Getting error while creating subsite using custom template in sharepoint2013
Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.
You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Similar Messages
-
Error while creating subsite from site template
Hi,
I am getting below error while creating subsite from existing site template .
Sachin BhosaleThere must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers, -
ORA-01152 error while creating db from custom template
I have a database based on the "general purpose/transaction processing" db, but with a custom tablespace/data added. I have attempted to clone this database by using dbca to create a custom template (including data) from this database. The template creation appears to be successful -- however, when I use dbca to try to create a new db from this custom template, I get the following error when dbca attempts to initialize the instance:
ORA-01152: file 5 was not restored from a sufficiently old backup
ORA-01110: data file 5: <path to my custom tablespace .dbf>
If I select "ignore" at this point, I get further errors, the next error is
ORA-06550: line 1, column 7: PLS-00201: Identifier 'DBMS_SERVICE.DELETE_SERVICE' must be declared
I'm using 11gR2, and am relatively inexperienced on the dba side, any help appreciated.
Thanks,
BenUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
Error while Creating user using Custome form
Hi,
I created a custom form same as create user form
updated in xlDefaultAdmin.properties,xlWebAdmin_en_US.properties,struts-config.xml
on this custom every thing is working fine but when on submit(Create User) it gives me below error
in Admin Console : You do not have permissions to perform this operation.
in App server log: maoRejections:You do not have permission to insert this object.My response is based on the following assumptions:
Your custom form is similar to that of CreateUser form in all manners. The logic at the back-end has been written by you as well. As soon as you get all the values you call the createUser API of OIM to create the user. You have wriiten your custom action classes as well.
The insert error may be due to the reason that the user which you are using to create the user doesn't have sufficient permissions. In other words, if this is done through Java code then while instaniating the API, the user used must be missing these permissions.
If the error is due to this permission for users then we can give these additional permissions to individual users, if in case its not and you have some other scenario then just give me more details, probably I can help you for it.
Thanks
Sunny -
Error while creating Contractors using Request Template
Hi,
Logged in as "xelsysadm". I have created "Contractor Request Template".
Logged in as "ContractorAdministrator" for him "ContractorRole"(Request Administrators) and "Contractor Authorization Policy"(create user) assigned.
When Contractor Administrator tries to create a contractor using "Contractor Request Template" getting the below errors...
oracle.iam.request.exception.AccessDeniedException: IAM-2050059:User OIMINTERNAL does not have access to create the request using Contractor Create User request template.
at oracle.iam.request.repository.RequestTemplateManager.checkRoleAuthorization(RequestTemplateManager.java:165)
at oracle.iam.request.repository.RequestTemplateManager.getTemplateForRequestCreation(RequestTemplateManager.java:218)
oracle.iam.request.exception.InvalidRequestDataException: IAM-2040049:UserManager Access Denied.:
at oracle.iam.requestactions.plugins.datavalidator.CreateUserDataValidator.validate(CreateUserDataValidator.java:651)
at oracle.iam.request.impl.RequestEngine.validateRequest(RequestEngine.java:1695)
Please help me..
Thanks,
MadhaviIf you are not using Template level approval you must associate approval policy( for Request level and operational level). I suggest, you change it to Template level .
To verify this follow below link
http://docs.oracle.com/cd/E14571_01/doc.1111/e14309/request.htm#OMDEV2873
create request template
http://docs.oracle.com/cd/E14571_01/doc.1111/e14316/req.htm -
Getting Error while Creating Sitemap using SitemapGenerator 2.1.1
Hi,
I have configured the sitemap generation for CRS Data by referring Endeca Sitemap Generator Developer's Guide Version 2.1.1.So, I am facing following issue mentioned below,
[INFO: No navigation links (defined in the NAVIGATION_PAGE_SPEC_LIST parameter in the conf.xml file) were created. Please make sure in in Developer Studio that each of the dimensions specified in this parameter have been set to be displayed within the record list.*Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain execute
INFO: Writing search term links...
Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain writeLinks
SEVERE: Error in Writing search term Links: null
Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain execute
INFO: Writing static page links...
Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain writeLinks
SEVERE: Error in Writing static page Links: null
Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain execute
INFO: Writing index file...
Dec 11, 2012 7:40:21 PM com.endeca.soleng.sitemap.SitemapMain writeIndexFile
SEVERE: Error in Writing Index File: null
Script completed successfully.
Even i referred No Navigation Pages Created in Common errors(page no 32) in the Endeca Sitemap Generator Developer's Guide Version 2.1.1 but still didn't get the proper solution
Plz let me know ur inputs/sugesstions.
Thanks in advance,
Chetan KumarThe other errors ("SEVERE: Error in Writing ... links: null") imply a misconfigured Sitemap Generator. I'm sorry that there's not a better error message and diagnosis, but it seems that the Sitemap Generator swallows the real error and only attempts to print out the exception message (which in your case is 'null' -- not very helpful). Looking at the application, you could get an error here under the following circumstances:
1) The Sitemap Generator cannot write to the intended output files
- Make sure that the directory implied by the <INDEX_FILE> configuration setting exists and is writable by the user executing the Sitemap Generator.
