Getting error while activating Infosource
Hi Bw Guru's
I have enhanced 3.x data source with new fields and replicated the same in BI.
I have created Transfermation between DS(Data Source) and Infos source(IS).
Then created Transfermation btween IS and Data target DSO.
Our data source feeding more than one data target.
What i done is included new info object in IS and try to activate it where i am getting error say that
Error message "You use this key to determine how you want to use aggregation in the transformation."
Please advise me in this issue
Hi Aryan,
I understood your scenario..
See what yuo have..
Data Source <--transformation->Infosource<-transformation->Data target..
When you modify the Infosource and try to activate it, it gives error, because there are two transformations that are dependent on this infosource.. and on trying to activate they become inconsistent..
The best approach i would suggest is, delete both the transformations.. If they contain routines, just copy them in to notepad and keep aside..
Make changes to info source and activate it..
Now recreate the transformations.. paste the routines if there were any and activate the transformations.. this wont take too much effort as creating the transformation is not a big deal..
And i feel that the error you are getting is because of the transformation between IS and Data target.. so try by only deleting it first..
Thanks and Best Regards,
Vikas Bittera.
Similar Messages
-
Getting error while activating the template in sharepoint2013
Hi,
I am getting the following error while activating template in SharePoint-2013.
Please guide me on this.Thanks in advance.can you provide error details from ULS logs using correlation Id
http://www.sharepoint-journey.com/powershell.html
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
Getting error while activating the smart form
hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is comingRefer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam -
Getting Error while activating ODS
Hi Friends,
I have created ODS, while trying to activate, i am getting the following error.
<b>Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325</b>
do u have any idea, to solve this problem
points for sure.....
Thanks in Advance
VijayaHi Vijaya,
How did you maintain the assignment ? check again, the ID is filled ?
click 'suggest source system id' and save ?
similar problems were solved with that, try to check if you miss something
Transfer Rule mapping for sourcesyestem
Error while loading master data from R/3
Red error "No source system ID exists for source system (logical system) A"
Hope this helps.
Cheers
Raj -
Getting error while activating content in sap bpc 10
HI All,
since many days i was facing an issue while loading my BPC portal .
i have applied the below medntioned notes as suggested by SAP
1) 1997203
2) 2025612
i have also tried to activate the content by running program : UJS_ACTIVATE_CONTENT
but after implementing i am getting the attached errors
as a result i am unable to login in bpc front end
getting the message as 500-internal server errror
u have no access to any enviornment
Kindly Suggest
Best Regards
Bhupendra AryaDear Astha,
i have checked all my roles n authorizations
all are the same
i guess thats is not an issue
Best Regards
Bhupendra arya -
Getting error while Active dricetory configuration in WL 10.2
Hi
I am grtting following while conneting to ldap server, I have configured security realms. It is fine because I can see all user at User and Group tab, but when I click on any link over that page it run me this error on server consol...
<Feb 23, 2009 2:15:03 PM IST> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090252]advance error for cursor name Users195456232
at weblogic.security.providers.authentication.LDAPAtnDelegate.advance(LDAPAtnDelegate.java:1213)
at weblogic.security.providers.authentication.LDAPAuthenticatorImpl.advance(LDAPAuthenticatorImpl.java:66)
at weblogic.security.providers.authentication.ActiveDirectoryAuthenticatorMBeanImpl.advance(ActiveDirectoryAuthenticatorMBeanImpl.java:239)
at sun.reflect.GeneratedMethodAccessor422.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:443)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:377)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:375)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:310)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1408)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1245)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1348)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:782)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at javax.management.remote.rmi.RMIConnectionImpl_1001_WLStub.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
at $Proxy72.advance(Unknown Source)
at com.bea.console.utils.security.UserUtils.getUsers(UserUtils.java:88)
at com.bea.console.actions.security.users.UserTableAction.getCollection(UserTableAction.java:94)
at com.bea.console.actions.security.ManagementBaseTableAction.execute(ManagementBaseTableAction.java:87)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:251)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1170)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:290)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:426)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:712)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:188)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:142)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:377)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:253)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:206)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:191)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: netscape.ldap.LDAPReferralException: referral (0)
ldap://DomainDnsZones.inet.quintiles.com/DC=DomainDnsZones,DC=inet,DC=quintiles,DC=com
at netscape.ldap.LDAPConnection.checkMsg(Unknown Source)
at netscape.ldap.LDAPConnection.checkSearchMsg(Unknown Source)
at netscape.ldap.LDAPSearchResults.fetchResult(Unknown Source)
at netscape.ldap.LDAPSearchResults.hasMoreElements(Unknown Source)
at weblogic.security.providers.authentication.LDAPAtnNameList.advance(LDAPAtnNameList.java:99)
at weblogic.security.providers.authentication.LDAPAtnDelegate.advance(LDAPAtnDelegate.java:1210)
... 117 more
>
Please help me out and tell me any link where I can read more about Active Dricetory (AD) configuration in Weblogic 10.2.
