Getting error while formating hdd

Hi all. am getting error:
"Disk erase failed with error:
POSIX reports: The operation couldn't be completed. Input/Output error"
while formating internal hdd with utility disk, i've tried use terminal as well to erase disk but no success
does any1 know how to solve that problem ? :> thanks

I/O error means it can't read or write to the drive.
I highly suspect it's a mechanical failure if Terminal doesn't work.
You selected the name of the hardware maker in Disk Utility right? Format HFS+ Journaled?
All I can say is try a Zero Erase reboot the comptuer after cleaning the disk and see if that works or try another boot disk.
Run the hardware test. try these hardware fixes, likely the drive will need to be replaced first, then if it occurs again it's the logicboard or power supply.
Reset SMC
http://support.apple.com/kb/ht3964
PRAM/NVRAM
http://support.apple.com/kb/HT1379
Hardware Test
http://support.apple.com/kb/HT1509
You can install OS X on to a blank external drive and hold option to boot from it and get by like that until you can get the internal drive replaced.
You can also burn a ISO of PartedMagic and option/c boot off of that and perform some miracles if it's a stubborn locked drive.

Similar Messages

Getting error while running Perl adcfgclone.pl appsTier

hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me out

hi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard

Getting error while loading Flat File

Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
path

Hi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting error while installing MSSQL 2005 SP2 Windows Server 2008 Service Pack 1

Hi,
We are getting error while we are installing MSSQL 2005 SP2.
It gives me the following error
No Qualifying Product
===================
This machine does not have a product that matches this installation package.
I am pretty new to MSQL. Any help to solve this is much more appreciated.

Hello,
It seems you downloaded Service Pack 2 for SQL Server 2005 alone, that download does not install a SQL Server 2005 instance.
You might have to download and install SQL Server 2005 and then proceed to apply service packs related to that version of SQL Server.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Getting error while running Foreign currency valuation

Hi,
Thanks in advance
User getting error while running Foreign Currncy valutaion i.e. Internal error with background job sheduling sapf100.
Do not have good exposure in Foreign Currecy valutaion please help me out..
Edited by: kudalamallikarjuna on Oct 12, 2011 4:00 PM

Dear,
Once you get the error, please go to SM37, put user ID and appropriate dates and Execute
System will show all jobs submitted by the user id, check if there is any job which is cancelled, select the line and click on Job log,
In job log please let us know what is shown there..
Br,Vivek

Getting error while running SSRS report in SharePoint 2010

Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
Manjunath

Hi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information：
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Getting error while running OIM in built purging script OIM_ReconArch.sh

Getting error while running OIM in built purging script OIM_ReconArch.sh
bash-3.00$ cat Err_Arch_Recon_2012_11_01_15_36_06.log
-- Reconciliation Archival Execution Status
BEGIN OIM_SP_ReconArchival('N','N',200000,'ARCHIVE_SELECT_WITH_CONS_DROP_REC','Both Events','20110101','20111231'); END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
ORA-00942: table or view does not exist
ORA-01031: insufficient privileges
ORA-06512: at line 1
Please Help

ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
ORA-00942: table or view does not exist
ORA-01031: insufficient privileges
(1) Check whether the OIM_SP_RECONARCHIVAL table or view exists or not...
(2) If it exists, check whether the DEV_OIM user has enough privilege to view this table or not...
If not, give it all privilege by login as sys as sysdba
GRANT ALL PRIVILEGES TO DEV_OIM;
COMMIT;

Working with WebLogic81sp2 and getting error while processing a file.

Hi,
getting error while working with the weblogic81sp2 and java based application. In this m processing a file. the file gets processed but doing command 'ps -ef' shows process still running. The exception log is like:
<26-Mar-2008 10:10:48 o'clock GMT> <Warning> <WebLogicServer> <BEA-000337> <ExecuteThread: '21' for queue: 'weblogic.kernel.Default' has been busy for "645" seconds working on the request "Http Request: /shield/xml", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
<01-Apr-2008 06:50:00 o'clock BST> <Error> <HTTP> <BEA-101017> <[ServletContext(id=197633402,name=/shield,context-path=/shield)] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/jsp/layouts/mainLayout.jsp' : Broken pipe
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.processException(Ljava.lang.Throwable;Ljava.lang.String;)V(InsertTag.java:956)
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()I(InsertTag.java:884)
at org.apache.struts.taglib.tiles.InsertTag.doEndTag()I(InsertTag.java:473)
at jsp_servlet._jsp.__main._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(main.jsp:2)
at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:305)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:301)
at org.apache.struts.action.RequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:1069)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(TilesRequestProcessor.java:274)
at org.apache.struts.action.RequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(RequestProcessor.java:455)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(TilesRequestProcessor.java:320)
at org.apache.struts.action.RequestProcessor.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:507)
Please help me!

Not sure why you want to replace. Since the response of the proxy would remain to hold the request body by default.
If you have stored the opaque element in a variable ($var_opaque), then you can do the following.
XPath : .
In variable : body
Expression : $var_opaque
Check - "Replace node content"

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Getting error while Startting a BPM process programmatically

Hi Experts,
I am getting an error while trying to start the BPM process programmatically. What i have done till now is
1. Created a WS in process composer
2. Binded this ws with start of the process
3. Created input parameters
4. Testing it in WS Navigator
I am following this doc /people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
and I am getting error while testing in WS Navigator. I am getting error at the last step i.e. in result step and the error is
Web Service returned an error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Client" Fault String: "No operation found using soap keys [], [cn_comments]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: (BindingType=Soap, SEIName=NewWSDLFile, BindingQName=(http://www.example.org/NewWSDLFile/)NewWSDLFileSOAP, PortTypeQName=(http://www.example.org/NewWSDLFile/)NewWSDLFile, SoapVersion=SOAP11, Galaxy_SDO=true, InterfaceMappingID=45ffb27c:1237f972cd8:-7d7e)."
If possible can any one help me out.
Thanks and regards
Pranav

Hi Arafat,
Thanks for replying. Yes i have completed the output mapping. Input parameters i need for this service are :
1. cn_comments
ca_comments
2. cn_planningGroup
ca_account
ca_serialnumber
and few more attributes
Now, what i did was i have created a complex type and added elements in it. But to my surprise i was not able to get these nodes and elements in output mapping. So, i changed the type of "parameter" from "new operation" to my complex type. By doing this i was able to get my nodes and elements in output mapping. Now i tested the entire thing in WS Navigator and i got that error.
Please suggest how o proceed.
Regards
Pranav

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Getting error while formating hdd

Similar Messages

Maybe you are looking for