- If no directory is written in that setting (e.g. <INDEX_FILE> only contains a file name), then the Sitemap Generator will attempt to create the sitemap in the current directory.
- If that file already exists, then make sure that file is readable and writable by the current user.
2) The Sitemap Generator cannot create proper links for those files.
- Check to make sure you have valid entries in the corresponding files (<SEARCH_TERMS_FILE>, <STATIC_PAGES_FILE>, etc.).
- Check to make sure you have valid template files (<TEMPLATE_FILE>, <URL_FORMAT_FILE>, etc.).
As a general though, you may want to just take the initial Sitemap Generator configuration (unmodified, as is) and run the Sitemap Generator against this configuration. You can then start to tailor the configuration files for your application. (NOTE: you'll need all of the files in the conf directory.) -
Getting Error while creating Genric Datasource
Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB -
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Getting error while creating the Shopping cart.
Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
DevTry the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears. -
Getting error while creating users in Peoplesoft
Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan -
Hi Gurus,
I'm getting an error while creating a New project.
My code looks like this:
APPS.PA_PROJECT_PUB.CREATE_PROJECT
(p_api_version_number => l_object_version_number --IN Parameter
,p_commit => l_commit --IN Parameter
,p_init_msg_list => l_init_msg_list --IN Parameter
,p_msg_count => l_msg_count --OUT Parameter
,p_msg_data => l_msg_data --OUT Parameter
,p_return_status => l_return_status --OUT Parameter
,p_workflow_started => l_workflow_started --OUT Parameter
,p_pm_product_code => g_pm_product_code --IN Parameter
,p_op_validate_flag => l_op_validate_flag --IN Parameter
,p_project_in => g_project_in --IN Parameter
,p_project_out => g_project_out --OUT Parameter
,p_tasks_in => g_task_in --IN Parameter
,p_tasks_out => g_task_out --OUT Parameter
The out put params are: p_msg_count => 1
p_return_status => E
p_workflow_started => N
g_project_out.pa_project_id => 170000000000000000000
g_project_out.pa_project_number => ^
g_task_out_rec.pa_task_id => 170000000000000000000
End process record p_proj_insert => 1
Resetting the task count variable
when I checked the API code I found this:
PA_INTERFACE_UTILS_PUB.G_PROJECt_ID := null; --bug 2471668 ( not in the project context )
PA_PM_FUNCTION_SECURITY_PUB.check_function_security
(p_api_version_number => p_api_version_number,
p_responsibility_id => l_resp_id,
p_function_name => 'PA_PM_CREATE_PROJECT',
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_function_allowed => l_function_allowed
. I think I am getting the error because of this.
Now, question.
Do I need to run the Create Project from a specific Responsibility?
because when I ran the underlined query, I fpound the final status as 'N'.
I'm a HR guy and PA is a new world for me. Any help will be appreciated.
Thanks!!
VikyYou need to find any responsibility and userid that lets you create a project using the screen.
And then in your code, you need to set your context to that resp/userid.
Hope this helps
Sandeep Gandhi -
Getting error while creating condition type in SPRO
Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkatHi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn -
Hi All,
I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
Error:
API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
Additional information:Program error: Please inform your support representative that:
FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
ORA-01403: no data found
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I have intialised the context as below while running the stand alone procedure in SQL Developer.
Fnd_Global.apps_initialize (user_id => 1368347,
resp_id => 21739
resp_appl_id => 514 );
We are on 11.5.10.2 and database version is 9i.
Can you please help??
TIA,
SHi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA -
Getting error while creating table from one database to other.
Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatiahi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1
Maybe you are looking for
-
Battery life shortened & other problems with 3.1.1
I have a 1st gen iPod Touch and my battery life went from about 12-15 hours (I could use it 2 days in a row at work) to 6 hours or less as soon as I installed the latest software update. I also haven't seen the wifi bars once, even though I haven't h
-
10.5.3 Seems to have solved Photoshop CS3/Spaces problem
I've just backed up and installed the 10.5.3 update. The only remaining problem with PS CS3 and Leopard was using Spaces and finding out that the Palettes, Tool Bar and Options Bar would frequently not redraw, depending on how you used Spaces. Twenty
-
Flex 4 preloading modules and moduleFactory question?
Hi, I've run some tests and taking into consideration this info about preloading modules: http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf64277-7ffd.html#WS2d b454920e96a9e51e63e3d11c0bf64277-7feb Here are 2 scenarios: 1) If you
-
Purchase Requisition Disable Account Assignment
Dear Experts, I would like to disable the Account Assignment Item Detail Tab on the Purchase Requisition. I know that it is linked to the Plant and in turn is linked to the Company Code. May I ask how can I do the configuration to disable the Accou
-
I bought a nexus cant get it to charge? it has 4 sm sencers on side does it hav a docking station to help charge it?