   borrar ventana de consola
f:   finalizar objetos en la cola de finalización
g:   liberación de recursos
h:   presentar este mensaje de ayuda
l:   volcar lista del cargador de clases
m:   imprimir sintaxis de memoria
o:   activar registro
q:   ocultar consola
r:   recargar configuración de norma
s:   volcar propiedades del sistema y de despliegue
t:   volcar lista de subprocesos
v:   volcar pila de subprocesos
x:   borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
cargar: clase oracle.forms.engine.Main no encontrada.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
Regards
Carlos

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
I need to install this so that i can transfer my contacts and calendar to my laptop

Hi and Welcome to the Community!
Sorry to be dense, but what happens when you do exactly as the message instructs?
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why do I get the 'PowerPC code' error when trying to launch an Intel-based app from a CD?

When trying to launch a Flash-based app from a CD on my Mac Book Pro, I get the "PowerPC apps are no longer supported" error. Yet the app is not built with PowerPC code.
This also happened with Microsoft Office programs soon after I upgraded to OSX Lion, but someone was able to solve that for me.

It's just a free disc from a photo magazine, but the app runs fine on a Mac Pro running 10.7.3. Could it be hardware related?
I have actually asked this on behalf of a reader (I work for the company that makes the magazine) who is experiencing this problem, I just can't find any reason why the error would display in these circumstances. I apologise if this is against the community's usual practise - I just want to sort this guy out!
The app on the disc is compiled using MDM Zinc, but like I said it runs a-OK on Lion everywhere else.
Any help would be gratefully received and appreciated!

Getting a error when trying to launch brtools

Hi all,
Could anyone please help getting the following error while trying to launch brtools.
ukbsfspg:tnxadm 35> brtools
BR0651I BRTOOLS 7.00 (32)
BR0252E Function stat() failed for '/usr/sap/TNX/SYS/exe/run/brarchive' at location BrFileStatGet-1
BR0253E errno 13: Permission denied
BR0273E Determination of file status for /usr/sap/TNX/SYS/exe/run/brarchive failed
BR0280I BRTOOLS time stamp: 2009-12-24 19.04.52
BR0654I BRTOOLS terminated with errors
Should i change the permissions.COuld anyone advise.Thanks in advance.

As recommended by sap in SAP note 113747, BRTOOLS (utilities) should have below file permissions for a smooth run.
brarchive, brbackup, brconnect, brtools have permission 4775:
-rwsrwxr-x ora<sid> sapsys ...
These can be started by the ora<sid> or the <sid>adm OS user.
brrestore, brrecover, brspace, and sapdba have permission 755:
-rwxr-xr-x <sid>adm sapsys ...
These can only be started by the ora<sid> OS user.
Regards
Nick Loy

Getting error when trying to open Job Manager

Hi List
we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
[nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
Please advice.
Thanks..

Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
Thanks,
Venkat
http://oraclebizint.wordpress.com

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Getting error when trying to update apps

I'm getting this error when trying to update CC apps on my iMac:
Update Failed
Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
Has anyone experienced/resolved this issue?

Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Getting error when tried to learn the documents in OFR Designer

Hi All,
As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
Always getting the below two errors:-
1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot learn the BrainwareView : DefaultView
SERbrainware : Learn, learning error (7)
2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot create Brainware Dictionary for BrainwareView : DefaultView
SERbrainware : Create/AppendDictionary, preprocessing error (3)
Thanks in advance,
Moumi.

Hi All,
The below mentioned error were resolved after adding documents in Void Class.
Thanks,
Moumi.
Edited by: 903667 on Jan 31, 2013 8:34 PM

Error when trying to launch iTunes! Help!

Hi!
I've tried to seek through the forums to find someone with the same error, but i haven't found anyone.
Here's the problem:
When i try to launch iTunes I get a Windows Error saying that iTunes har encountered a problem and has to quit. It's that kind of error where you can send an error-report. And when I try to restart Windows, I get the same error when I log on. Please help! I've tried to reintall and repair iTunes, but it won't help.
iPod Mini Windows XP Pro Sygate Personal Firewall Pro, F-Secure Antivirus 06

hi
I had this same problem for ages and tried all sorts
of things. I think the problem was Quicktime
actually, but what eventually worked was:-
Uninstall itunes, then reboot. Close the Quicktime
program tray icon (lower right corner of taskbar) and
uninstall Quicktime. Then install the standalone of
Quicktime before installing itunes again.
Hope this helps.
Thanks!
I'll try it out! Havent't thought of that.
Will come back to say if it worked.

