Getting error wwc-40019
hai,
I installed successfully OCS-9.0.4.1.1. without any errors on windows as given follows
I)Infratructure and information storage in WINDOWS2003 server.
and
II) middle tier in the WINDOWS2000 professional. with 2 applications (1) files (2) email.
I have created subscriber and users. we are getting error when we synchornize files on my desktop to Oracle files, more over when i want to login into as end user i am getting the same erroras follows
<h3>ERROR:wwc-40019 web cache is down even it seems up </h3>
i dont know why it was happend.
any one please help me.
Hi,
The Oracle Portal Center can best address this issue.
Also, check out this similar thread:
re:Webcache error
Similar Messages
-
WebCache connection error (WWC-40019)
Dear All,
I installed Oracle9iAS Release 2 Portal & Wireless installation type on my PC and the Oracle Infrastructure on another PC. When i tried to follow the described steps to shutdown my Oracle9iAS instance and then the Infrastructure instance to increace the RAM size of the Infrastructre machine and when i tried to startup the infrastructure and then my portal instance. I faced with the problem that my portal instance can't connect to the web cache and got the following error message :
Error: Could not open web cache connection. The portal use-web-cache setting is set to ON while web cache
may be down. (WWC-40019)
Any help will be appreciated.
Regards,
Mohammed Amin
[email protected]Hi,
The Oracle Portal Center can best address this issue.
Also, check out this similar thread:
re:Webcache error -
(WWC-40019) web cache connection error
Dear All,
I installed Oracle9iAS Release 2 Portal & Wireless installation type on my PC and the Oracle Infrastructure on another PC. When i tried to follow the described steps to shutdown my Oracle9iAS instance and then the Infrastructure instance to increace the RAM size of the Infrastructre machine and when i tried to startup the infrastructure and then my portal instance. I faced with the problem that my portal instance can't connect to the web cache and got the following error message :
Error: Could not open web cache connection. The portal use-web-cache setting is set to ON while web cache
may be down. (WWC-40019)
Any help will be appreciated.
Regards,
Mohammed Amin
[email protected]This error could happen because of various causes. These are mentioned in the Config Guide.
Oracle9iAS Portal Configuration Guide Release 2 (9.0.2)
8.1 Oracle9iAS Web Cache related issues
Error: Could not open web cache connection. The portal use-web-cache setting is set to "on" while web cache may be down. (WWC-40019)
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgtroub.htm#1015385
Most often the reason is that of wrong Web Cache related config. info.in the Portal.
The following doc on scripts might help you address the config. issue
B.2 Oracle9iAS Web Cache configuration scripts
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgscript.htm#639250
If your problem is still not sovled you might want to read the following sections
6.4 Configuring Load Balancing Routers
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgmidfw.htm#1006335
6.8 Configuring Oracle9iAS Portal to Work with Oracle9iAS Web Cache
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgmidfw.htm#1009317
Hope this helps.
- Senthil -
SSO Login page Error : Unexpected errors (WWC-41400)
Hi,
I downloaded the zip file ssosdk.zip from download section of OTN for SSO and followed the steps in the Install document. All the process went through without any error. But when i tried to access my login URL, i am getting this error :Unexpected errors (WWC-41400)
.Even if i try to login using my ORCLADMIN username and its password i am getting the same error and remains in the same page.
while configuring the partner application i did not encounter any error. Kindly suggest me how to proceed further.
VijayThis also happened to me after I run ssodatan to change the logon_url port.
Can anyone provide some help with this?! -
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
I am using Oracle portal 9.0.2 version
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
Default Search Results Page
This Search Portlet
An unexpected error has occurred (WWS-32100)
User-Defined Exception (WWS-11230)
Unknown Exception (WWC-45131)
ORA-20101:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWPOB_API_PAGE", line 3369
ORA-01403: no data found
ORA-01403: no data found (WWC-11230)
No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Error: An unexpected error occurred: User-Defined Exception (WWC-43000)
Please help me with this one
P.S I tried to run inctxgrn.sql, but it did not solve the problemi solved the problem by runing 2 scripts as a portal user
You can refer to bug - 2418089. This was fixed in 9.0.2.3
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpageid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpagesiteid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
NOTE - The difference is the value of 'p_name' attribute. If u see carefully it is 'searchresultpagesiteid'. The first time u run this the value is 'searchresultpageid'. -
Authentication Error WWC-41452
We recently had to change IP addresses on our servers. Since then I get a WWC-4152 error for any attempt to connect outside our LAN. The message text:
The address for which this authentication request was mad does not match your IP address.
Our system is WIN/2K 8.1.7 & 3.0.8.
ThanksHello,
I just ran across this one again after solving it a year ago. Try this:
Login as both portal30 and portal30_sso and perform the following.
select lsnr_token,ls_login_url, url_cookie_ip_check from wwsec_enabler_config_info$;
You will see that url_cookie_ip_check='Y' which is the default. Note the value of lsnr_token (substitue for $1 below). To change the url_cookie_ip_check setting enter the following commands.
update wwsec_enabler_config_info$ set url_cookie_ip_check='N'
where lsnr_token='$1';
You must perform this change logged in as both portal30 and portal30_sso!
Good Luck!
Trenton -
Payables Open Interface Import getting errors out
Hello All,
I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
(Insert ap inv dists 1a) Inside the insert function
(Insert ap inv dists 1) Insert into ap_invoice_distributions
(Insert ap inv dists 1) Insert into ap_invoice_distributions
ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
(Create Lines 22) Insert into ap_invoice_distributions
create_non_item_lines<-Import_invoices<- Before report trigger
Any one faced this kind of issue?
any suggestions to resolve this.
