Getting error while Enable Dashboard Widget

Dear Experts,
I am getting error while Enable Dashboard Widget
u201CInstall SAP Business One Integration Service before enabling the dashboard widgetu201D
Even I follow all step by step process.
Thanks
Kamlesh

Hi Kamlesh,
Have you tried the following:
Deactivate the cockpit in your Business One database - Disable My Cockpit and also disable cockpit in General Settings
Run EventSender Setup (in first step try to avoid using localhost or IP addresses)
In third step press Test Connection, in fourth step make sure that your database is checked, press also Receiver but ton and then Test Connecion.
Finish EventSender setup.
Click on SLD in the B1i Framwork and ensure connection to the Company databsae (B1DI and JDBC) is successful.
Go back to B1i Framework UI, click Scenarios in upper menu, then select Control in left menu and (re)activate Xcelsius scenario.
Restart EventSender service, Integration Service and Proxy services via Servies (Computer Management)
Now you can enable cockpit in your Business One database - enable cockpit in General Settings and then enable My Cockpit.
After installation of B1ic, the company is not listed in the SLD
Delete all entries of table SLSP and SLSPP in SBOCOMMON. Restart integration service. In SAP Business refresh the company list.
These solutions are documented in the attached Note 1619422.
Kind regards
Sean

Similar Messages

8.81 B1iC error when enabling Dashboard Widget

Hi,
In the B1 client when enabling the Dashboards (Cockpit -> General Settings -> Enable Dashboard Widget) I get the following error in red at the bottom of the screen (and in the client message log):
Install SAP Business One Integration Service before enabling the dashboard widget Message ID = 1290000001
I have a clean install of 8.81 PL00 and the Integration Component, company database is a new a demo database (SBODemoAU).
The B1iC install created the correct SLD and I have tested the B1DI & JDBC connections and both report successful connections.
There is also a successful message in the Integration Framework message log for trigger object 1210000008 which I believe from the doco and previous versions that this is the Dashboard deployment to the Bizstore.
I have gone through the B1iC Troubleshooting guide as much as possible (it does not yet have the 8.81 updates) but nothing helps.
I understand the B1iServer address is now automatically created in 8.81 but how do I check the correct value and fix this problem.
I have spent a few days on this trying different things, sniffing the network, analyzing SQL calls, so any help would be appreciated.

I too am finding the same issues. Am on 8.81 PL7. (8.81.315). B1DI and JDBC test good. Cockpit at Company level enabled. Enable dashboard widget does not work. I receive "Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again" Both are running and have been for 24 hours.
From an earlier post about port 8443, here is an extract from my C:\Program Files (x86)\SAP\SAP Business One Integration\B1iServer\Tomcat\conf\server.xml
-->
<Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" enableLookups="false" server=" "/>
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->
          
     <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>
Any thoughts on how to resolve?

Getting Error while enabling CDC on the database

Hi Experts,
I am trying to enable CDC on my database but i am getting error message like below, can anyone please suggest on this .
The server principal "XXXX." is not able to access the database "ABC" +under the current security context.
Could not update the metadata that indicates database XYZ is enabled for Change Data Capture. The failure occurred when executing the command 'sp_cdc_create_objects'. The error returned was 3616: 'An error was raised during trigger execution. The batch has
been aborted and the user transaction, if any, has been rolled back.'. Use the action and error to determine the cause of the failure and resubmit the request.
Thanks in Advance.
Niraj Sevalkar

Hi Finally i got my answer, There is an DDL trigger which restricting me to enable CDC .....
And ABC is an auditing database?
Unless your DBA is evil and really don't want you to enable CDC, I think you should talk with and fix the bad trigger. You can refer him to this article for a proper solution:
http://www.sommarskog.se/grantperm.html
Erland Sommarskog, SQL Server MVP, [email protected]
Yes there was an trigger on the XYZ database which was references details in ABC database db so that was restricting me to do this. thank you for your article .... :)
Niraj Sevalkar

Getting error while running SSRS report in SharePoint 2010

Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
Manjunath

Hi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information：
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Getting error while taking MAX DB trans log backup.

