Getting error while posting actual expense to f-02
HI Every one
Getting error while posting actual expense to f-02.Iam trying to post simple expense transation against a WBS element but iam getting the following error "FI: Postings" is not allowed for WBS element".Even i checked the status profile.In user status the FI postings business transaction is allowed but in System status it is not allowed but as far my understanding in either of one status the business transaction should be allowed.
Please suggest me hw to change the system statuses and hw to resolve the error.
Regards,
Ragahvendra.M
SAP-Practice
Dear,
I think ur project is not in released status.
Or the account assignment element is not ticked.
Check and try.
Regards.
Similar Messages
-
Getting error while posting reports on Unix Process Scheduler Server
Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas. -
Getting Error while posting billing into accounting.
Hi All,
Could any one help on this error,i am getting this while posting billing into accounting.
Tax statement item missing for tax code O0
Message no. FF805
Diagnosis
No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.Hi Raja,
We have many FF805 errors reported by customers and the same solution
has resolved the problem. Please note that the SD-FI interface changed
from earlier releases.
In the vast majority of cases, error FF805 occurs because of an error
in your pricing procedure. The previously attached note 112609 explains
in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax
codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain
tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base
value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no
tax line with tax indicator XX, then the error FF805 issues, and
it is justified. => Please check these informations. I have attached
notes for further information.
-> EXAMPLE
If tax condition MWST has base amount zero and value zero; for this
reason it is not passed to accounting. But, according to the
criteria reported by note 112609, its tax indicator EG: A7
has been assigned to the condition EG: ZBR1.
So in accounting there would be a revenue line with tax indicator A7,
but there isn't any tax line with indicator A7 (because MWST doesn't
pass to FI). The note 400766 states situation is unallowed, and error
FF805 is justified.
Thanks and best regards,
Smile -
Getting Error while posting through KB11N : No true sender object entered
HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose. -
Getting error while posting GR using IBD from BAPI_GOODSMVT_CREATE
Hi Experts,
While posting GR from IBD using BAPI_GOODSMVT_CREATE with all necessary values like plant,material,mvttype and serial numbers etc...
getting error from BAPI return "1 E VLA 315 Item 000010 requires serial numbers; use the inbound delivery dialog".
I have tried with same IBD number from Tx: VL32N able to post Goods receipt successfully with above data,but whereas tried to post same IBD with Tx:MIGO getting same bapi error as above mentioned.
I have tried with solutions some of the blogs from SCN but no luck
is it necessary to implement this note in my system?
Error message VLA315 during GR for inbound deliv. using MIGO
Can you please give me suggestions what i have missed in my code/Configurations.
Thanks,
Syamis it necessary to implement this note in my system?
Error message VLA315 during GR for inbound deliv. using MIGO
Yes. Installing notes using Tx SNOTE is very easy. If you find a note that is relevant for your system, just install it. -
Getting error while posting the invoice "Different Local currency "
Hello All,
User created Non MRP PO with CNY currency for China and cost center entered which belongs to US country.
User posted invoice for this PO and then he understood that cost center which has been entered in the PO was wrong.
and he tried to cancel the invoice with Tcode MR8M and with MIRO credit Memo as well.
But getting error "Different Local currency from CNY to USD"
How this can be solved,pls suggest.
Thanks...
Truptihi
please check that you might have changed the currency of PO
please reset it and then reverse the MIRO
Note 592312 - MIRO: Termination M8396 'Different local currency'
Edited by: Kunal Ingale on Nov 12, 2010 8:15 AM -
FIPP object, getting error while posting document in background step
Hi Experts,
Once approval is done we are posting document in background, but getting following error
No batch input data for screen SAPMF05A 0607
We have delegeted object FIPP to ZFIPP and added method zpost with same code as post with some initial validations.
Your help in solving this error would be really appreciated.If you really haven't done any relevant changes to the SAP standard post method, I would look for an answer from OSS. And if not found, then ask from SAP. But if you have replaced the standard post method code with for example some BDC code, then you need to check this with your ABAP guys... I don't think that it has anything to do with workflow.
Regards,
Karri -
Getting error while posting vendor invoice
Hi, I was trying to post a vendor invoice and am getting an error "Balancing field "Profit Center" in line item 001 not filled"
I have changed the field status of the posting key and the reconciliation account but am still getting the same message.
Can anyone please help?Hi,
check the below links
balancing field "profit center" in line item 001 not filled"
Balancing field "profit center" in line item 001 not filled
This is a frequently asked question. Please search in the forums before you post a thread.
Regards,
Radhika. -
Getting Error while posting through BAPI_ACC_DOCUMENT_POST
Hi Folks,
I could not post an GL account using the BAPI function module BAPI_ACC_DOCUMENT_POST . The code was,
wa_docheader-bus_act = 'RFBU'.
wa_docheader-username = 'CHARAN'.
wa_docheader-comp_code = '0147'.
wa_docheader-doc_date = '20101006'.
wa_docheader-pstng_date = '20101006'.
wa_docheader-DOC_TYPE = 'SA'.
