Getting error while reading the positional flat files

Hi,
I have a requirement to read a Positional Flat file and convert into XML through oracle B2B. I have created a positional flat file .ecs, XSD and parser .ecs file using the blog http://anuj-dwivedi.blogspot.in/2011/10/handling-positionaldelimited-flat-files.html and updated the same in the server.
I have created a agreemnt for inbound scenario But while testing the inbound scenario i am getting an error in B2B as :
Error Code     B2B-50083
Error Description     Machine Info: Description: Document protocol identification error.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Document protocol identification error.
I have tried all the possible ways but getting the same error.
Please guide me to overcome this.
Thanks,
Nishanth

Nishanth,
Have you followed the step#2 correctly -
Copying the parser ecs in the installation directory and adding an entry in XERegistry.xml (of all machines if domain is spanned across multiple machines)
Also make sure that you have provided Identification Value, Identification Start Position and Identification End Position correctly in Document Defintion. Please remember that start position starts from 1 (instead of 0)
Regards,
Anuj

Similar Messages

Getting Error While Creating the Rule Repository File in SOA OrderBooking

Hi,
I am creating a SOA OrderBooking Demo Application by following the OrderBooking Tutorial. In Chapter 8.10 Set up Oracle Business Rules when i open the "http://host:port/ruleauthor" link here In the Repository tab:
■ Repository Type: select File.
■ File Location: enter
SOADEMO\SOAOrderBooking\bpel\rules\oracle\sample_
repository. (SOADEMO refers to the directory where you are building the
SOA Order Booking application.) Rule Author will create the sample_repository file.
but in my C:\Downloads\jdevhome\jdev\mywork\SOADEMO\SOAOrderBooking\bpel
I dont have rules\oracle\sample_repository file in it. I created rules and oracle folder there but when i gave the sample_repository path on the ruleauthor page i got the error of "invalid directory path".
I also tried to give the sample_repository path from (here i unzipped the demo application) my
" C:\Documents and Settings\usareen\Desktop\BPEL Tutorials\soademo_101310_prod\SOADEMO\SOAOrderBooking\bpel\rules\oracle\sample_repository"
But it still shows the directory path error.
Please help me out.
thanks

Hi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel

I am getting some errors while distilling the post script file.

I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 0.
   No problems were found in the document.
   This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack

@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

MDS-00521 - error while reading the document in Oracle ADF at Runtime

Hi All,
we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0
we are getting below error message while opening the page at run time.
MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository.
MDS-00569 : unable to read document app1/screen1.jsff from file "D:Oracle/Middleware11115_1/user_projects/domains/j2eeprd1/servers/app1j2eeprd1/.....
WEB-INF/Lib/ADFViewControllerapp1.jar!/app1/screen1.jsff
Note : we disable 1) Enable User Customizations and 2) Enable seeded customization in Project properties -> ADF View
can you please help us to resolve this issue.!
Thanks,

This seems issue with MDS schema. You can try two things:
- Restart everything again (database and admin server as well)
- If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
This is what I suspect. Other experts can jump in with better solution.
regards,
GP

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Bank Analyzer - Error while creating the Position Structure

Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John Crawford

Hi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

"The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

Hi Techys,
can you give me the suugestions for below error in sharepoint 2010.
Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
User having the contribute permission.
as a admin i can open the document without any error.
user wants to open the document via online and VPN connection.
while the user seeing the document info the below error is indicationg .
Offline Copy, Work book is readonly Mode.
The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
Many Thanks,
Madhu

Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
--Cheers

BAPI_ALM_ORDER_MAINTAIN - Error while reading the standard sequence

Hi all,
I am using BAPI_ALM_ORDER_MAINTAIN to add the task list to the order without deleting the existing operations but BAPI_ALM_ORDER_MAINTAIN is giving the error - Error while reading the standard sequence from the document. Please help asap.
Thanks,
Ritu

I Solved this form.
Table I_N_METHODS
REFNUMBER   OBJECTTYPE   METHOD      OBJECTKEY
000001                                    SAVE          000001000069
000001           OPERATION     CREATE       0000010000690170
000002           OPERATION     CREATE       0000010000690180
000003           OPERATION     CREATE       0000010000690190
000004           OPERATION     CREATE       0000010000690200
000005           OPERATION     CREATE       0000010000690210
Edited by: Yonatan Edgardo Diaz on Apr 16, 2010 4:01 PM

Getting error while exporting the report

Hi,
I am facing error while exporting the report. Getting below error.
"No data can be exported because there are no rows.Operation failed."
how come this error is coming even though my report contains data.
please do the needful.
i am using the version discoverer 10g.
Thanks,
RC.