Getting following error when trying to run my application through eclipse

Hi
i am getting following error when i am trying to execute my program from my eclipse id 3.2 .Plz help me .I have also increase jvm memory upto 256M but it doesnt work.
[java] E:\tarun\java\workspace1\Nss_Gui\main\build.xml:62: java.io.IOException: CreateProcess: "C:\Program Files\Java\jre1.5.0_05\bin\java.exe" -Xmx100M -classpath E:\tarun\java\workspace1\Nss_Gui\main\output;E:\tarun\java\workspace1\Nss_Gui\main\conf;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryRequest.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryResponse.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Cdr.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$2.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Event.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor�
[java] at org.apache.tools.ant.taskdefs.Java.fork(Java.java:758)
[java] at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:171)
[java] at org.apache.tools.ant.taskdefs.Java.execute(Java.java:84)
[java] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[java] at org.apache.tools.ant.Task.perform(Task.java:364)
[java] at org.apache.tools.ant.Target.execute(Target.java:341)
[java] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[java] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[java] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[java] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[java] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[java] at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[java] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[java] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
[java] Caused by: java.io.IOException: CreateProcess: "C:\Program Files\Java\jre1.5.0_05\bin\java.exe" -Xmx100M -classpath E:\tarun\java\workspace1\Nss_Gui\main\output;E:\tarun\java\workspace1\Nss_Gui\main\conf;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryRequest.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryResponse.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Cdr.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$2.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Event.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor�
[java] at java.lang.ProcessImpl.create(Native Method)
[java] at java.lang.ProcessImpl.<init>(Unknown Source)
[java] at java.lang.ProcessImpl.start(Unknown Source)
[java] at java.lang.ProcessBuilder.start(Unknown Source)
[java] at java.lang.Runtime.exec(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
[java] at java.lang.reflect.Method.invoke(Unknown Source)
[java] at org.apache.tools.ant.taskdefs.Execute$Java13CommandLauncher.exec(Execute.java:834)
[java] at org.apache.tools.ant.taskdefs.Execute.launch(Execute.java:435)
[java] at org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:449)
[java] at org.apache.tools.ant.taskdefs.Java.fork(Java.java:751)
[java] ... 13 more
[java] --- Nested Exception ---
[java] java.io.IOException: CreateProcess: "C:\Program Files\Java\jre1.5.0_05\bin\java.exe" -Xmx100M -classpath E:\tarun\java\workspace1\Nss_Gui\main\output;E:\tarun\java\workspace1\Nss_Gui\main\conf;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryRequest.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\GuiXmlQueryResponse.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Cdr.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor$2.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\CdrDescriptor.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\Event.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor$1.class;E:\tarun\java\workspace1\Nss_Gui\main\output\com\ardit\nss\common\model\cdr\EventDescriptor�
[java] at java.lang.ProcessImpl.create(Native Method)
[java] at java.lang.ProcessImpl.<init>(Unknown Source)
[java] at java.lang.ProcessImpl.start(Unknown Source)
[java] at java.lang.ProcessBuilder.start(Unknown Source)
[java] at java.lang.Runtime.exec(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
[java] at java.lang.reflect.Method.invoke(Unknown Source)
[java] at org.apache.tools.ant.taskdefs.Execute$Java13CommandLauncher.exec(Execute.java:834)
[java] at org.apache.tools.ant.taskdefs.Execute.launch(Execute.java:435)
[java] at org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:449)
[java] at org.apache.tools.ant.taskdefs.Java.fork(Java.java:751)
[java] at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:171)
[java] at org.apache.tools.ant.taskdefs.Java.execute(Java.java:84)
[java] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[java] at org.apache.tools.ant.Task.perform(Task.java:364)
[java] at org.apache.tools.ant.Target.execute(Target.java:341)
[java] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[java] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[java] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[java] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[java] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[java] at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[java] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[java] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)

javax.el.PropertyNotFoundException: Target Unreachable, 'oracle' returned null
The managed bean property 'oracle' is not found with the specified EL expression. What is the EL expression used and what is the managed bean property?

Getting error when trying to login to CR XI server on suse linux server

http://www.experts-exchange.com/Database/Reporting_/Crystal_Reports/Q_21747694.html
Hello,
I'm getting the above error when I try to login as administrator (blank password).
This did work until I rebooted the linux server.
I checked there are no port conflicts (nothing is using port 6400).
I restarted the services manually, I even rebooted server and then restarted ccm services manually but no luck. I did find this is a known problem with linux crystal reports server but nothing stated about how to resolve it.
Finding solutions in the SAP portal is difficult! This is about as user friendly as the Cisco support website. Cisco portal is AWEFUL.
I'm in process of getting a support contract from SAP but it's taking a long time.
I have to state the support from SAP is a big step DOWN from the business objects support. We were able to call and speak to engineers in a few minutes.
With SAP support I was able to talk to some foreigner (asian or indian) to tell me that there is no phone support with SAP. This after being redirected at least 4 times between departments.
Wow! So what do the other business objects customers have to say about the SAP support?
I can't help but wonder about moving on to another solution for publishing reports.
A vendor who actually gives a damn about the customers.
Oskar

this worked until I rebooted the server.
I'm getting error showing it's trying to connect to a mysql database 'BOE115'.
This server does have a mysql db running on it, but that db has no instance of BOE115.
It also shows it's trying to connect as a user that isn't on the database.
Where can I see the script with user/password that is trying to run and connect to the mysql db?
Also, why didn't the install create the instance and user?
Why did this work until I rebooted?
There is no firewall on this server, that has been disabled.
Thank you,
Oskar

Getting error when trying to launch a game through game center

Similar Messages

Maybe you are looking for