Getting error while running Oracle universal installer to run the deinstall
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?
This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?
Similar Messages
-
Mandrake Linux 8.0 - can't get Oracle Universal Installer to run
Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 525901824 116862976 409038848 0 6377472
61140992
Swap: 1069244416 0 1069244416
MemTotal: 513576 kB
MemFree: 399452 kB
MemShared: 0 kB
Buffers: 6228 kB
Cached: 59708 kB
Active: 63740 kB
Inact_dirty: 2196 kB
Inact_clean: 0 kB
Inact_target: 1072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 513576 kB
LowFree: 399452 kB
SwapTotal: 1044184 kB
SwapFree: 1044184 kB
User Limits (in bytes except for NOFILE and NPROC) -
RLIMIT_FSIZE : infinity
RLIMIT_DATA : infinity
RLIMIT_STACK : 2093056
RLIMIT_CORE : 0
RLIMIT_NOFILE : 1024
RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck! -
Cygwin X Server to run Oracle Universal Installer
Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
JimJimbo wrote:
Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
JimAs sb alluded to by giving a link to the site, you can use xming as your x-server. It's free, lightweight, and drop-dead simple to install. No bells and whistles. Just a solid x-server.
And once I discovered x11 port forwarding, I no longer even have to set DISPLAY to match the ever-changing DHCP-assigned ip address of my pc. I use PuTTY as my ssh client, and configure the session to allow x11 port forwarding. I can't remember the last time I had to monkey around with DISPLAY. -
Getting Error while installing oracle web cache
Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick -
Getting Error while installing oracle web cach
Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick -
Pb running Oracle Universal Installer on Linux
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
When I run the runInstaller for the iASv2linux.cpio.gz file, I have the following error :
"An error occured while trying to determine the Running process"
"Oracle9iAS installation has detected that the Entreprise Manager Website is running on this system. Install cannot continue unless the Entreprise Manager Website is shut down ..."
So, there 's no oracle process on my server, and when I try to stop it with emctl stop, I have a "connection refused".
Thank you for you help.
Patrick.Hi there!
For a lot of RedHat/Oracle Configuration issues you may want to refer to http://www.puschitz.com/ .
I had the same problem on SuSE Linux 9.1 installing Oracle 9i and they cause some headaches. If I remember correctly, it boils down to:
- export LD_ASSUME_KERNEL=2.4.1
- install compatibility libraries, then runInstaller
- [I had Oracle 9.2.0.1]: ignore the linking errors (or try to fix them by running the makefiles on the command line, i.e. make -f ins_rdbms.mk install)
- install the latest patch from metalink
- Linking should now succeed
Hope that helps,
Martin -
Getting Error while installing Oracle 11G in Win8 64bit OS
Hi All,
I am getting error (INS-13001 Environment does not meet minimum requirements) after I started installing the Oracle 11G Database in Windows 8 64bit.
A pop up is displayed with above message and Yes and No buttons. Can I continue eventhough the above message is displayed?
Please let me know whether Oracle 11G supports Windows 8 OS or not.?
also let me know, If any other alternative way to continue with 11G in Win8 OS
Thanks in advance your response on thisOracle 11g is not certified for windows 8.
You can also check in pre-requiste document from below link
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDGJEJE -
Getting error while configuring Oracle CEP server in Eclipse
Hi,
While Configuring OCEP Server in eclipse, and specifying the Oracle Middleware Home Directory as "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver"; I am getting the below error:
The location "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver" contains the BEA home definition file "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver/registry.xml," but that file does not contain an Oracle CEP component entry with an "InstallDir" attribute.
I tried re-installing OCEP server, but still the problem persists. Please help me on this.
Regards,
Swati
Edited by: 999706 on Apr 30, 2013 1:08 AMHi Swati,
Please make sure you installed:
1) Eclipse Indigo SR2 for Linux: http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/indigo/SR2/eclipse-jee-indigo-SR2-linux-gtk.tar.gz
2) Plugin in from the installation, the path like: Oracle/Middleware/ocep_11.1/eclipse-update-site/cep-tools=11.1.1.20130109-2314/. Note the plugin download site is not updated. So you can't use the install Plugin via URL
I assume you are using PS6. For other version, please check the document accordingly.
