Getting Error while creating Calculation view.

Hi Expert,
I was trying to create one simple calculation view using SQL script but getting below error.
/********* Begin Procedure Script ************/
BEGIN
create type var_out1 as table (ebeln varchar(10),menge decimal);
        var_out = CE_COLUMN_TABLE ("SAPEH2"."EKKO",[EBELN,AEDAT] );
        var_out1 = CE_COLUMN_TABLE ("SAPEH2"."EKPO",[EBELN,MENGE] );
        var_out2 - CE_UNION_ALL (:var_out1,:var_out2);
END
/********* End Procedure Script ************/
I thought , i might need to declare a table type for output table var_out1 and var_out2. I tried by declaring table like below couldn't get any success.
create type var_out1 as table (ebeln varchar(10),menge decimal);
create type var_out2 as table (ebeln varchar(10), aedat DATE ,menge decimal);
error:
Message :
     Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Deploy Calculation View: SQL: sql syntax error: CREATE TYPE is not allowed in SQLScript: line 5 col 2 (at pos 277)nSet Schema DDL statement: set schema "SAPEH2"nType DDL: create type "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc/tabletype/VAR_OUT" as table ("EBELN" VARCHAR(10), "AEDAT" DATE, "MENGE" DECIMAL(13,3))nProcedure DDL: create procedure "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc" ( OUT var_out "_SYS_BIC"."pkg-sapuser03.test_giri/CA_SALES1/proc/tabletype/VAR_OUT" ) language sqlscript sql security definer reads sql data as n /********* Begin Procedure Script ***********/ n BEGIN n n create type var_out1 as table (ebeln varchar(10),menge decimal);n create type var_out2 as table (ebeln varchar(10), aedat DATE ,menge decimal);n n t   var_out = CE_COLUMN_TABLE ("SAPEH2"."EKKO",[EBELN,AEDAT] );n t   var_out1 = CE_COLUMN_TABLE ("SAPEH2"."EKPO",[EBELN,MENGE] );n t   var_out2 - CE_UNION_ALL (:var_out1,:var_out2);nnEND /******** End Procedure Script ************/n
Could you please help me to understand the cause of this?
Thanks,
Girdhari

Hi Lars,
Thanks for the reply.
If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
Thanks,
Girdhari

Similar Messages

Syntax error while creating Calculation view script based

Hi Folks,
I'm creating Calc view based on script and drafted a simple code but I'm getting syntax error.
Its just fetching few coloumns from two tables products and purchaseorderitem.
/********* Begin Procedure Script ************/
BEGIN
var_out = select productid , category, nameid, currency, grossamount, quantity
FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS B
where P.productid = B.productid;
END /********* End Procedure Script ************/
Could you pls take a look and let me know what wrong I'm doing?
Error logs are:-
sap.hana..package.project.folder.mytest.CALCSCRIPTVIEWInternal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Deploy Calculation View: SQL: sql syntax error: incorrect syntax near "democontent": line 5 col 18 (at pos 439)nSet Schema DDL statement: set schema "SYSTEM"nType DDL: create type "_SYS_BIC"."sap.hana..package.project.folder.mytest/CALCSCRIPTVIEW/proc/tabletype/VAR_OUT" as table ("PRODUCTID" NVARCHAR(10), "CATEGORY" NVARCHAR(2), "NAMEID" NVARCHAR(10), "CURRENCY" NVARCHAR(5), "GROSSAMOUNT" DECIMAL(15,2), "QUANITYT" DECIMAL(13,3))nProcedure DDL: create procedure "_SYS_BIC"."sap.hana.package.project.folder.mytest/CALCSCRIPTVIEW/proc" ( OUT var_out "_SYS_BIC"."sap.hana.package.project.folder.mytest/CALCSCRIPTVIEW/proc/tabletype/VAR_OUT" ) language sqlscript sql security definer reads sql data as n /********* Begin Procedure Script ************/ n BEGIN n t var_out = select productid , category, nameid, currency, grossamount, quantityn t FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS Bn t where P.productid = B.productid;nnEND /********* End Procedure Script ************/n

Hi Rubane,
I don't have EPM installed here but based on this Table User Defined Functions( Table UDF ) in HANA you are not properly defining the source table.
In your case missing 1) schema of EPM, 2) not using double quotes, 3) separation of package and view, 4) missing camel case on purchaseOrderItem:
FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS B
On blog:
from "SAP_HANA_EPM_DEMO"."sap.hana.democontent.epm.data::businessPartner" as a
SAP_HANA_EPM_DEMO is the schema
sap.hana.democontent.epm.data is the package
businessPartner is the view
Start simple... before the seletion try it out on Studio SQL.
Regards, Fernando Da Rós

Error while creating parameterise view

I m getting below error while creating parameterise view
CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.run_num = v_run_num
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;
AND cccs.run_num = v_run_num
ERROR at line 13:
ORA-00904: "V_RUN_NUM": invalid identifier
Plese help me in above.