ThanksIts resolved now it was because of an access issue.
-
Getting Error while activating data in 0FI_GL_4 DSO level (SIDs)
Hi
I have succesfully loaded data for the 0FI_GL_4 for two DSOs One is successful but for other DSO, it is failing on activation with the following errors: -
*Value '! OTS Harness' (hex. '210020004F005400530020004800610072006E006500730073') of characteristic 0POSTXT contains invalid characteristics
*Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0POSTXT
*Process 000266 returned with errors
I have the '!' as a permitted charcter in RSKC but, the text is starting with the char "!" that is why it is throwing an error.
Now how can I edit these records in PSA without effecting the first DSO which is successful.
DSO settings:
SID Generation --> During Activation.Hi,
DSO1 - Successfully loaded and DSO2 - load failed.
One dso was loaded data and another got failed.
In such case try below method.
You can make request red at DSO1 and delete it.
Make failed request red at dso2 level.
Later delete the failed request from DSO2. this makes that as latest request not loaded to your dsos.
After that go to your PSA and open latest request which was not loaded to dso.
display latest request data from psa and find your wrong record based on filter on 0POSTXT.
Once you find wrong record, select record and edit and save it.
Again re run your dtp and activate dso data.
Thanks -
Error while activating Trnasfer rules
I am getting the following error, while activating Infosource. Can you please help me identifying the solution
Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
Diagnosis
"ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or ...Hi,
Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
1. Drop the Source System
2. Re-Create the Source System.
3. For other than PC Files, "Replicate the DataSources" in the Source System.
4. Try mapping the transfer rules / structure and activate it.
Also check the SAP Note no :147195
Hope this works.
Regards
Pavan Prakhya -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error while activating Transfer Structure
Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish -
Getting Runtime Error while Activating Characteristics in BW sandbox system
Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AMHi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards. -
Error while activating transfer structure and communication structure.
Hi all,
I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
I mean same datasource comming from two R/3 instances and connecting to one infosource.
<b>Maximum length of segment is 1000 characters, current length is 2567</b>
Please let me know.
thanks,
Sabrina.Hi Sabrina...
there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
Anyway, it suggests:
"the transfer method in the transfer rules must be set to TRFC with ODS"
Hope it helps!
Bye,
Roberto -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel
Maybe you are looking for
-
I can't update my iPhoto after upgrading to Maverick
I just upgraded to Mavericks and ever since, my iPhoto (v. 9.2) will not work. It has a grey circle with a line through it over the application. I do see in my app store I have an update for iPhoto 11, but when I try to upgrade it and enter my apple
-
Error While Creating Delivery : "Quantity falls below minimum Inventory"
Hi All, I have an error while creating a delivery in BusinessOne. I have created a new item using the BusinessOne UI. And i created the salesOrder for this item and it was created successfully. But when i tried to create a salesDelivery for this
-
Original posting: https://forums.adobe.com/message/6529108#6529108 As per support suggestion: The discussion is posting again to obtain answer from adobe staff === Illustrator is not working as it should... I want them to compare the original size a
-
Create a report same as KSB1 and add WBS line item details in the output
Hello Everyone, I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3. What is the right way of doing it? Please advice. COEP is pretty huge i
-
Recently I've created a new itunes account without credit,but unfortunately fail to buy any free apps. When I press the "download" button, a pop-up appear and ask me to complete the billing info. The point is that many of my friends can buy free apps