Getting error while creating standby database

I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)

recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram

Similar Messages

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

Error while creating standby database

Hi,
ORACLE VERSION:10.2.0.1.0
OPERATING SYSTEM:WINDOWS
While i am trying to setup a standby database i am getting the following error in my parameter file.
SQL> startup
ORA-02778: Name given for the log directory is invalid
Here is my pfile
orakill.__db_cache_size=427819008
orakill.__java_pool_size=4194304
orakill.__large_pool_size=4194304
orakill.__shared_pool_size=167772160
orakill.__streams_pool_size=0
*.audit_file_dest='E:\oracle\product\10.2.0/admin/oracle/adump'
*.background_dump_dest='E:\oracle\product\10.2.0/admin/orakill/bdump'
*.compatible='10.2.0.1.0'
*.control_files='F:\orakill/\control01.ctl','F:\orakill/\control02.ctl','F:\oradata/orakill/\control03.ctl'
*.core_dump_dest='E:\oracle\product\10.2.0/admin/orakill/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.DB_FILE_NAME_CONVERT='E:\oracle\product\10.2.0\oradata\oracle','F:\orakill\'
*.DB_NAME='oracle'
#*.db_recovery_file_dest='E:\oracle\product\10.2.0/flash_recovery_area'
*.log_archive_dest='F:\standby\aldump'
*.db_recovery_file_dest_size=2147483648
*.DB_UNIQUE_NAME='orakill'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=oracleXDB)'
*.FAL_CLIENT='orakill'
*.FAL_SERVER='oracle'
*.job_queue_processes=10
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(oracle,orakill)'
*.LOG_ARCHIVE_DEST_1='LOCATION=F:\standby\aldump\ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orakill'
*.LOG_ARCHIVE_DEST_2='SERVICE=oracle LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=oracle'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.LOG_FILE_NAME_CONVERT='E:\oracle\product\10.2.0\oradata\oracle','F:\orakill\'
*.open_cursors=300
*.pga_aggregate_target=202375168
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=609222656
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='E:\oracle\product\10.2.0/admin/orakill/udump'
please help me.
Regards,
Poorna.

you seems to have issues with your setting. For instance see the controlfile parameter.
*.control_files='F:\orakill/\control01.ctl','F:\orakill/\control02.ctl','F:\oradata/orakill/\control03.ctl'
also check whatever directory given actually exist in the server.
hth,
http://borndba.com

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Getting error while creating table from one database to other.

Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatia

hi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1

Getting error while creating trigger!!

Hi Guys,
I am getting the following error while creating trigger in Oracle10g Database in TOAD environment.
Error: PLS-00306: wrong number or types of arguments in call to '='
Table details:
One of the column having BLOB Data type in the table.
In the trigger, I have compared :old and :new values.
CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_NEW(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
Any one knows about this issue, please let me know with the proper solution.
Thanks for your immediate response!
Regards,
Lakshman

CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_AUD(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
I am getting the error in line at If condition
Error: PLS-00306: Wrong number or tpyes of arguments in call '='
Please let me know if any one knows exact solution!
Thanks in advance!
Regards,
Lakshman

OBIEE error: Getting error in creating cross database joins

Hi,
We are trying to create a cross database join in OBIEE.
CHild table is on SQL server and we are using ODBC 3.5 call interface to connect.
Parent table is in Oracle
11.2.0.3.0
Each table can be queried separately. Main task required was to fetch records from Oracle based on records returned by SQl server (Query based on other saved request).
The count of inner query got increased to 30,000 due to which we got too many records in IN predicate error.
Now while creating cross database join between Oracle and SQL server we are getting following error:
[nQSError: 10058] A general error has occured. ODBC state: 37 000
code: 102 message: [microsoft][ODBC SQL Server driver][SQL Server] Incorredt Syntax near 'Session'
[nQSError: 16015] SQL statement execution failed.

Hi,
Could you give a bit more of context for this case? The table in SQL server; Is it a dimension and the one in Oracle DB is a fact? I am guessing, you have set up the driving table here. Have you given a try taking it off, and let BI Server do the filter in memory?
-Dhar

Getting Error while creating Project through API:PA_PROJECT_PUB.CREATE_PROJ

Hi Gurus,
I'm getting an error while creating a New project.
My code looks like this:
APPS.PA_PROJECT_PUB.CREATE_PROJECT
(p_api_version_number => l_object_version_number --IN Parameter
,p_commit => l_commit --IN Parameter
,p_init_msg_list => l_init_msg_list --IN Parameter
,p_msg_count => l_msg_count --OUT Parameter
,p_msg_data => l_msg_data --OUT Parameter
,p_return_status => l_return_status --OUT Parameter
,p_workflow_started => l_workflow_started --OUT Parameter
,p_pm_product_code => g_pm_product_code --IN Parameter
,p_op_validate_flag => l_op_validate_flag --IN Parameter
,p_project_in => g_project_in --IN Parameter
,p_project_out => g_project_out --OUT Parameter
,p_tasks_in => g_task_in --IN Parameter
,p_tasks_out => g_task_out --OUT Parameter
The out put params are: p_msg_count => 1
p_return_status => E
p_workflow_started => N
g_project_out.pa_project_id => 170000000000000000000
g_project_out.pa_project_number => ^
g_task_out_rec.pa_task_id => 170000000000000000000
End process record p_proj_insert => 1
Resetting the task count variable
when I checked the API code I found this:
PA_INTERFACE_UTILS_PUB.G_PROJECt_ID := null; --bug 2471668 ( not in the project context )
PA_PM_FUNCTION_SECURITY_PUB.check_function_security
(p_api_version_number => p_api_version_number,
p_responsibility_id => l_resp_id,
p_function_name => 'PA_PM_CREATE_PROJECT',
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_function_allowed => l_function_allowed
. I think I am getting the error because of this.
Now, question.
Do I need to run the Create Project from a specific Responsibility?
because when I ran the underlined query, I fpound the final status as 'N'.
I'm a HR guy and PA is a new world for me. Any help will be appreciated.
Thanks!!
Viky

You need to find any responsibility and userid that lets you create a project using the screen.
And then in your code, you need to set your context to that resp/userid.
Hope this helps
Sandeep Gandhi

Getting error while creating Communication capability

Hi,
I am getting this error while creating communication capability of Host. I have successfully configured the TP communication capability. Even I have tried many times after changing the names given by me during configuration.
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: uri is unique for object Endpoint: Error -: AIP-11052: Writing following objects: Endpoint failed due to following constraint violation: ENDPOINT_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Endpoint_UK. Unique constraint violation ORA-06512: at "B2B.TRG_ENDPOINT_INS", line 17 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_ENDPOINT_INS'
Please tell me what is the source of error.
Thanks in advance.
Regards,
Anuj Dwivedi

Hi I am getting this error while creating communication capability --
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: trading Partner is unique for object Certificate: Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Certificate_UK. Unique constraint violation ORA-06512: at "B2B.TRG_CERTIFICATE_INS", line 20 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_CERTIFICATE_INS'
Please tell that where could be the problem?
Thanks.
Regards.
Anuj Dwivedi

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Getting error while creating standby database

Similar Messages

Maybe you are looking for