Getting error while creating the user in user administration in portal
Hi folks,
i am unable to create the user in user administration in portal due to the following error,
could you please help regarding this issue
"Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
Hi All,
I am closing this thread as this is not in the correct forum. This should be opened in LDAP or UME. Please open the thread under the correct heading.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***
Similar Messages
-
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
Getting error while creating the Shopping cart.
Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
DevTry the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears. -
Getting Error While creating the iViews in EP.
Dear Experts,
I am getting the below error while creating the new iViews in the EP.
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/pb.
Exception id: [00142A4FD4AA006400000B0F00005BA80004CAFF2F033C5E]
Please help me to resolve this error.
Thanks & Regards,
Sachin SableHi ,
Check the possible causes of error
http://help.sap.com/saphelp_nw70/helpdata/en/f4/1a1041a0f6f16fe10000000a1550b0/content.htm
and check the logs related to that exceptionid.
Koti Reddy -
Getting Error while creating the proxy generator in Dot Net Connector 2003
Hi,
While creating the proxy generator in Dot Net Connector 2003 i am getting following error: I am successfully able to login into the SAP system and able to select the SAP tables but during the final step of proxy generator wizard i am getting following error:
<b>----
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
Object reference not set to an instance of an object.
OK
</b>
I have already installed the Java JVM on my machine its version is as follows:
<b>java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)</b>
Regards,
Ravi ShahHi Amit,
I doing good!!!! Thanks for the response.
I uninstalled the earlier version of JVM and installed the latest version of JVM i.e. jre-1_5_0_09-windows-i586-p.
I got the proper entries under registry mentioned below:
<b>Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"UseJava2IExplorer"=dword:00000001
"HideSystemTrayIcon"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
"CurrentVersion"="1.5"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
"MicroVersion"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"MicroVersion"="0"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy]
"Country"="IN"
"PostStatusUrl"="https://sjremetrics.java.com/b/ss//6"
"EnableJavaUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start]
"CurrentVersion"="1.5.0_09"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_02]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_03]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_04]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_05]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_01]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_02]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.5.0_09]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"</b>
After installation I opened the Dot Net connector proxy client wizard . I followed the series of step during Dot Net connector configuration:
1. selected the SAP connector.
2. The next screen 'Enter Logon Information' comes where i entered the following information System as 'custom', host='IP address', Id='00' but by default it turns to '0' , client='800', user='user id' and password ='password'.
3. After clicking on Next button i am successfully logon into the SAP system.
4. The next screen in the wizard is 'selectall the remote function modules that you want to be part of your proxy object'. After selecting the SAP tables and clicked on Next button I am getting following error
<b>
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
INFO: using logging implementation "AII Logging"
Exception in thread "main" com.sap.aii.upload.api.LoginException$WrongPassword: Invalid user/password combination
at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:94)
at com.sap.aii.upload.sap.SAPConnection.<init>(SAPConnection.java:38)
at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
OK
</b>
Thanks and Regards,
Ravi Shah -
Getting Error while Creating the RFC Model
Hi All,
I am Creating the aRFC model. Now i am getting error in the creation of RFC.
In Single Server in am giving my R/3 Server IP. my usrname and password.
what i have to write in the Load Balancing. I am not getting any options in Load Balancing Tab.
When i press Next, Error is coming:
Connect to SAP Gateway Failed.
Error: Partner Not Reached.
So pls help out......
Regards,
Dhruv ShahHi Dhrruv,
You can check your SAP R/3 username and password with the BASIS person or Security person.
Once it is confirmed, give the following details:
Host Name : abcdefg.hij.xyz (ie.give the alias of the server )
System Number : 00
Client : (give ur client system number)
Logon Name : (ur SAP logon Name)
Password: (ur SAP Password)
Language : EN
Leave SAP Router blank.
Click next. It should work. Try this and let me know what happens.
If you get error please send me the screen shot of the details u filled in to [email protected]
Thanks
Kukku -
Getting Error While Creating the Rule Repository File in SOA OrderBooking
Hi,
I am creating a SOA OrderBooking Demo Application by following the OrderBooking Tutorial. In Chapter 8.10 Set up Oracle Business Rules when i open the "http://host:port/ruleauthor" link here In the Repository tab:
■ Repository Type: select File.
■ File Location: enter
SOADEMO\SOAOrderBooking\bpel\rules\oracle\sample_
repository. (SOADEMO refers to the directory where you are building the
SOA Order Booking application.) Rule Author will create the sample_repository file.
but in my C:\Downloads\jdevhome\jdev\mywork\SOADEMO\SOAOrderBooking\bpel
I dont have rules\oracle\sample_repository file in it. I created rules and oracle folder there but when i gave the sample_repository path on the ruleauthor page i got the error of "invalid directory path".
I also tried to give the sample_repository path from (here i unzipped the demo application) my
" C:\Documents and Settings\usareen\Desktop\BPEL Tutorials\soademo_101310_prod\SOADEMO\SOAOrderBooking\bpel\rules\oracle\sample_repository"
But it still shows the directory path error.
Please help me out.
thanksHi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel -
Error while creating the DWH tables using DAC
Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RMThe fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy. -
Error while creating the sales order with billing reference
hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja -
Getting error while creating users in Peoplesoft
Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan -
WWC-00000 error while creating the user
Any one can help me on the WWC-00000 error while creating the
user from the Admin tab of Oralce Portal. In fact I can't use
the Login server administration. same problem exists.
I granted DBA privileges to the PORTAL30, just to verify and NO
use.
I am using the latest version of Portal S/W on iAS9i 1.0.2.2.1
- SuneelHi Suresh,
This error trace is not sufficient to understand the issue and at what step you got this error.
First tell me, did you got the User Admin Tab in your portal access. if yes.. did you got the next step...which is Identity Management. Please elaborate when did you got this error (i mean at what step) after that only we can give it a try.
Thanks,
Vinod -
Error while creating the HTTP client with destination GB_DPSRetrieve
Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
KishoreHi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar -
Getting Error while creating Genric Datasource
Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB -
Error while creating the structure
hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is activehi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar
Maybe you are looking for
-
hello, i have an iBook G4 which is old, it has an OS of 10.4.11 which is called tiger i think, forgive me im new to apple, it has a version of itunes installed (9.2) which worked fine with my 1st gen ipod touch but ive upgraded to a 4th gen ipod touc
-
Airport in bridge mode not working in Windows7
Hi everyone, Last night as I was browsing the web on my iPad the internet stopped working...I am using an Airport Express router plugged directly into the wall socket of my apartment which was configured by the ISP. I have been using this config for
-
Hello, We have an ECC 6 system with EHP 4 SPS 5 and we watn to install a new Technical Usage (IS-OIL, IS-PRA and IS-UT) In order to do that I have to supply an xml file created by the MOPZ. I created a new MOPZ transaction, in the phaze "Update Optio
-
Can 'Audio Calendar' run in background on 6300?
Hi everyone - I'm a newbie here so forgive me if I get things wrong. I have a 6300 and I can run 'Audio Calendar' by Maracus Software fine. It has a feature which plays back audio alerts at user assigned date and time. All this works fine when the so
-
Cannot view content text and elements in Dreamweaver
Hi, I am not an expert in Dreamweaver, still learning. Would anyone tell me why when I open up the template in Dreamweaver's design view I cannot see the content text and other elements to edit or view? However, all those are still viewable in browse