Try
CREATE OR REPLACE VIEW rdr_le_info_view
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
,cccs.run_num run_num
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;Then call it like:
select *
from rdr_le_info_view
where run_num = v_run_num;

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Getting ewrror while creating GD view Extracter

Hi,
I was try to create genric extractor where i was getting error
While creating view generic extractor where i am getting error "Entry A V_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extractor which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation between these tables as like foreign key and refrence key.
Which extractor i need to create as given scenario?
Does view will fulfill with my requirement or any other extractor.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi Lars,
Thanks for the reply.
If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
Thanks,
Girdhari

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Error while creating a view

Hi All,
I am getting the below errors while creating view.
ORA-03135:connection lost contact
ORA-03134:not connected to ORACLE
Please suggest. Thanks
AJR

check this link... even this can also be a reason
Ravi Kumar

Error While Creating Materialized View

Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) desc

Hi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West

Getting Error while creating Project through API:PA_PROJECT_PUB.CREATE_PROJ

Hi Gurus,
I'm getting an error while creating a New project.
My code looks like this:
APPS.PA_PROJECT_PUB.CREATE_PROJECT
(p_api_version_number => l_object_version_number --IN Parameter
,p_commit => l_commit --IN Parameter
,p_init_msg_list => l_init_msg_list --IN Parameter
,p_msg_count => l_msg_count --OUT Parameter
,p_msg_data => l_msg_data --OUT Parameter
,p_return_status => l_return_status --OUT Parameter
,p_workflow_started => l_workflow_started --OUT Parameter
,p_pm_product_code => g_pm_product_code --IN Parameter
,p_op_validate_flag => l_op_validate_flag --IN Parameter
,p_project_in => g_project_in --IN Parameter
,p_project_out => g_project_out --OUT Parameter
,p_tasks_in => g_task_in --IN Parameter
,p_tasks_out => g_task_out --OUT Parameter
The out put params are: p_msg_count => 1
p_return_status => E
p_workflow_started => N
g_project_out.pa_project_id => 170000000000000000000
g_project_out.pa_project_number => ^
g_task_out_rec.pa_task_id => 170000000000000000000
End process record p_proj_insert => 1
Resetting the task count variable
when I checked the API code I found this:
PA_INTERFACE_UTILS_PUB.G_PROJECt_ID := null; --bug 2471668 ( not in the project context )
PA_PM_FUNCTION_SECURITY_PUB.check_function_security
(p_api_version_number => p_api_version_number,
p_responsibility_id => l_resp_id,
p_function_name => 'PA_PM_CREATE_PROJECT',
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_function_allowed => l_function_allowed
. I think I am getting the error because of this.
Now, question.
Do I need to run the Create Project from a specific Responsibility?
because when I ran the underlined query, I fpound the final status as 'N'.
I'm a HR guy and PA is a new world for me. Any help will be appreciated.
Thanks!!
Viky

You need to find any responsibility and userid that lets you create a project using the screen.
And then in your code, you need to set your context to that resp/userid.
Hope this helps
Sandeep Gandhi

Getting error while creating trigger!!

Hi Guys,
I am getting the following error while creating trigger in Oracle10g Database in TOAD environment.
Error: PLS-00306: wrong number or types of arguments in call to '='
Table details:
One of the column having BLOB Data type in the table.
In the trigger, I have compared :old and :new values.
CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_NEW(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
Any one knows about this issue, please let me know with the proper solution.
Thanks for your immediate response!
Regards,
Lakshman

CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_AUD(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
I am getting the error in line at If condition
Error: PLS-00306: Wrong number or tpyes of arguments in call '='
Please let me know if any one knows exact solution!
Thanks in advance!
Regards,
Lakshman

Getting error while creating Communication capability

Hi,
I am getting this error while creating communication capability of Host. I have successfully configured the TP communication capability. Even I have tried many times after changing the names given by me during configuration.
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: uri is unique for object Endpoint: Error -: AIP-11052: Writing following objects: Endpoint failed due to following constraint violation: ENDPOINT_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Endpoint_UK. Unique constraint violation ORA-06512: at "B2B.TRG_ENDPOINT_INS", line 17 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_ENDPOINT_INS'
Please tell me what is the source of error.
Thanks in advance.
Regards,
Anuj Dwivedi

Hi I am getting this error while creating communication capability --
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: trading Partner is unique for object Certificate: Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Certificate_UK. Unique constraint violation ORA-06512: at "B2B.TRG_CERTIFICATE_INS", line 20 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_CERTIFICATE_INS'
Please tell that where could be the problem?
Thanks.
Regards.
Anuj Dwivedi

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Getting Error while creating Calculation view.

Similar Messages

Maybe you are looking for