Thanks
Junger -
I am getting error while accesssing Oracle database
i am trying to learn by playing around with '
MORTGAGE LOAN APPLICATION.
in database i have taken oracle.
when i try to fire following query:
select * from customer where custId={$ /process_data/@custId $}
i am getting following error:
Exception: Internal error.. Cause: ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.Mehul
I've not worked with Oracle but I'll give this a shot. Try the following:
1) If the database you are querying is transcational, add the text (without quotes) "WITH (NOLOCK)" as part of your FROM clause. It may be possible for your DBAs to have set that any queries run without this to be rejected since it would result in locking the table.
2) I assume, by your query, that custId is of an integer type but if it is varchar (String) then make sure to put your single quotes around the parameter afte the '='.
I would ask the following:
Where are you firing the query from? Are you doing it as part of a webservice the form is connected to or are you doing it inside Workbench using one of the JDBC services (or another means)?
Josh Boyle
[email protected]
Cardinal Solutions Group -
Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration. -
Getting error while Calling Oracle Stored Procedure with output Parameter
HI All,
From long days i am working on this but i unable to solve it.
Even i have studied so many forums in SAP but i didn't find the solution.
I am calling Oracle Store procedure with 3 inputs and 1 output without cursor.
Store Procedure:-
CREATE OR REPLACE PROCEDURE PDS.send_rm
IS
proc_name VARCHAR2(64) := 'send_rm';
destination_system VARCHAR2(32) := 'RAWMAT';
xml_message VARCHAR2(4000);
status_code INTEGER;
status_message VARCHAR2(128);
debug_message VARCHAR2(128);
p_ret INTEGER;
BEGIN
DBMS_OUTPUT.PUT_LINE( proc_name || ' started' );
xml_message := '<RAW_MATERIAL>'||
'<BAR_CODE>10000764601</BAR_CODE>'||
'<MATERIAL>1101448</MATERIAL>'||
'<VENDOR_CODE/>'||
'<PRODUCTION_DATE>0000-00-00</PRODUCTION_DATE>'||
'<EXPIRE_DATE>0000-00-00</EXPIRE_DATE>'||
'<BATCH/>'||
'<PO_NUM/>'||
'<MATERIAL_DESCRIPTION>POWER SUPPLY</MATERIAL_DESCRIPTION>'||
'<SPEC_NAME/>'||
'<STOCK_CODE>BSW-JH</STOCK_CODE>'||
'<INSPECTION_LOT>00</INSPECTION_LOT>'||
'<USAGE_DECISION_CODE/>'||
'<MATERIAL_GROUP>031</MATERIAL_GROUP>'||
'</RAW_MATERIAL>';
dbms_output.put_line('XML '||xml_message);
-- vp_interface.load_rawmat@cnprpt1_pds(SYSDATE, destination_system,
-- xml_message, p_ret);
vp_interface.load_rawmat(SYSDATE, destination_system,
xml_message, p_ret);
dbms_output.put_line('Return Code '||p_ret);
COMMIT;
EXCEPTION
WHEN OTHERS THEN
status_code := SQLCODE;
status_message := SUBSTR(SQLERRM, 1, 64);
-- Extract_Error_Logger(proc_name, 'LOCAL', SYSDATE, -999,
-- status_message, 0, debug_message);
ROLLBACK;
END send_rm;
And while i am calling this Store procedure in MII, I am facing error.
I have tried different ways but didnt solved
In SQL Query, i kept mode as: FixedQueryOutput
Can anyone tell me or send code for calling above store procedure
And onemore thing, While creating store procedure in Oracle for MII. Do we need to Create output parameter as cursor or normal.
Thanks,
Kind Regards,
Praveen Reddy MHi Praveen
Our wrapper was created because we could not modify the procedure we call (it was not returning a cursor).
CREATE OR REPLACE PROCEDURE CHECK_PUT_IN_USE
(STRCMPNAME in varchar2,
STRSCANLABEL in varchar2,
RCT1 out SYS_REFCURSOR
AS
charDispo Char(1);
charStatus Char(1);
intCatNo Integer;
charCatDispo Char(1);
strCatQual VarChar2(2);
strCatDesc VarChar2(30);
strMsg VarChar2(128);
BEGIN
qa.check_put_in_use@AR(STRCMPNAME,
STRSCANLABEL,
charDispo,
charStatus,
intCatNo,
charCatDispo,
strCatQual,
strCatDesc,
strMsg);
OPEN RCT1
FOR Select charDispo,charStatus,charDispo,charStatus,intCatNo,charCatDispo,strCatQual,strCatDesc,strMsg from Dual;
END;
Hope this helps
Regards
Amrik
then with a FixedQueryWithOutput
call mixar.qasap.wrapper_update_put_in_use('[Param.1]','[Param.2]',[Param.3],?)
