Getting error while creating maintenance transaction in tcode DSWP

I am getting below error when I am creating new maintenance transaction in solution manager tcode DSWP and selecting option automatically select files
Transaction must be assigned to a Standalone Product Version
When I am choosing the option select manually ,it is working fine.
please guide me from here
Thanks,
Kunal Gahlot

Hi Sri,
          The product version is maintianed correctly under SCM 7.0 EHP1.
          We are getting EWA reports regularly for the system SCM 7.0 EHP1 which we have installed.
          The only problem we are facing is in automatic selection of files in the maintenance transaction.
Regards,
Kunal Gahlot

Similar Messages

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating interest rate instrument-Tcode-FTR_CREATE.

Error while creating interest rate instrument-Tcode-FTR_CREATE.
Thanks
Vikas

Hi Tushar
Please maintain the detail in TPM 32
Product category
Product type
General valuation class
Account assignment reference
Regards

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Getting Error while creating Project through API:PA_PROJECT_PUB.CREATE_PROJ

Hi Gurus,
I'm getting an error while creating a New project.
My code looks like this:
APPS.PA_PROJECT_PUB.CREATE_PROJECT
(p_api_version_number => l_object_version_number --IN Parameter
,p_commit => l_commit --IN Parameter
,p_init_msg_list => l_init_msg_list --IN Parameter
,p_msg_count => l_msg_count --OUT Parameter
,p_msg_data => l_msg_data --OUT Parameter
,p_return_status => l_return_status --OUT Parameter
,p_workflow_started => l_workflow_started --OUT Parameter
,p_pm_product_code => g_pm_product_code --IN Parameter
,p_op_validate_flag => l_op_validate_flag --IN Parameter
,p_project_in => g_project_in --IN Parameter
,p_project_out => g_project_out --OUT Parameter
,p_tasks_in => g_task_in --IN Parameter
,p_tasks_out => g_task_out --OUT Parameter
The out put params are: p_msg_count => 1
p_return_status => E
p_workflow_started => N
g_project_out.pa_project_id => 170000000000000000000
g_project_out.pa_project_number => ^
g_task_out_rec.pa_task_id => 170000000000000000000
End process record p_proj_insert => 1
Resetting the task count variable
when I checked the API code I found this:
PA_INTERFACE_UTILS_PUB.G_PROJECt_ID := null; --bug 2471668 ( not in the project context )
PA_PM_FUNCTION_SECURITY_PUB.check_function_security
(p_api_version_number => p_api_version_number,
p_responsibility_id => l_resp_id,
p_function_name => 'PA_PM_CREATE_PROJECT',
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_function_allowed => l_function_allowed
. I think I am getting the error because of this.
Now, question.
Do I need to run the Create Project from a specific Responsibility?
because when I ran the underlined query, I fpound the final status as 'N'.
I'm a HR guy and PA is a new world for me. Any help will be appreciated.
Thanks!!
Viky

You need to find any responsibility and userid that lets you create a project using the screen.
And then in your code, you need to set your context to that resp/userid.
Hope this helps
Sandeep Gandhi

Getting error while creating trigger!!

Hi Guys,
I am getting the following error while creating trigger in Oracle10g Database in TOAD environment.
Error: PLS-00306: wrong number or types of arguments in call to '='
Table details:
One of the column having BLOB Data type in the table.
In the trigger, I have compared :old and :new values.
CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_NEW(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
Any one knows about this issue, please let me know with the proper solution.
Thanks for your immediate response!
Regards,
Lakshman

CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_AUD(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
I am getting the error in line at If condition
Error: PLS-00306: Wrong number or tpyes of arguments in call '='
Please let me know if any one knows exact solution!
Thanks in advance!
Regards,
Lakshman

Getting error while creating Communication capability

Hi,
I am getting this error while creating communication capability of Host. I have successfully configured the TP communication capability. Even I have tried many times after changing the names given by me during configuration.
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: uri is unique for object Endpoint: Error -: AIP-11052: Writing following objects: Endpoint failed due to following constraint violation: ENDPOINT_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Endpoint_UK. Unique constraint violation ORA-06512: at "B2B.TRG_ENDPOINT_INS", line 17 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_ENDPOINT_INS'
Please tell me what is the source of error.
Thanks in advance.
Regards,
Anuj Dwivedi

Hi I am getting this error while creating communication capability --
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: trading Partner is unique for object Certificate: Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Certificate_UK. Unique constraint violation ORA-06512: at "B2B.TRG_CERTIFICATE_INS", line 20 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_CERTIFICATE_INS'
Please tell that where could be the problem?
Thanks.
Regards.
Anuj Dwivedi

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Getting error while creating table from one database to other.

Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatia

hi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1

Error while creating Maintenance order

Hi,
While creating Maintenance order with any order type (PM01,PM02 & PM03) & entering material in component Tab, the system is giving this Error 'Entry does not exist,check your entry'
The used material is already maintained in the Material Master with all necessary information.
Kindly suggest the best possible solution for this problem.
Thanks in advance
Rohit8384

Hi,
The following error is coming while order processing.
Entry    does not exist - check your entry
    Message no. 00 058
Diagnosis
    Input values must be defined in Table MARA. The value or values ' ' are
    not specified in this table.
Procedure
    Check whether the input is correct and correct if necessary.
Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change
    them if necessary.
    If there is a connection to the Customizing system, you can maintain the
    system settings by choosing Maintain entries (F5)
Thanks in Advance.
Rohit

Getting error while creating Business Action with EDI EDIFACT 837 document.

Hi,
When I am trying to create a business action with EDI 837 ‘.ecs’ file, I am getting a error. It is not creating the business action. Even it is not displaying any error details.
Please help me in resolving this issue as it's very urgent.
Thanks in advance.

Hi Jyotirmoy,
What error you are getting exactly while creating the business action? Did you try to create business action for any other protocol? If not, then please try to create business action for any other protocol and check whether you are getting the same error over there also.
Regards,
Anuj

Getting Error While creating the iViews in EP.

Dear Experts,
I am getting the below error while creating the new iViews in the EP.
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/pb.
Exception id: [00142A4FD4AA006400000B0F00005BA80004CAFF2F033C5E]
Please help me to resolve this error.
Thanks & Regards,
Sachin Sable

Hi ,
Check the possible causes of error
http://help.sap.com/saphelp_nw70/helpdata/en/f4/1a1041a0f6f16fe10000000a1550b0/content.htm
and check the logs related to that exceptionid.
Koti Reddy

Getting error while creating maintenance transaction in tcode DSWP

Similar Messages

Maybe you are looking for