I am having the same problem. I found this article in which the user was exporting 100,000 plus records and had the same issue exporting (Discoverer workbook exported to excel error - No dta can be exported and they were able to fix it by adjusting two memory settings in their pref.txt file. However, in my report there are only 1,100 records with eleven columns being returned. I export much larger reports on a daily basis.
Originally, the report was returning records and when I would go to retrieve all records it would tell me that all the rows could not be returned and the data may be incomplete. After scrubbing my SQL I no longer get that message, but the report still will not export and I get the same error as you.
I have not tried the pref.txt settings fix but may try it today to see if that is a workaround. I will then have to evaluate whether it is a good fix or just a band-aid.

Getting Error While deploying the BPEL process

Hi All,
I am getting the following error while deploying the BPELProcess. The BPEL process is simple one which is having a Recieve from client and another Recieve from FTPAdapterfor Recieve Operation.
Help me in resolving this. Thankyou.
Process "BPELProcess3" (revision "v2009_02_02__34994") successfully compiled.
<2009-02-02 09:51:06,356> <INFO> <default.collaxa.cube.engine.deployment> Process "BPELProcess3" (revision "v2009_02_02__34994") successfully loaded.
<2009-02-02 09:51:18,088> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Correlation definition not registered.
The correlation set definition for operation "Get", process "BPELProcess3", has not been registered with the process domain.
Please try to redeploy your process to the process domain.
ORABPEL-03802
Correlation definition not registered.
The correlation set definition for operation "Get", process "BPELProcess3", has not been registered with the process domain.
Please try to redeploy your process to the process domain.
at com.collaxa.cube.engine.delivery.CorrelationRegistry.resolve(CorrelationRegistry.java:91)
at com.collaxa.cube.engine.delivery.DeliveryHelper.createCorrelationSet(DeliveryHelper.java:94)
at com.collaxa.cube.engine.delivery.SOAPProtocolHandler.calculateCorrelations(SOAPProtocolHandler.java:751)
at com.collaxa.cube.engine.delivery.SOAPProtocolHandler.receiveCallback(SOAPProtocolHandler.java:167)
at com.collaxa.cube.engine.delivery.DeliveryService.receiveCallback(DeliveryService.java:446)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.receiveCallback(CubeDeliveryBean.java:99)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.receiveCallback(Unknown Source)
at com.collaxa.cube.engine.delivery.DeliveryHandler.continuePostAnyType(DeliveryHandler.java:416)
at com.collaxa.cube.engine.delivery.DeliveryHandler.continuePost(DeliveryHandler.java:370)
at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler.java:88)
at com.collaxa.cube.ejb.impl.DeliveryBean.post(DeliveryBean.java:201)
at com.collaxa.cube.ejb.impl.DeliveryBean.post(DeliveryBean.java:156)
at sun.reflect.GeneratedMethodAccessor214.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DeliveryBean_RemoteProxy_4bin6i8.post(Unknown Source)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:195)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase$DeliveryServiceMonitor.send(AdapterFrameworkListenerBase.java:2543)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.executeDeliveryServiceSend(AdapterFrameworkListenerBase.java:569)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.deliveryServiceSend(AdapterFrameworkListenerBase.java:625)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.performSingleActivation(AdapterFrameworkListenerImpl.java:952)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.onMessage(AdapterFrameworkListenerImpl.java:799)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:826)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:228)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
at java.lang.Thread.run(Thread.java:595)

Yes you are right. I do have two recieves and I think I need to set the Correlation set is it so ?
here is the code from my bpel file

<receive name="receiveInput" partnerLink="client"
portType="client:BPELProcess3" operation="initiate"
variable="inputVariable" createInstance="yes">
</receive>

<receive name="Poll_For_Zip_File" partnerLink="FileBinaryRead"
portType="ns1:Get_ptt" operation="Get"
variable="Poll_For_Zip_File_Get_InputVariable"
createInstance="no" bpelx:headerVariable="MyInBoundHeader">
</receive>
Please let me know how can I add the correlation If I had to add in my bepl process.

Getting error while reading the positional flat files

Similar Messages

Maybe you are looking for