Getting Error while doing Control Panel - Windows Update Error code is 80070103

Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
Microsoft - Other hardware - WinUsb Device
Please provide your email ID to send the Error screen shot.

Hi!
Check the following link to see if it solves your problem:
http://support.microsoft.com/kb/952032
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

Similar Messages

  • Error while doing BAM configuration in JDeveloper

    Hi,
    I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
    "Server is not set up correctly SOA1"
    I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
    I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
    Host Name: SOA1(system name)
    Port Number: 80
    User Name: Administrator
    Password: <windows domain pwd>
    Domain Name: DOMAINNAME
    Any help would be highly appreciated.
    Regards,
    Shaily

    hi Shaily
    It looks like suggesting a different forum is not needed, because you already tried that ...
    Error while doing BAM connection in jdeveloper
    Error while doing BAM connection in jdeveloper
    Error while doing BAM connection in jdeveloper
    I hope you get some answers.
    success
    Jan Vervecken

  • Error while doing confirmation with cor6

    Dear PP gurus,
    I am getting following error while doing confirmation. please suggest.
    "Error while importing from memory QAPO SAPLQEEV
    0400000363"
    Thanks in advance
    Kailash T.

    Hi,
    The structure QAPO relates to Inspection operation records & the program - SAPLQEEV relates to Spec. tables for results recording. Hence would suggest to discuss this with your QM personnel.
    Also was able to find a link which had a same issue, but no solution posted, have a look if it helps in anyway
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=173200
    Also refer to OSS note - 334400. If all the above does not resolve the issue, raise an OSS message with SAP.
    Regards,
    Vivek

  • Error while doing Sales contract

    Hello ,
    I am facing an error while doing sales contract . The error is as follows:
    Message no. FI311: No commitment item entered in item 00010
    Kindly provide the solution to solve this issue
    Thanks

    Note 1267998 - FI311 - Common issues related to this error message
    Note 418471 - V1331 (Item & does not exist) / Funds Management
    Regards,
    Ravi

  • Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • Error while doing Challan updation

    Dear all,
       Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
    pls help on this
    will get a good points for solving this

    I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
    Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

  • I am getting error while doing MFBF for semifinisg good

    Hi,
    i am getting error while doing MFBF for semifinisg good
    Existing standard cost estimate cannot be used
    Message no. RM175
    Diagnosis
    This error appears under the following circumstances:
    The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
    The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
    Procedure
    The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
    Use product costing to create the standard cost estimate.

    I had already check REM profile repetitive mfg profile final backflush w. activities.
    this particular material is semifinish material attached in BOM of finish material.
    backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
    i had assign production version , done routing and maintain REM profile,
    created material cost with quantity structure ck11n then run the costing in ck40n.
    still getting the error what else is to done to able to book this thru MFBF.

  • HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

    Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall  iTunes.

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • I tried to install the icloud to my windows 7. pop up said the insaller encountered errors before icloud control panel 3.1 could be configured. it also said my system has NOT been modified ? can anyone help?

    i tried to install icloud to my windows 7 pc. a pop up said the installer encountered errors before icloud control panel 3.1 could be configured. it also said my system has not been modified.Any advise how to modify my system?

    Well.
    I reinstalled Win7 64bit, same issue.
    I installed Win7 32bit, installer doesn't run correctly.
    Got a second new laptop, running Win7 Starter edition, 32bit, installer doesn't run correctly.
    By run correctly I mean when you double click it, you get the busy cursor and some disk IO then nothing happens.
    So....When's the next release of Itunes out?
    Because the current one is a steaming pile of unworking crap.

  • Getting error while doing stream setup through OEM

    hi all,
    I am getting following error while doing stream setup for user stradmin (ORCL) db to stradmin_dest (orcldestination) on same windows m/c.
    java.sql.SQLException: ORA-20204: User does not exist: STRADMIN ORA-06512: at "SYSMAN.MGMT_USER", line 122 ORA-06512: at "SYSMAN.MGMT_JOBS", line 139 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
    I provided everything (host credential, usernames for new users and table capture)
    its urgent
    Help in advance

    hi,
    thanks for reply but DB user exists. It seems to be problem of WIN environment with Streams. I could solve it. But after whole setup and starting Apply and capture capture process goes for hours, not replicated at destination database. Normally how fast is replcation when done for small db like scott on table emp.
    thanks

  • Getting the error while doing PGI for depot delivery

    Hi
    I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
    Regards
    PK

    Moved from SAP ERP SD Sales to Internationalization and Unicode.  Please post all your CIN related queries here.  Also ensure that before posting, you made efforts in searching in SCN or Google.  The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
    G. Lakshmipathi

  • Getting runtime error while doing sales order

    Hi,
    I am getting a runtime error while doing sales order.
    Error : SAPSQL_INVALID_FIELDNAME
    Kindly suggets....stuck up badly.
    cant do any transaction.
    Regards
    Kishan

    Hello,
    Check OSS Note#209847 and 310304
    Regards,
    Gauravjit.
    Reward points if the notes are helpful

  • Update termination error while doing PGR

    Hi,
    I got this error while doing PGR, please do suggest the dolution.
    Update was terminated
    System ID....   DPT
    Client.......   900
    User.....   SDUSER
    Transaction..   VL02N
    Update key...   4BEAA8A2A6DA0609E1000000AC1107A7
    Generated....   12.05.2010, 18:38:55
    Completed....   12.05.2010, 18:38:56
    Error Info...   Update program: I/O error Error; function Update, RC= 4, key
    Thanks,
    Swapnil

    Hi Lakshmipathi,
    I have checked the analysis in SM13, got the folllowing,
    Function Module        SERIALNUMBER_POST
    Status                        Update was terminated
    Report                        LIEP1U01
    Row                            159
    Error details   Class:     IS         Number:    229
    Update program: I/O error Error; function Update, RC= 4, key

  • Getting error while doing pgi

    i am getting an error while doing pgi, the error is 'runtime error - description of exception'
    how could i overcome this problem
    pls help me to solve this problem

    Hi,
    Consult your abaper he can give you a solution.
    Thank you,

Maybe you are looking for

  • Creative Cloud White Screen on Start-up.

    When I open my Adobe CC is brings me to a white screen only and will not allow me to pass it. I have tried to delete the OBEE file, Change the name of it, and completely reinstall CC 3-4 times with no success, im just bummed that I cant update any of

  • Error in DAC ETL Full Load (Supply Chain Inventory Transactions)

    Hi Gurus, My Environment is like this, Syatems: windows 2003 server 32 bit DAC: 10.1.3.4.1 with Patch 10052370 Informatica : Power Center 8.6.1 Hot Fix 11 OBIA: 7.9.6.2 OBIEE: 10.1.3.4.1 I Created a plan with one Subject area Supply Chain Inventory T

  • My 2nd monitor won't turn on when plugged in

    Hi guys, I have a Macbook Pro (June 2012) and i am using the thunderbolt port to have an external monitor (Neovo F-417) I am using an adapter between the monitor (which is VGA) and and the Macbook (thunderbolt port) When the mac is on and i plug in t

  • Flash Builder code color appearances issue (!!)

    Okay, so I just spent about 15 - 20 minutes reformatting the color appearances of my code display (it really helps when programming at least 8 - 10 hours a day with large code files). Everything was about fine after making a bunch of adjustments (got

  • Can I add a SSLv3 exception to use a site?

    need to add an exception for Leaseplan as they send me links in order for me to submit invoices for payment. Each link is unique how can I add an SSLv3 exception for them.