Thanks & Regards
AboothahirPl post details of OS, database and EBS versions.
Pl see these MOS Docs
Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated (Doc ID 357784.1)
APXIIMPT Payables Open Interface Import Fails ORA-00001 (Doc ID 353052.1)
Unique Constraint Violated Importing Invoices With Multi Line Distribution Set (Doc ID 386323.1)
HTH
Srini -
Excel service and OWA - getting ERROR while trying to open/edit Excel documents
Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
Trust level: Full
Application Virtual Path: /x
Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
Machine name: VHYDMANTHSTP-02
Process information:
Process ID: 1252
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: ArgumentException
Exception message: An entry with the same key already exists.
at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
Request path: /x/_layouts/xlpreview.aspx
User host address: 10.81.138.92
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 13
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176 -
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
Getting error while schedule a webi report
Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
RegardsHi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj -
Getting error while testing a outbound file in oracle B2B11g
Hi,
I am trying to configuare a outbound scenario in oracle B2B 11g.
I have created .ecs file and .xsd file and created a document type also and i am using generic file 1.0 as a lintening channel protocol and trying to read the input xml document from a perticular path.
I had setup partner and agreement also. everything is working fine and also file is succesfully polling from the source folder but i am getting error in B2B as :
B2B-50083
Error Description Machine Info: (infva0325) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
Can anyone guide me how to resolve this error?
I had tried everything but of no use.
Please do reply me with your suggestions.Hi Anuj,
Please find below xml data which will be saved as .txt file for outbound processing. Let me know if there are any changes i have to do. Please let me know if you need any further information. Listening channel is reading the file but in agreement level it is failing.
<?xml version="1.0" encoding="UTF-8"?><Transaction-DESADV XDataVersion="1.0" Standard="EDIFACT" Version="D93A" CreatedBy="ECXEngine_837" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" CreatedDate="2011-12-14T12:59:40" GUID="{2d323135-3336-3630-3232-313938393033}" xmlns="urn:oracle:integration:b2b:099C29D4C4ED419194917C20ADF8ABC3">
<Internal-Properties>
<Data-Structure Name="Interchange">
<Property Name="InterchangeSenderID">senderID</Property>
<Property Name="InterchangeSenderQual">senderQuali</Property>
<Property Name="InterchangeReceiverID">RecieverID</Property>
<Property Name="InterchangeReceiverQual">RecieverQuali</Property>
<Property Name="RepeatingSeparator"/>
<Property Name="InterchangeApplicationRef">DESADV</Property>
<Data-Structure Name="Transaction">
<Property Name="TransactionID">DESADV</Property>
<Property Name="TransactionControllingAgency"/>
<Property Name="TransactionMessageVersionNumber">D</Property>
<Property Name="TransactionMessageReleaseNumber">93A</Property>
<Property Name="TransactionAssociationAssignedCode"/>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
<Segment-UNH>
<Element-0062>#ControlNumber#</Element-0062>
<Composite-S009>
<Element-0065>DESADV</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>93A</Element-0054>
<Element-0051>UN</Element-0051>
<Element-0057>EDIT30</Element-0057>
</Composite-S009>
</Segment-UNH>
<Segment-BGM>
<Composite-C002>
<Element-1001>351</Element-1001>
</Composite-C002>
<Element-1004>3364382</Element-1004>
</Segment-BGM>
<Segment-DTM>
<Composite-C507>
<Element-2005>137</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>SH</Element-3035>
<Composite-C082>
<Element-3039>7393142020009</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>CN</Element-3035>
<Composite-C082>
<Element-3039>7350056030012</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_10>
<Segment-CPS>
<Element-7164>1</Element-7164>
</Segment-CPS>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>1</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210587</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>2</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210510</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>3</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>081349</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>JF074</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20160905</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>4</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>051596</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>116812505</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20150131</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
</Loop-Group_10>
<Segment-CNT>
<Composite-C270>
<Element-6069>2</Element-6069>
<Element-6066>4</Element-6066>
</Composite-C270>
</Segment-CNT>
<Segment-UNT>
<Element-0074>#SegmentCount#</Element-0074>
<Element-0062>#ControlNumber#</Element-0062>
</Segment-UNT>
</Transaction-DESADV> -
Getting Error while posting through KB11N : No true sender object entered
HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose. -
While activating a request in DSO getting error code 10
While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal PardeshiCheck the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra. -
iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Visual Studio 2005 deploy Crystal Report to Windows Server 2008 64-bit
I've read a lot of posts here regarding deploying on a 64-bit server, but I'm still confused. We use Visual Studio 2005 to develop on a Windows XP machine. We use the built-in version of Crystal that comes with VS2005. We want to deploy the runtime
-
Internal drive disappeared. Shows up as "Media" & 0 bytes
I recently installed a 120GB SSD drive instead of my 640GB rotational hard disk drive. I then removed my optical drive, and put the 640GB drive in its place using an internal adaptor that fits into that space. I installed OS X on the 120GB drive. Eve
-
No email body in mail for exchange? Nokia E52
On my Nokia E52 i have setup mail for exchange access to gmail, but all it seems to download is the header with who its from and the subject? There isnt any mention of the email body/message at all? My contacts and calendar all sync properly. Am i mi
-
Best Monitor for Image Editing?
Hi people! Since Apple is making super-bright-extra-saturated monitors since the LED technology, I'm wondering which monitor would be good for image editing. I noticed that the LED one has too much contrast and the images looks like "already edited"
-
Changing the color of a JButton when it is pressed
Hey all, What I want to do probably is fairly simple, but I just can't seem to get the job done. I want to create JButtons which have a specific color (let's say Color.blue), which is dark blue when it is not pressed and becomes lighter blue when it