Hi,
I am getting error while taking trans log backup of Maxdb database for archived log through data protector as below,
[Critical] From: OB2BAR_SAPDBBAR@ttcmaxdb "MAX" Time: 08/19/10 02:10:41
Unable to back up archive logs: no autolog medium found in media list
But i am able to take complete data and incremental backup through data protector.
I have already enabled the autolog for MAX DB database and it is writing that log file directly to HP-UX file system. Now i want to take backup of this archived log backup through data protector i.e. through trans log backup. So that the archived log which is on the file system after trans log backup completed will delete the archived logs in filesystem. So that i don;t have to manually delete the archived logs from file system.
Thanks,
Subba

Hi Lars,
Thanks for the reply...
Now i am able to take archive log backup but the problem is i can take only one archive file backup. Not multiple arhive log files generated by autolog at filesystem i.e /sapdb/MAX/saparch.
I have enabled autolog and it is putting auto log file at unix directory i.e. /sapdb/MAX/saparch
And then i am using the DataProtector 6.11 with trans log backup to backup the archived files in /sapdb/MAX/saparch. When i start the trans backup session through data protector it uses the archive stage command as "archive_stage BACKDP-Archive LOGBackup NOVERIFY REMOVE" If /sapdb/MAX/saparch has only one archive file it will backup and remove the file successfully. But if /sapdb/MAX/saparch has multiple archive files it gives an error as below,
Preparing backup.
            Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
            Setting environment variable 'BI_REQUEST' to value 'OLD'.
            Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
            Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
bsi_in -c'.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
            Writing '/sapdb/data/wrk/MAX/dbm.ebf' to the input file.
            Writing '/sapdb/data/wrk/MAX/dbm.knl' to the input file.
        Prepare passed successfully.
        Starting Backint for MaxDB.
            Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
bsi_in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
            Process was started successfully.
        Backint for MaxDB has been started successfully.
        Waiting for the end of Backint for MaxDB.
            2010-09-06 03:15:21 The backup tool is running.
            2010-09-06 03:15:24 The backup tool process has finished work with return code 0.
        Ended the waiting.
        Checking output of Backint for MaxDB.
        Have found all BID's as expected.
    Have saved the Backup History files successfully.
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.ebf
            #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.knl
End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
        Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
        Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
        Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
        Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
    Have finished clean up successfully.
The backup of stage file '/export/sapdb/arch/MAX_LOG.040' was successful.
2010-09-06 03:15:24
Backing up stage file '/export/sapdb/arch/MAX_LOG.041'.
    Creating pipes for data transfer.
        Creating pipe '/var/opt/omni/tmp/MAX.BACKDP-Archive.1' ... Done.
    All data transfer pipes have been created.
    Preparing backup tool.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'OLD'.
        Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
        Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
in -c'.
        Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
        Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
        Writing '/var/opt/omni/tmp/MAX.BACKDP-Archive.1 #PIPE' to the input file.
    Prepare passed successfully.
    Constructed pipe2file call 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait'.
    Starting pipe2file for stage file '/export/sapdb/arch/MAX_LOG.041'.
        Starting pipe2file process 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait >>/var/tmp/tem
p1283767880-0 2>>/var/tmp/temp1283767880-1'.
        Process was started successfully.
    Pipe2file has been started successfully.
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    Waiting for end of the backup operation.
        2010-09-06 03:15:25 The backup tool process has finished work with return code 2.
        2010-09-06 03:15:25 The backup tool is not running.
        2010-09-06 03:15:25 Pipe2file is running.
        2010-09-06 03:15:25 Pipe2file is running.
        2010-09-06 03:15:30 Pipe2file is running.
        2010-09-06 03:15:40 Pipe2file is running.
        2010-09-06 03:15:55 Pipe2file is running.
        2010-09-06 03:16:15 Pipe2file is running.
        Killing not reacting pipe2file process.
        Pipe2file killed successfully.
        2010-09-06 03:16:26 The pipe2file process has finished work with return code -1.
    The backup operation has ended.
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
    Reply buffer filled.
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
        Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
        Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
        Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
        Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
        Copying pipe2file output to this file.
Begin of pipe2file output (/var/tmp/temp1283767880-0)----
End of pipe2file output (/var/tmp/temp1283767880-0)----
        Removed pipe2file output '/var/tmp/temp1283767880-0'.
        Copying pipe2file error output to this file.
Begin of pipe2file error output (/var/tmp/temp1283767880-1)----
End of pipe2file error output (/var/tmp/temp1283767880-1)----
        Removed pipe2file error output '/var/tmp/temp1283767880-1'.
    Have finished clean up successfully.
The backup of stage file '/export/sapdb/arch/MAX_LOG.041' was unsuccessful.
2010-09-06 03:16:26
Cleaning up.
    Have encountered error -24919:
        Can not remove file '/var/tmp/temp1283767880-0'.
        (System error 2; No such file or directory)
    Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-0' ).
    Have encountered error -24919:
        Can not remove file '/var/tmp/temp1283767880-1'.
        (System error 2; No such file or directory)
    Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-1' ).
Have finished clean up successfully.
Thanks,
Subba