*wa_docheader-REF_DOC_NO = 'UNASSIGNED'.
wa_glaccnt-itemno_acc = '0010'.
wa_glaccnt-gl_account = '0000100632'.
wa_glaccnt-item_text = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
wa_glaccnt-itemno_acc = '0020'.
wa_glaccnt-gl_account = '0000100634'.
wa_glaccnt-item_text = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
*wa_pyaccnt-itemno_acc = '0000100634'.
*wa_pyaccnt-gl_account = '0001234567'.
*APPEND wa_pyaccnt TO i_pyaccnt.
wa_curamt-itemno_acc = '0010'.
wa_curamt-currency = 'USD'.
wa_curamt-curr_type = '00'.
wa_curamt-amt_doccur = 200 .
APPEND wa_curamt TO i_curamt.
wa_curamt-itemno_acc = '0020'.
wa_curamt-currency = 'USD'.
wa_curamt-curr_type = '00'.
wa_curamt-amt_doccur = 200.
APPEND wa_curamt TO i_curamt.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = wa_docheader
CUSTOMERCPD =
CONTRACTHEADER =
IMPORTING
OBJ_TYPE =
OBJ_KEY =
OBJ_SYS =
TABLES
accountgl = i_glaccnt
ACCOUNTRECEIVABLE =
accountpayable = i_pyaccnt
ACCOUNTTAX =
currencyamount = i_curamt
CRITERIA =
VALUEFIELD =
EXTENSION1 =
return = i_ret
PAYMENTCARD =
CONTRACTITEM =
extension2 = i_ext2
REALESTATE =
ACCOUNTWT =
The Output error i'm getting is :
Error in document : BKPFF $ BH2CLNT200 400.00 USD
Balance in transaction currency.
Please help me in posting the Gl document successfully. Help will be rewarded.
Thanks in advance.Total amount of internal table I_CURAMT-AMT_DOCCURR should be zero (Credit & Debit).
Edit : See [Accounting Document Interface |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=195726664] for reference.
Edited by: Vinod Kumar on Oct 8, 2010 1:04 PM -
Getting Error While Posting Net cash call
Hi All JVA Experts,
When I am Posting a Net Cash Call I am getting the bellow error:
Message no. F5A192 - Enter a business location
Message no. GJ125 - Error Detected in Batch Session.
Give your valuable suggesstions to maintain the relevant configuration related to business location.
Many Thanks.
Regards,
Raghavendra.M
SAP-Practice.Hi All,
This is Solved Thanks.
Regards,
Raghu. -
Getting error while posting invoice in T-code F-02
Hello,
When i try to post invoice in T-code F-02 gives me the error message"There is no item category assigned to account bank a/c/company"
Can any one suggest me why this is error came up and how to resolve this.
Thanks,
LaviHi,
I think u have activated doc splitting i.e. new gl acconting. Go to
Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Classify G/L Accounts for Document Splitting
And make setting for u r account. Also see all the nodes there are configured, to avoid any other error.
Regards -
Getting error while posting doc using BAPI BAPI_ACC_DOCUMENT_POST
Hi,
I am passing the value for posting key in BAPI through TAX_CODE field in ACCOUNTGL (parameter name under tables).
It is giving error "Tax code 01 in procedure TAXR0 is invalid".
Can anyone help me to solve this .Try in these :
BAPI_ACC_DOCUMENT_POST error
Error in using BAPI_ACC_DOCUMENT_POST (urgent!!)
BAPI_ACC_DOCUMENT_POST - Check error
Regards
Neha -
He seniors,
I am getting error while posting stock in T. code- MB1C
Error- G/L account 799999 dose not exists in company code.
dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
thanks......Dear Sundyeep,
As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
CHART OF ACCOUNTS (MOST URGENT)
Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
Thanks,
Davinder
Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM -
Error while posting material in MB1c
Hi
how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
Kindly help.
Thanx.Hi Mukesh
In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
This should solve your problem
Rukshana -
I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hemaMarking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist
Maybe you are looking for
-
Excise Invoice and RG Registers
Hi SD Guru's My client is into Electrical installation services , I would like to know whether Excise invoices and the RG registers are need to be updated. The nature of business of the company is procuring trading material from the vendors and do th
-
Advance Receive from Customer against Sales Order
HI FI Expert customer pays advance how do we track the payment against sales order. Sales Order Filed Mandatory done for Posting key 19 in T code FBKP, after this at the time of transaction error message coming Rules for posting key 19 and acct 2260
-
Qosmio X300-14U - XP drivers available?
Is there any XP drivers for Toshiba Qosmio X300-14U or could I use Vista drivers for Windows 7? Thanks in advance
-
Bex Web Application Designer launched from desktop NOT SSO (single sign-on)
NW 2004s BI 7.0 The SSO from the Portal to BI/BW is working correctly, The SSO from BI/BW to the POrtal is working correctly. The problem is from the desktop, launching Bex Web Application DEsigner, it prompts to Logon to the BI system, then when you
-
I want to download Minecraft but my ipod isn't a high enough IOS what do I do?