Hope this helps. -
Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
RaghavaHI All,
Please help on this issue.
Thanks
Raghava -
Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, AnuragHI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Oracle Universal Installer gives a fatal error
Hello,
When I start the Oracle Universal Installer to install the Oracle Developer Suite (10.1.2.0.2) I get a Microsoft Fault Report, so the installation will abort.
I had removed first the Oracle installation via the same wizard and then clean up my registry.Ok, I have found the problem: The installer can't write to c:\documents and settings\pieter\local settings\temp\...
The error is like this: "error in writing to c:\documents and settings\..."
Many users that install Oracle have this error (check google) but I can't find a solution :(
Anyone? -
Error while installinf oracle 10gr2 on Aix 5.2
Hi All ,
I am getting error while installing Oracle 10g Release 2 on aix 5200-04 OS. After starting ruinstaller a GUI window popus asking for type of installion / location of ORACLE_HOME & password for sample database. Then after pressing Next button GUI window disappears.
I am geeting below error on console ....
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks wi
ll be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2006-10-05_02
-20-46AM. Please wait ...$ Oracle Universal Installer, Version 10.2.0.1.0 Produc
tion
Copyright (C) 1999, 2005, Oracle. All rights reserved.
java.io.FileNotFoundException: /tmp/OraInstall2006-10-05_02-20-46AM/oui/instImag
es/images.properties (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:129)
at java.io.FileInputStream.<init>(FileInputStream.java:89)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.loadProperties(OiifmSp
lashScreen.java:444)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<clinit>(OiifmSplashSc
reen.java:93)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:259)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceMan
ager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManage
r(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstalle
r.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:
926)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClic
kInstaller.java:1957)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstall
er.java:2185)
Exception java.lang.ExceptionInInitializerError occurred..
java.lang.ExceptionInInitializerError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:259)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceMan
ager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManage
r(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstalle
r.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:
926)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClic
kInstaller.java:1957)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstall
er.java:2185)
Caused by: java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:460)
at java.lang.Integer.<init>(Integer.java:633)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<clinit>(OiifmSplashSc
reen.java:103)
... 7 more
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oii/oii
f/oiifm/OiifmSplashScreen
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:259)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceMan
ager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManage
r(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:
984)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClic
kInstaller.java:1957)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstall
er.java:2185)
Thanks & Regards
Walter Crastodoes the missing file exist anywhere ?
What does the Inventory log file say about firing up the installer.
Maybe you are looking for
-
Error message on LR5 CC startup
Same problem in LR4 and in LR5: On startup, I get a long error message in computer code. The message appears over the LR screen as I last used it. I cannot do anything in LR because of the error message--not even choose File/Quit. I must Force Quit t
-
Make a litlle program with sockets.
Hi All, I'm a newbie in java network applications and now I have a litlle problem. I start my SrvScan program, so I start my ScanSystem program. When ScanSystem connects at SrvScan, I have the following error: Exception in thread "main" java.lang.Nul
-
Thumbnails of PDF-Files are no longer available ...
Hi, Unfortunately, the thumbnails of the uploaded PDF files are no longer available ... Any hints ??? Kind Regards Holger
-
FI reports for mothly GL balances
Hi I want TCode for the report which gives month to year balances of GL. (For ex: Report must give PL item balances & BS balance for: Any month (Say February) From month to month (from December to February) From middle of month to last month of fisca
-
HOW TO TRANSFER DATA FROM CHAR TYPE TO NON CHAR TYPE
HI EXPORTS, THIS IS SASIDHAR, I HAD UPLOADED DATA FROM FLAT FILE INTO DYNAMICAL INTERNAL TABLE NAME <T_UPLOAD>. THIS INTERNAL TABLE FIELDS ARE CONVERTED INTO CHAR TYPE FIELDS. NOW I HAVE TO TRANSFER THIS DATA INTO ANOTHER INTERNAL TABLE <DY