Getting error while starting managed recovery

Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION

Hi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks

Error while enabling two way authentication :Client certificate missing

Hi,I am getting the following error while enabling the two way authentication.The weblogic server 5.1 has accepted both the client ca and server certificates and is listening for SSL on the specified port.But when I try to access thru the secured connection thru my IE it asks for Client Authentication dialog asking for valid Client certificate but I am not able to view any of the client certificate even though I have one which is the trusted root store.and there by giving the error page cannot be displayed .On the server side I get the following error.Thu Mar 08 10:54:35 GMT 05:30 2001:<D> <SSLListenThread> Problem accepting connectionjava.io.IOException: required client certificate missing at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:711) at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529) at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219) at weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192) at weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001) at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30) at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377) at weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:506) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)can anybody please guide me what could be wrong.Do I need to change the browser settings.I have enabled SSL 3.0 and SSL 2.0 and all other settings are defaultIt is urgent.pls give some suggestions.Regards,Bhavani

I think you have to specify the client root in your weblogic.properties
file.
here are my settings:
weblogic.security.enforceClientCert=true
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
weblogic.security.clientRootCA=VeriSignClass1CA.der
Regards,
-Arthur
Bhavani <[email protected]> wrote:
Hi,I am getting the following error while enabling the
two way authentication for Weblogic Server 5.1Thu Mar
08 16:10:54 GMT 05:30 2001:<I> <ListenThread> Listening
on port: 7001Thu Mar 08 16:10:54 GMT 05:30 2001:<I> <SSLListenThread>
Listening on port: 7002<NT Performance Pack> NATIVE:
created IoCompletionPort successfully. IoPort=0x000002a4Thu
Mar 08 16:10:56 GMT 05:30 2001:<I> <WebLogicServer> WebLogic
Server startedThu Mar 08 16:11:20 GMT 05:30 2001:<D>
<SSLListenThread> Problem accepting connectionjava.io.IOException:
required client certificate missing at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:711)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:506)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
Compiled Code)Thu Mar 08 16:12:07 GMT 05:30 2001:<D>
<SSLListenThread> Problem accepting connectionCan anybody
suggest why this error is coming?Regards,Bhavani

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting error while installing MSSQL 2005 SP2 Windows Server 2008 Service Pack 1

Hi,
We are getting error while we are installing MSSQL 2005 SP2.
It gives me the following error
No Qualifying Product
===================
This machine does not have a product that matches this installation package.
I am pretty new to MSQL. Any help to solve this is much more appreciated.

Hello,
It seems you downloaded Service Pack 2 for SQL Server 2005 alone, that download does not install a SQL Server 2005 instance.
You might have to download and install SQL Server 2005 and then proceed to apply service packs related to that version of SQL Server.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Getting error while running Foreign currency valuation

Hi,
Thanks in advance
User getting error while running Foreign Currncy valutaion i.e. Internal error with background job sheduling sapf100.
Do not have good exposure in Foreign Currecy valutaion please help me out..
Edited by: kudalamallikarjuna on Oct 12, 2011 4:00 PM

Dear,
Once you get the error, please go to SM37, put user ID and appropriate dates and Execute
System will show all jobs submitted by the user id, check if there is any job which is cancelled, select the line and click on Job log,
In job log please let us know what is shown there..
Br,Vivek

Getting error while running Perl adcfgclone.pl appsTier

hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me out

hi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard

Getting error while Enable Dashboard Widget

Similar Messages

Maybe you are looking for